Cutters / Indexable End Mills（work material：Titanium）

• You can add up to 6 items per a category to the compare list. Compare

  

  MFH Type High Feed Cutter MFH Mini End Mill

  KYOCERA

  [Features]· Economical with double-sided 4 corners.· With a small diameter / multi-flute specification, machining can be realized with high efficiency/feed even when using small machining centers.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	16 ～ 32	Titanium	-	79 ～ 200	2 ～ 6	With handle	16 ～ 32	20 ～ 120	-	-

  From: 5,572,296 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 63	Titanium	-	90 ～ 190	2 ～ 6	With handle	16 ～ 32	25 ～ 90	-	Carbide Coat / No Carbide Coat

  From: 6,288,141 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WEX2000F Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 63	Titanium	Rough and medium rough processing	-	-	Arbor	-	-	10	-

  From: 12,273,924 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Standard Type WMM2000E

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for cutting stainless steel, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	20 ～ 30	Titanium	Rough and medium rough processing	130 ～ 150	3 ～ 5	With handle	20 ～ 25	35 ～ 50	17～35	-

  From: 5,573,262 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC(F)-RS

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The high precision of the body and inserts allows for high-quality machining.·This product has high sharpness and strength, and a wide variety of insert items can meet a wide range of needs.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	32 ～ 63	Titanium	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	4 ～ 6	-

  From: 5,870,112 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater for WRX Type, WRX-R (S)

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 100	Titanium	Rough and medium rough processing	-	8 ～ 24	Arbor	-	-	27 ～ 53	-

  From: 15,921,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  CoroMill 390 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	80mm ～ 160mm	Titanium	Finishing	50 ～ 63	7 ～ 12	Arbor	25.4 ～ 50.8	-	15.4 ～ 15.7	Carbide Coat

  From: 26,023,926 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CERATIZIT MaxiMill 274 Milling Cutter

  OSG

  [Specifications]・ Shape: Cutter・ Indexable end mill[Applications]Plane, groove, chamfer

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	18.9 ～ 123.7	Titanium	Rough to Finish Processing	40$40.7 ～ 98.7	3 ～ 12	With handle / Arbor	20 ～ 25	25.7 ～ 40.7	-	Carbide Coat

  From: 9,116,718 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C

  SANDVIK

  Shoulder face milling cutter with amazing performance● Wide range of applicationsCapable of face milling, shoulder milling, grooving and contouringImproved proximity with the introduction of an oversized cutter● Amazing productivityAchieves high cutting conditions with a highly rigid bodyHigh insert mounting rigidity due to flat insert seat● Outstanding machining accuracyLow resistance and high accuracy due to sharp tipBoth the bottom and sides are processed with high precision●GC4330, GC4340CVD grade for steel milling, ideal for versatile CoroMill® 490The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	20 ～ 100	Titanium	Rough and medium rough processing / Finishing	-	2 ～ 10	Centering Plug	-	23 ～ 70	5.5 ～ 10	-

  From: 12,409,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting

  SANDVIK

  Suitable not only for general milling but also for mold making, first recommendation for roughing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 mm ～ 160 mm	Titanium	Rough and medium rough processing / Finishing	50 ～ 63	3 ～ 8	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 15,998,818 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32

  SANDVIK

  Sandvik, cutter / indexable end mill, CoroMill 331, full side cutter, processing width of 6.0 to 12.0 mm, 331.32.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	Titanium	Finishing	-	6 ～ 16	Arbor	27 ～ 50	-	-	Carbide Coat

  From: 38,248,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 End Mill Threaded-Type Coupling R390-T

  SANDVIK

  [Features]Rivals the performance of solid end millsHigh precisionNo miss-matchesShoulder cuttingGroovingProfilingHelical machiningLappingCan be used for all types of machiningThreaded-type coupling

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 42	Titanium	Rough and medium rough processing / Finishing	-	2 ～ 4	Centering Plug	8 ～ 16	25 ～ 45	10	Carbide Coat

  From: 10,338,223 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A

  SANDVIK

  Shoulder milling cutter for aluminum alloySerrated tip mounting for high reliability and reduced impact of tip tolerance on cutter diameter

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 mm ～ 40 mm	Titanium	Finishing	125 ～ 150	2 ～ 3	With handle	25 ～ 32	-	12	Carbide Coat

  From: 21,371,070 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling holder MRX type

  KYOCERA

  【特長】・MRX型：低抵抗設計で良好な切削性、高能率加工を実現するラジアスカッタ【用途】・ラジアスエンドミル・R削り・倣い・掘込み・平面削り【商品仕様】・スクリュークランプ方式・モジュラータイプ・適合チップ：RDMT0803/RDGT0803・JANコード：4960664712380・トラスココード：824-9447

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Inclined Cuts	20 ～ 32	Titanium	-	48 ～ 62	2 ～ 4	Shell Type	-	30 ～ 40	-	Carbide Coat

  From: 6,903,859 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing Ball Cutter, End Mill Model

  MISUMI

  [Features]·Easy to manage due to the main and secondary cutting edges composed by 1 type of insert·A wide variety of small diameters from ø10

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Inclined Cuts	16 ～ 25	Titanium	Rough and medium rough processing	200 ～ 250	2	With handle	20 ～ 32	27 ～ 40	14.4 ～ 22.3	Carbide Coat

  From: 12,901,928 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Finishing Ball Cutter, End Mill Model

  MISUMI

  [Features]·Tip exchange type ball cutter end mill type holder for finish·Shank material can be selected from steel and carbide according to application·Outer diameter: ⌀8 to ⌀32·Number of Flutes: 2 flutes·Compatible tip: NFBM-8 to 32

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Inclined Cuts	10 ～ 16	Titanium	Finishing	123 ～ 132	1	With handle	12 ～ 16	-	-	Carbide Coat

  From: 9,317,676 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC Phoenix Series Round Cutter Screw-in Type

  OSG

  A screw-in type cutter. For side cutting, grooving, engraving, shape cutting, etc.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove / Vertical	10 ～ 30	Titanium	-	33 ～ 40	2 ～ 4	Centering Plug	-	-	-	Carbide Coat / No Carbide Coat

  From: 9,331,393 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type

  OSG

  The wide insert pocket improves chip removal capability, and the employment of a body relief shape that supports 3D machining enables highly efficient shape machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	10 ～ 88	Titanium	-	40 ～ 250	2 ～ 10	With handle / Arbor	20 ～ 42	50 ～ 120	-	Carbide Coat / No Carbide Coat

  From: 6,032,799 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3042B SL F3000 Series Positive Mill Neo Shell Type

  OSG

  Shell type that uses inserts with a 3-dimensional chip breaker with good cutting performance. Used in arbor for face mill.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	50	Titanium	-	40	5	Arbor	-	-	-	Carbide Coat / No Carbide Coat

  From: 22,531,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS

  OSG

  An end mill type that uses a sharp, 3D breaker tip. Addition of a 20 mm shank with multi-flute specification with a small tip that is convenient for small machines.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	20	Titanium	-	100	3	With handle	20	30	-	Carbide Coat / No Carbide Coat

  From: 5,184,741 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS

  OSG

  An end mill type that uses inserts with a 3D chip breaker with good cutting performance. There are a wide range of applicable inserts.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	32 ～ 63	Titanium	-	150 ～ 200	3 ～ 4	With handle	32	45	-	Carbide Coat / No Carbide Coat

  From: 14,890,117 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type

  OSG

  Threaded type for shoulder milling cutter. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 40	Titanium	-	27 ～ 40	2 ～ 6	Centering Plug	-	-	-	Carbide Coat / No Carbide Coat

  From: 7,603,605 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type

  OSG

  Indexable high-feed radius cutter, threaded type. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 46.4	Titanium	-	140 ～ 300	2 ～ 5	With handle	25 ～ 42	40 ～ 180	-	Carbide Coat

  From: 5,718,638 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC Phoenix Series High Feed Radius Cutter Screw-in Type

  OSG

  PHC threaded type radius cutter. Machining applications: Surface, side surface, groove, digging, shape cutting

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 28.2	Titanium	-	35 ～ 40	2 ～ 4	Centering Plug	-	-	-	Carbide Coat

  From: 12,276,481 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC BORE Phoenix Series High Feed Radius Cutter Bore Type

  OSG

  PHC bore type radius cutter. Machining applications: planes, sides, grooves, carving, shape shaving

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	23.4 ～ 83.4	Titanium	-	40 ～ 63	3 ～ 8	Arbor	-	-	-	Carbide Coat

  From: 9,704,373 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Bore (rough machining long blade type), WBMR2000L Type

  SUMITOMO ELECTRIC HARDMETAL

  A sharp, low-resistance, wave blade type with a high rake angle. Strong anti-rotation mechanism suppresses tip movement while cutting.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 50	Titanium	Rough and medium rough processing	140 ～ 350	-	With handle	25 ～ 50.8	60 ～ 250	30～69	-

  From: 10,004,960 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Bore (rough machining short blade type), WBMR2000 Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Low resistance, sharp wave-shaped edge and high rake angle.・ Insert size with high cutting edge strength and cost-effective M class insert.・ A strong anti-rotation mechanism suppresses the insert movement during cutting.・ For large diameter sizes (ø40, ø50), the insert shape with the integrated main and auxiliary cutting edges is adopted to facilitate tool management.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 50	Titanium	Rough and medium rough processing	140 ～ 350	-	With handle	25 ～ 50.8	60 ～ 250	20～47	-

  From: 6,866,693 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WEX2000E/EL Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	14 ～ 63	Titanium	Rough and medium rough processing	80 ～ 180	1 ～ 8	With handle	16 ～ 32	25 ～ 60	10	-

  From: 4,343,371 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater, WRX2000E Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Realizes low resistance and low vibration machining by optimizing the cutting edge placement.・ The lead groove and special pocket shape achieves both smooth cutting chip discharge and high body rigidity.・ With a bottom blade support surface, bottom blade loss is reduced and high-reliability is achieved.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	20 ～ 40	Titanium	Rough and medium rough processing	120 ～ 160	4 ～ 16	With handle	20 ～ 42	40 ～ 50	18～36	-

  From: 10,195,975 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Repeater, WRX2000R Type

  SUMITOMO ELECTRIC HARDMETAL

  Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead groove and special pocket shape.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 50	Titanium	Rough and medium rough processing	-	10 ～ 16	Arbor	-	-	18～36	-

  From: 18,465,673 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill Head WEX2000M Type

  SUMITOMO ELECTRIC HARDMETAL

  Supports various combinations of carbide arbors and steel arbors. Screw mount type enables easy replacement.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 40	Titanium	Rough and medium rough processing	42 ～ 63	2 ～ 6	Centering Plug	8.5 ～ 17	25 ～ 40	10	-

  From: 5,403,690 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Radius Mill WRCX Type WRCX08000E

  SUMITOMO ELECTRIC HARDMETAL

  Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	20 ～ 25	Titanium	Rough and medium rough processing	130 ～ 180	2 ～ 3	With handle	20 ～ 25	50 ～ 100	4	-

  From: 5,658,048 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Radius Mill WRCX Type WRCX10000E

  SUMITOMO ELECTRIC HARDMETAL

  Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	25 ～ 32	Titanium	Rough and medium rough processing	130 ～ 200	2 ～ 3	With handle	25 ～ 32	50 ～ 120	5	-

  From: 5,954,898 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Radius Mill WRCX Type

  SUMITOMO ELECTRIC HARDMETAL

  Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	20 ～ 32	Titanium	Rough and medium rough processing	49 ～ 63	2 ～ 3	Centering Plug	10.5 ～ 17	30 ～ 40	4 ～ 5	-

  From: 5,658,048 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi UFO End Mill, UFO Model UFO-ER

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·An end mill with a handle for general-purpose milling and slab milling, grooving, and chamfering of difficult-to-cut materials.Overall length (L) (mm): 120Shank diameter (d) (mm): 32Maximum cutting depth (Ad) (mm): 5.5

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 80	Titanium	Rough and medium rough processing	120	4 ～ 6	With handle	32	40	5.5	-

  From: 13,673,387 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi UFO Mill, UFO Model UFO-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]Finish category: coarse / medium coarse millingRake angle: radial/-7°, axial/27°

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 250	Titanium	Rough and medium rough processing	-	4 ～ 12	Arbor	-	-	5.5 ～ 7.5	-

  From: 12,475,365 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, EHG Model EHG-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.Maximum cutting depth (Ad) (mm): 5.5cutting diameter D (⌀): 80, 100, 125, 160, 200

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 200	Titanium	Rough and medium rough processing	-	4 ～ 10	Arbor	-	-	5.5	-

  From: 10,722,003 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-E

  SUMITOMO ELECTRIC HARDMETAL

  Low resistance insert with reinforced cutting edge, high-precision cutting edge, high durability body, a wide range of insert variations, and all part numbers equipped with air holes.[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	25 ～ 63	Titanium	Rough and medium rough processing	120 ～ 220	2 ～ 6	With handle	20 ～ 42	25 ～ 80	14	-

  From: 5,340,149 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC-EW

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·This general-purpose cutter with a handle provides high performance and machining accuracy and can be used in a wide range of applications.Maximum cutting depth (Ad) (mm): 4, 6

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	20 ～ 63	Titanium	Rough and medium rough processing	100 ～ 125	2 ～ 6	With handle	20 ～ 32	40	4 ～ 6	-

  From: 5,318,903 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-F

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40 ～ 63	Titanium	Rough and medium rough processing	-	4 ～ 6	Arbor	-	-	14	-

  From: 8,117,830 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEXF-R

  SUMITOMO ELECTRIC HARDMETAL

  Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	80 ～ 125	Titanium	Rough and medium rough processing	-	7 ～ 9	Arbor	-	-	14	-

  From: 12,740,346 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	80 ～ 125	Titanium	Rough and medium rough processing	-	4 ～ 6	Arbor	-	-	14	-

  From: 11,574,193 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGCF-R

  SUMITOMO ELECTRIC HARDMETAL

  Achieves world class performance and machining precision as a general purpose cutter that is usable in a wide range of applications.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 200	Titanium	Rough and medium rough processing	-	8 ～ 20	Arbor	-	-	6	-

  From: 15,581,764 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WGC Model WGC-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·The high precision body and inserts enable high-quality machining, providing both sharpness and strength at a high level.·The lineup of products with a reinforced small diameter is suitable for machining small accessories.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 200	Titanium	Rough and medium rough processing	-	4 ～ 8	Arbor	-	-	4 ～ 6	-

  From: 9,305,229 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Radius Mill, WRCX Model WRCX-E

  SUMITOMO ELECTRIC HARDMETAL

  A multi-functional cutter that efficiently performs a variety of machining, such as mold engraving, ramping, and helical milling.[Features]・ A highly durable body with special surface treatment significantly improves the lifespan and reliability.・ Resistant to chatter with anti-vibration edge design.・ All sizes have air holes to prevent cutting chip clogging and jamming.・ Insert mounting ensures stable machining with a robust screw clamp that uses Torx cross-head screws.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	40 ～ 50	Titanium	Rough and medium rough processing	170 ～ 250	2 ～ 3	With handle	32	50	8	-

  From: 8,499,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	OSG	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	MFH Type High Feed Cutter MFH Mini End Mill	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	SEC-Wave Mill WEX2000F Type	SEC-Wave Multifunctional, Standard Type WMM2000E	Used for SEC-Wave Mill, WGC Model WGC(F)-RS	SEC-Wave Repeater for WRX Type, WRX-R (S)	CoroMill 390 Cutter	CERATIZIT MaxiMill 274 Milling Cutter	End Mill & Shoulder Cutter, Diameter: 20-84 mm Coromant Capto 490-C	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	CoroMill 331 Full Side Cutter, Machining Width: 6.0-12.0 mm 331.32	CoroMill 390 End Mill Threaded-Type Coupling R390-T	CoroMill 790 (Aluminum End Mill) Shoulder Cutting / End Mill Cylindrical Shank R790-A	Milling holder MRX type	Roughing Ball Cutter, End Mill Model	Finishing Ball Cutter, End Mill Model	PRC Phoenix Series Round Cutter Screw-in Type	PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type	F3042B SL F3000 Series Positive Mill Neo Shell Type	F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS	F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS	PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type	PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type	PHC Phoenix Series High Feed Radius Cutter Screw-in Type	PHC BORE Phoenix Series High Feed Radius Cutter Bore Type	SEC-Wave Bore (rough machining long blade type), WBMR2000L Type	SEC-Wave Bore (rough machining short blade type), WBMR2000 Type	SEC-Wave Mill WEX2000E/EL Type	SEC-Wave Repeater, WRX2000E Type	SEC-Wave Repeater, WRX2000R Type	SEC-Wave Mill Head WEX2000M Type	SEC-Wave Radius Mill WRCX Type WRCX08000E	SEC-Wave Radius Mill WRCX Type WRCX10000E	SEC-Wave Radius Mill WRCX Type	Used for SEC-Sumi UFO End Mill, UFO Model UFO-ER	Used for SEC-Sumi UFO Mill, UFO Model UFO-R	Used for SEC-Ace Mill, EHG Model EHG-R	Used for SEC-Wave Mill, WEX Model WEX-E	Used for SEC-Wave Mill, WGC Model WGC-EW	Used for SEC-Wave Mill, WEX Model WEX-F	Used for SEC-Wave Mill, WEX Model WEXF-R	Used for SEC-Wave Mill, WEX Model WEX-R	Used for SEC-Wave Mill, WGC Model WGCF-R	Used for SEC-Wave Mill, WGC Model WGC-R	Used for SEC-Wave Radius Mill, WRCX Model WRCX-E
From	5,572,296 VND	6,288,141 VND	12,273,924 VND	5,573,262 VND	5,870,112 VND	15,921,105 VND	26,023,926 VND	9,116,718 VND	12,409,955 VND	15,998,818 VND	38,248,384 VND	10,338,223 VND	21,371,070 VND	6,903,859 VND	12,901,928 VND	9,317,676 VND	9,331,393 VND	6,032,799 VND	22,531,394 VND	5,184,741 VND	14,890,117 VND	7,603,605 VND	5,718,638 VND	12,276,481 VND	9,704,373 VND	10,004,960 VND	6,866,693 VND	4,343,371 VND	10,195,975 VND	18,465,673 VND	5,403,690 VND	5,658,048 VND	5,954,898 VND	5,658,048 VND	13,673,387 VND	12,475,365 VND	10,722,003 VND	5,340,149 VND	5,318,903 VND	8,117,830 VND	12,740,346 VND	11,574,193 VND	15,581,764 VND	9,305,229 VND	8,499,466 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Machining Application	-	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Groove	Plane / Side / Groove	Side	Plane / Inclined Cuts	Inclined Cuts	Inclined Cuts	Side / Groove / Vertical	Plane / Side / Groove / Vertical	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Plane / Side / Groove / Vertical	Groove	Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove	Plane / Groove	Plane / Groove	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Groove / Chamfer	Plane / Groove / Chamfer	Plane / Groove
blade diameter D(φ)	16 ～ 32	16 ～ 63	40 ～ 63	20 ～ 30	32 ～ 63	50 ～ 100	80mm ～ 160mm	18.9 ～ 123.7	20 ～ 100	50 mm ～ 160 mm	-	16 ～ 42	25 mm ～ 40 mm	20 ～ 32	16 ～ 25	10 ～ 16	10 ～ 30	10 ～ 88	50	20	32 ～ 63	16 ～ 40	13.2 ～ 46.4	13.2 ～ 28.2	23.4 ～ 83.4	20 ～ 50	20 ～ 50	14 ～ 63	20 ～ 40	40 ～ 50	16 ～ 40	20 ～ 25	25 ～ 32	20 ～ 32	50 ～ 80	80 ～ 250	80 ～ 200	25 ～ 63	20 ～ 63	40 ～ 63	80 ～ 125	80 ～ 125	80 ～ 200	80 ～ 200	40 ～ 50
work material	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium	Titanium
Finish category	-	-	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Finishing	Rough to Finish Processing	Rough and medium rough processing / Finishing	Rough and medium rough processing / Finishing	Finishing	Rough and medium rough processing / Finishing	Finishing	-	Rough and medium rough processing	Finishing	-	-	-	-	-	-	-	-	-	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing
Overall length (L)(mm)	79 ～ 200	90 ～ 190	-	130 ～ 150	-	-	50 ～ 63	40$40.7 ～ 98.7	-	50 ～ 63	-	-	125 ～ 150	48 ～ 62	200 ～ 250	123 ～ 132	33 ～ 40	40 ～ 250	40	100	150 ～ 200	27 ～ 40	140 ～ 300	35 ～ 40	40 ～ 63	140 ～ 350	140 ～ 350	80 ～ 180	120 ～ 160	-	42 ～ 63	130 ～ 180	130 ～ 200	49 ～ 63	120	-	-	120 ～ 220	100 ～ 125	-	-	-	-	-	170 ～ 250
Number of flutes(sheet)	2 ～ 6	2 ～ 6	-	3 ～ 5	3 ～ 6	8 ～ 24	7 ～ 12	3 ～ 12	2 ～ 10	3 ～ 8	6 ～ 16	2 ～ 4	2 ～ 3	2 ～ 4	2	1	2 ～ 4	2 ～ 10	5	3	3 ～ 4	2 ～ 6	2 ～ 5	2 ～ 4	3 ～ 8	-	-	1 ～ 8	4 ～ 16	10 ～ 16	2 ～ 6	2 ～ 3	2 ～ 3	2 ～ 3	4 ～ 6	4 ～ 12	4 ～ 10	2 ～ 6	2 ～ 6	4 ～ 6	7 ～ 9	4 ～ 6	8 ～ 20	4 ～ 8	2 ～ 3
Mounting Method	With handle	With handle	Arbor	With handle	Arbor	Arbor	Arbor	With handle / Arbor	Centering Plug	Arbor	Arbor	Centering Plug	With handle	Shell Type	With handle	With handle	Centering Plug	With handle / Arbor	Arbor	With handle	With handle	Centering Plug	With handle	Centering Plug	Arbor	With handle	With handle	With handle	With handle	Arbor	Centering Plug	With handle	With handle	Centering Plug	With handle	Arbor	Arbor	With handle	With handle	Arbor	Arbor	Arbor	Arbor	Arbor	With handle
Shank diameter (d)(mm)	16 ～ 32	16 ～ 32	-	20 ～ 25	-	-	25.4 ～ 50.8	20 ～ 25	-	22 ～ 50.8	27 ～ 50	8 ～ 16	25 ～ 32	-	20 ～ 32	12 ～ 16	-	20 ～ 42	-	20	32	-	25 ～ 42	-	-	25 ～ 50.8	25 ～ 50.8	16 ～ 32	20 ～ 42	-	8.5 ～ 17	20 ～ 25	25 ～ 32	10.5 ～ 17	32	-	-	20 ～ 42	20 ～ 32	-	-	-	-	-	32
Underneck length (ℓ1)(mm)	20 ～ 120	25 ～ 90	-	35 ～ 50	-	-	-	25.7 ～ 40.7	23 ～ 70	-	-	25 ～ 45	-	30 ～ 40	27 ～ 40	-	-	50 ～ 120	-	30	45	-	40 ～ 180	-	-	60 ～ 250	60 ～ 250	25 ～ 60	40 ～ 50	-	25 ～ 40	50 ～ 100	50 ～ 120	30 ～ 40	40	-	-	25 ～ 80	40	-	-	-	-	-	50
Maximum Cutting Depth (Ad)(mm)	-	-	10	17～35	4 ～ 6	27 ～ 53	15.4 ～ 15.7	-	5.5 ～ 10	6 ～ 10	-	10	12	-	14.4 ～ 22.3	-	-	-	-	-	-	-	-	-	-	30～69	20～47	10	18～36	18～36	10	4	5	4 ～ 5	5.5	5.5 ～ 7.5	5.5	14	4 ～ 6	14	14	14	6	4 ～ 6	8
Compatible Tip Material	-	Carbide Coat / No Carbide Coat	-	-	-	-	Carbide Coat	Carbide Coat	-	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…