(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
85 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
MISUMI
Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 40 | - | 4 ~ 20 | 4 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 276,083 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 60 | - | 4 ~ 20 | 4 | 45 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 275,458 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A 2-flute end mill with a rigid lubricating film WXL coating. Effective for cutting not only steel but also copper alloys. A 4D flute length type that is recommended for both wet and dry machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 12 | 0.8 ~ 48 | - | 4 ~ 12 | 2 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 483,333 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ By applying a rigid lubricating film WXL coating, it is also effective for a wide range of cutting such as general steel, hardened steel and copper alloys.・ Recommended for both wet and dry processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 30 | 2.5 ~ 45 | - | 4 ~ 32 | 4 | 40 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 428,333 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model
MISUMI
The long-awaited long-neck type joins the popular XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 6 | 0.2 ~ 9 | 0.3 ~ 60 | 4 ~ 6 | 2 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
From: 277,752 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.3 ~ 60 | - | 3 ~ 20 | 2 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 247,516 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
MISUMI
The price of the low-cost classic XAL Series has been further reduced!
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.2 ~ 40 | - | 3 ~ 20 | 2 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 241,051 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE
OSG
[Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 30 | 0.2 ~ 60 | - | 4 ~ 32 | 2 | 45 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: 285,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model
MISUMI
Introducing a long type with 45° spiral in the popular XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 5 ~ 60 | - | 4 ~ 12 | 4 | 45 ~ 105 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 647,254 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ WXL coating with excellent lubricity and abrasion resistance・ Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 12 | 0.15 ~ 18 | 0.3 ~ 60 | 4 ~ 12 | 2 | 45 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
From: 419,999 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 12 | 2 ~ 48 | - | 4 ~ 12 | 2 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 308,613 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE
OSG
[Notice]Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A 2-flute end mill with a rigid lubricating film WXL coating.・ Effective for cutting not only steel but also copper alloys.・ A 1.5D flute length type that is recommended for both wet and dry machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 12 | 0.15 ~ 18 | - | 4 ~ 12 | 2 | 45 ~ 75 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: 275,205 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A general-purpose 4-flute end mill with FX coating that has excellent heat resistance. Supports high speed and high feed machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 30 | 6 ~ 45 | - | 4 ~ 32 | 4 | 40 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: 1,920,376 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium)
KYOCERA
End mill for high hardness materials that has achieved long tool lifespan and stable machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 25 | 5 ~ 53 | - | 6 ~ 25 | 4 ~ 8 | 60 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove | For General Steels (AlCrN, etc.) | With Lead | High Helical |
From: 1,918,212 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
2 ~ 20 | 5 ~ 38 | - | 4 ~ 20 | 4 | 45 ~ 125 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 518,387 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2.5 ~ 50 | - | 4 ~ 20 | 4 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 589,568 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS
OSG
[Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ WXL coating with excellent lubricity and abrasion resistance.・ Can be used with a wide range of work materials and cutting applications. Multiple variations available.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 10 | 1.5 ~ 15 | 4 ~ 80 | 4 ~ 10 | 4 | 45 ~ 150 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Long-Neck Square |
From: 586,666 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Variable split and variable leads have been used to suppress chatter which is likely to occur during high-speed and high-efficiency processing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 7.5 ~ 50 | - | 6 ~ 20 | 4 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 1,369,780 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 20 | 0.4 ~ 38 | - | 3 ~ 20 | 2 | 38 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: 463,077 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid End Mill, 6-Flute HM-6E
KABUSYUUKOUGU
HM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and can process high hardness steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 18 ~ 45 | - | 6 ~ 20 | 6 | 60 ~ 100 | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | Powerful Torsion (45°-60°) | Side / Groove | For General Steels (AlCrN, etc.) | - | Square |
From: 700,575 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 4 ~ 48 | - | 4 ~ 12 | 4 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 490,172 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
MISUMI
Introducing a regular type with 45° spiral in the popular XAL Series
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 4 ~ 48 | - | 4 ~ 12 | 4 | 45 ~ 105 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 516,667 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 2D GSX4C-2D
NACHI(FUJIKOSHI)
[Specifications]· Shape: Square end mill (carbide)· Coating: For General Steels (AlCrN, etc.)· Work Material: General Steel [◎] / Tempered Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Casting [○] / Titanium [◎][Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 40 | - | 4 ~ 20 | 4 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 589,568 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE
OSG
2-flute end mill with hard lubricant film WXL coating applied. It is effective for cutting copper alloys as well as steel. Recommended for both wet and dry work.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.1 ~ 20 | 0.3 ~ 60 | - | 4 ~ 20 | 2 | 45 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 285,000 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model
MISUMI
The new "standard" square end mill with 45° spiral is available at an ultra-low price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 1.5 ~ 26 | - | 4 ~ 12 | 3 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 502,956 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 12 | 2.5 ~ 30 | - | 4 ~ 12 | 2 | 45 ~ 85 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Countersinking | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 249,810 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1.5 ~ 16 | 3.75 ~ 40 | - | 4 ~ 16 | 4 | 45 ~ 105 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 270,663 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model
MISUMI
The price that's only achievable by XAL Series! Introducing the 4-flute long neck
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 6 | 1.5 ~ 9 | 4 ~ 50 | 4 ~ 6 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Long-Neck Square |
From: 417,671 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill 4-Flute / Blade Length 1.5D (Stub) Type
MISUMI
Also effective for high speed machining
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 12 | 4.5 ~ 18 | - | 6 ~ 12 | 4 | 45 ~ 75 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | Standard torsion (30-40°) | Plane / Side / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 265,000 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials. The blade edge is a Gash Land type.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.2 ~ 20 | 0.5 ~ 50 | - | 4 ~ 20 | 2 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 395,209 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Focus on Accuracy / Finished Surface, for Automatic Lathes 2FESW
KYOCERA
[Features]A solid end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes.The MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.The sharp edges can suppress burrs.[Applications]Suitable for automatic lathe finishing of general steel, stainless steel, aluminum, etc.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 13 | 3 ~ 8 | - | 4 ~ 13 | 2 | 35 ~ 45 | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | Standard torsion (30-40°) | Plane / Side / Groove | For General Steels (AlCrN, etc.) | Sharp Edge | Square |
From: 579,929 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Axel Mill, High Feed High Efficiency Type, 4MFK (square type)
KYOCERA
Unique variable distribution and lead allow excellent chatter resistance.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 16 | 4.5 ~ 48 | - | 6 ~ 16 | 4 | 60 ~ 110 | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | Powerful Torsion (45°-60°) | Plane / Side / Groove | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 1,242,087 VND |
---|
Days to Ship: Số ngày giao hàng: 7 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid End Mill, Variable Lead / Double Flute, 4-Flute UM-4E
KABUSYUUKOUGU
UM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and achieves high-efficiency machining by suppressing chattering during machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
4 ~ 20 | 11 ~ 45 | - | 6 ~ 20 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Standard torsion (30-40°) | Side / Groove | For General Steels (AlCrN, etc.) | - | Square |
From: 536,828 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model
MISUMI
Stub flute length items that are ideal for grooving are available at incredibly low prices
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 0.75 ~ 30 | - | 4 ~ 20 | 2 | 40 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | Sharp Edge / With Lead | Square |
From: 226,039 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D
NACHI(FUJIKOSHI)
Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing. Cutting edge has a sharp corner.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2.5 ~ 50 | - | 4 ~ 20 | 2 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 395,209 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 2-Flute Blade 2D GSX2C-2D
NACHI(FUJIKOSHI)
[Specifications]· Shape: Square end mill (carbide)· Coating: For General Steels (AlCrN, etc.)· Work Material: General Steel [◎] / Tempering Steel [◎] / High Hardness Steel to HRC55 [◎] / High Hardness Steel to HRC60 [○] / Stainless Steel [◎] / Titanium [◎]· Blade Shape: With Lead[Applications] Flat surfaces / side surfaces / grooves / inclined cutting
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2 ~ 40 | - | 4 ~ 20 | 2 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Titanium[◎] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 395,209 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 1.5 ~ 30 | - | 4 ~ 20 | 3 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 589,568 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL VL Ti/ SUS 2.5D GSXVL4T-2.5D
NACHI(FUJIKOSHI)
The variable split, variable lead, and sharp cutting edge suppress chatter and make it suitable for heat-resistant alloys.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | 7.5 ~ 50 | - | 6 ~ 20 | 4 | 45 ~ 100 | Stainless Steel[◎] / Titanium[◎] | Powerful Torsion (45°-60°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 1,369,780 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 1.5 ~ 30 | - | 4 ~ 20 | 4 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 589,568 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 2-Flute Blade 3D GSX2C-3D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 3 ~ 60 | - | 4 ~ 20 | 2 | 40 ~ 120 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 395,209 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 2-Flute Blade 4D GSX2C-4D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 4 ~ 80 | - | 4 ~ 20 | 2 | 40 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 657,436 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 3-Flute Blade 2D GSX3C-2D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 2.5 ~ 40 | - | 4 ~ 20 | 3 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 589,568 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL Slot 1.5D GSXSLT-1.5D
NACHI(FUJIKOSHI)
Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 16 | 1.5 ~ 24 | - | 4 ~ 16 | 3 | 40 ~ 90 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 774,091 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL Roughing 2.5D GSXRE-2.5D
NACHI(FUJIKOSHI)
Improved fracture resistance when used at high speeds for high efficiency. The GSX coating further improves heat resistance and abrasion resistance.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
4 ~ 20 | 10 ~ 50 | - | 6 ~ 20 | 4 | 45 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Roughing |
From: 1,909,694 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
GSX MILL 4-Flute Blade 1D GSX4C-1D
NACHI(FUJIKOSHI)
Supports wet processing of raw materials through high-speed dry processing of high hardness materials.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
1 ~ 20 | 1 ~ 20 | - | 4 ~ 20 | 4 | 40 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | For General Steels (AlCrN, etc.) | With Lead | Square |
From: 589,568 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
SpecificationsĐặc điểm kĩ thuật |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | MISUMI | MISUMI | OSG | OSG | MISUMI | MISUMI | MISUMI | OSG | MISUMI | OSG | MISUMI | OSG | OSG | KYOCERA | MISUMI | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | KABUSYUUKOUGU | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | KYOCERA | KYOCERA | KABUSYUUKOUGU | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
Product SeriesDòng sản phẩm | XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model | XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (4D Type)_WXL-4D-DE | Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS | XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (2D Type)_WXL-2D-DE | XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS | XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (1.5D Type)_WXL-1.5D-DE | ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short_FX-MG-EMS | For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium) | XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model | Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS | XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | Micro Grain Carbide End Mills WXL Coated 2 Flutes (3D Type)_WXL-3D-DE | XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model | XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model | XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model | XAL Series Carbide Square End Mill 4-Flute / Blade Length 1.5D (Stub) Type | Focus on Accuracy / Finished Surface, for Automatic Lathes 2FESW | Axel Mill, High Feed High Efficiency Type, 4MFK (square type) | Carbide Solid End Mill, Variable Lead / Double Flute, 4-Flute UM-4E | XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model | ||||||||||||||||||
From | 276,083 VND Special Price On Sale Till 31/03/2025 | 275,458 VND | 483,333 VND Special Price On Sale Till 31/03/2025 | 428,333 VND Special Price On Sale Till 31/03/2025 | 277,752 VND | 247,516 VND | 241,051 VND Special Price On Sale Till 31/03/2025 | 285,000 VND | 647,254 VND | 419,999 VND | 308,613 VND | 275,205 VND | 1,920,376 VND | 1,918,212 VND | 518,387 VND Special Price On Sale Till 31/03/2025 | 589,568 VND | 586,666 VND | 1,369,780 VND | 463,077 VND | 700,575 VND | 490,172 VND | 516,667 VND | 589,568 VND | 285,000 VND | 502,956 VND | 249,810 VND | 270,663 VND | 417,671 VND | 265,000 VND | 395,209 VND | 579,929 VND | 1,242,087 VND | 536,828 VND | 226,039 VND | 395,209 VND | 395,209 VND | 589,568 VND | 1,369,780 VND | 589,568 VND | 395,209 VND | 657,436 VND | 589,568 VND | 774,091 VND | 1,909,694 VND | 589,568 VND |
Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | Same day or more | Same day or more | 6 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 7 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more |
SpecificationsĐặc điểm kĩ thuật | |||||||||||||||||||||||||||||||||||||||||||||
Blade diameter (D)(φ) | 1 ~ 20 | 1 ~ 20 | 0.2 ~ 12 | 1 ~ 30 | 0.1 ~ 6 | 0.1 ~ 20 | 0.1 ~ 20 | 0.1 ~ 30 | 1 ~ 12 | 0.1 ~ 12 | 0.5 ~ 12 | 0.1 ~ 12 | 2 ~ 30 | 1 ~ 25 | 2 ~ 20 | 1 ~ 20 | 1 ~ 10 | 3 ~ 20 | 0.2 ~ 20 | 6 ~ 20 | 1 ~ 12 | 1 ~ 12 | 1 ~ 20 | 0.1 ~ 20 | 1 ~ 12 | 1 ~ 12 | 1.5 ~ 16 | 1 ~ 6 | 3 ~ 12 | 0.2 ~ 20 | 3 ~ 13 | 3 ~ 16 | 4 ~ 20 | 0.5 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 3 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 20 | 1 ~ 16 | 4 ~ 20 | 1 ~ 20 |
Blade length (ℓ)(mm) | 2 ~ 40 | 3 ~ 60 | 0.8 ~ 48 | 2.5 ~ 45 | 0.2 ~ 9 | 0.3 ~ 60 | 0.2 ~ 40 | 0.2 ~ 60 | 5 ~ 60 | 0.15 ~ 18 | 2 ~ 48 | 0.15 ~ 18 | 6 ~ 45 | 5 ~ 53 | 5 ~ 38 | 2.5 ~ 50 | 1.5 ~ 15 | 7.5 ~ 50 | 0.4 ~ 38 | 18 ~ 45 | 4 ~ 48 | 4 ~ 48 | 2 ~ 40 | 0.3 ~ 60 | 1.5 ~ 26 | 2.5 ~ 30 | 3.75 ~ 40 | 1.5 ~ 9 | 4.5 ~ 18 | 0.5 ~ 50 | 3 ~ 8 | 4.5 ~ 48 | 11 ~ 45 | 0.75 ~ 30 | 2.5 ~ 50 | 2 ~ 40 | 1.5 ~ 30 | 7.5 ~ 50 | 1.5 ~ 30 | 3 ~ 60 | 4 ~ 80 | 2.5 ~ 40 | 1.5 ~ 24 | 10 ~ 50 | 1 ~ 20 |
Underneck length (ℓ1)(mm) | - | - | - | - | 0.3 ~ 60 | - | - | - | - | 0.3 ~ 60 | - | - | - | - | - | - | 4 ~ 80 | - | - | - | - | - | - | - | - | - | - | 4 ~ 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Shank diameter (d)(mm) | 4 ~ 20 | 4 ~ 20 | 4 ~ 12 | 4 ~ 32 | 4 ~ 6 | 3 ~ 20 | 3 ~ 20 | 4 ~ 32 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 32 | 6 ~ 25 | 4 ~ 20 | 4 ~ 20 | 4 ~ 10 | 6 ~ 20 | 3 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 4 ~ 6 | 6 ~ 12 | 4 ~ 20 | 4 ~ 13 | 6 ~ 16 | 6 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 6 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 20 | 4 ~ 16 | 6 ~ 20 | 4 ~ 20 |
Number of flutes(sheet) | 4 | 4 | 2 | 4 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 4 | 4 ~ 8 | 4 | 4 | 4 | 4 | 2 | 6 | 4 | 4 | 4 | 2 | 3 | 2 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 3 | 4 | 4 | 2 | 2 | 3 | 3 | 4 | 4 |
Overall Length (L)(mm) | 40 ~ 110 | 45 ~ 130 | 45 ~ 100 | 40 ~ 125 | 50 ~ 100 | 40 ~ 110 | 40 ~ 110 | 45 ~ 140 | 45 ~ 105 | 45 ~ 140 | 45 ~ 100 | 45 ~ 75 | 40 ~ 125 | 60 ~ 125 | 45 ~ 125 | 40 ~ 100 | 45 ~ 150 | 45 ~ 100 | 38 ~ 100 | 60 ~ 100 | 45 ~ 100 | 45 ~ 105 | 40 ~ 100 | 45 ~ 130 | 45 ~ 100 | 45 ~ 85 | 45 ~ 105 | 50 ~ 100 | 45 ~ 75 | 40 ~ 100 | 35 ~ 45 | 60 ~ 110 | 50 ~ 100 | 40 ~ 110 | 40 ~ 100 | 40 ~ 100 | 40 ~ 100 | 45 ~ 100 | 40 ~ 100 | 40 ~ 120 | 40 ~ 140 | 40 ~ 100 | 40 ~ 90 | 45 ~ 100 | 40 ~ 100 |
work material | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] |
Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
Coating | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) |
Blade tip shape | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge | Sharp Edge | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge | - | Sharp Edge / With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | Sharp Edge | With Lead | - | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead |
Type | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | High Helical | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Square |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy