Base Unit (MB-VM300)
:
IMAO
[Features]
Vacuum clamp base unit that does not require vacuum pump.
[Applications]
Please use in combination with vacuum plate or sub-plate.
Product features and specifications
Basic specifications and features of the product
■ Specifications
| Base Plate | Pin | Bolt |
|---|---|---|
| A5083 Blue | Steel Hardening and tempering Polishing finish | Steel Hardening and tempering |
- Weight: 7.8 kg
- Please use it in combination with a vacuum plate or sub-plate.
■ Accessories
| Mount clamp | 4 pcs. |
|---|---|
| Rubber cord | 3 m |
| Tube outer diameter of ø6 mm | 3.6 m |
| Quick-connect fitting R1/4 | 1 pc. |
| Inline Filter | 1 pc. |
| Base plate positioning locating pin | 2 pcs. |
| Locating pin mounting bolt M8 × 1.25-16L | 2 pcs. |
| Base plate mounting washer | 4 pcs. |
| Spare O-ring | Small rings × 2 pcs. and large ring × 1 pcs. |
■Safety indicator function
You can check if the workpiece is clamped with the safety indicator.
When the supply valve is turned on, the safety indicator retracts to notify the completion of the clamp.
Air pressure is 0.5 MPa to 0.7 MPa and continuous supply is required. (Air consumption of 57 L/min)
When the supply valve is turned on, the safety indicator retracts to notify the completion of the clamp.
Air pressure is 0.5 MPa to 0.7 MPa and continuous supply is required. (Air consumption of 57 L/min)
Drawing
Usage method and usage examples
Usage method
■Fixing with mount clamp
For the fixing method without using the mount clamp and the positioning method, refer to the instruction manual attached to the product.
■Air connection method
