Bore Gages SERIES 511 — ABSOLUTE Digimatic Bore Gages

• These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement.
• Up to four extension rods (250mm or 500mm) can be used for measuring at the bottom
of a hole 2m deep.
• ABS (ABSOLUTE) type bore gages are not subject to overspeed error.
• The display and grip can be rotated up to 320 degrees and the display can be inclined up to
90 degrees, so that it is easily readable from any direction.
• The minimum value holding function provides easy measurement of hole diameter.
• Setting the Bore Gage to a master value using a gauge block set allows quick and accurate setting.
• A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting a gage
before making a measurement.