Wireless Vernier Caliper E-FW

It helps shorten the quality control and measurement time.
Just press a button to transmit measurement data.
The measured value is sent simply by pressing a button after measurement is complete.
As a transceiver is embedded in the caliper body, no cable is needed.
The standardly equipped software can generate, from the measurement data, the average value, standard deviation, and pass/fail judgments.
The receiver is a USB type which can be connected to a computer with a single touch. (1 caliper unit is included)

[USB Receiver]
· Model: USB-K1
· Frequency band: 2.4 GHz low power radio
· Power Source: Supplied from USB Terminal
· Reception confirmation: LED lights up when receiving
· Operating temperature range: 0°C – +40°C
· Operating humidity range: 70% and below relative humidity
· Mass: 10 g
· Dimensions: 27 X 50.6 X 13 mm