Neji-Saurus M2 PZ-57
:
ENGINEER
A "NEJI-SAURUS" series tool with a vertical groove engraved on the tip to remove crushed screws.
[Features]
・ Ideal for work in narrow spaces with a slim tip
・ It adopts environment-friendly elastomer resin material and fits perfectly in the hand
・ Ideal for removing extremely small crushed screws, special screws, etc.
・ Ideal for micro screws of M2 or less such as PCB and electronic devices
・ Pocket-sized 120 mm, lightweight design weighing only 100 g
・ ESD compatible grip. Surface resistor value of approx. 1 × 10 to the power of 6 to 10 to the power of 7 Ω/sq can be used with confidence even during work on the circuit board (Not an insulated tool)
・ With a strap hole that is ideal for preventing falling
Features
●Securely holds the screw with vertical and horizontal grooves at the tip.（PAT.）●ESD compatible grip.
●Surface resistivity of the grip approximately 1 x 106 to 107 Ω/sq.
Specification
●Total Length(mm):120●Grip Width(mm):52
●Tip Width(mm):12
●Thickness(mm):8
●Tip Length(mm):20.5
●SPQ(piece):5
●Compatible Screw/Holding Part at the Tip: Φ2 to Φ3.5, Main Body Holding Part: Φ3.5 to Φ5.5