Rolled Auto-slide Knurled Holder (For Crossed Lines) KHS
:
SUPER TOOL
[Features]
・ For Japanese standard diamond knurling wheel
・ With the original position setting mechanism of the knurling wheel holding part
・ Since the original position is clearly visible, it can be easily installed on automatic lathes and NC lathes
・ The misalignment can be automatically adjusted by the automatic sliding mechanism
・ The centering range is within ±2.5 mm to the center position
・ The "auto sliding knurling holder" moves the knurling wheel holding part up and down to eliminate the difference in rolling force generated between the 2 knurling wheels, enabling knurling processing with a uniform groove depth
・ This is a holder for rolling type knurling diamond pattern wheel.
[Applications]
・ Compatible models: KNS
Features
● For domestic standard knurl piece diamond knurling.● With the initial position setting mechanism of the knurling holding part.
● Automatic alignment by upper and lower auto slide mechanism （±2.5mm from initial position） eliminates the rolling force generated in 2 knurling pieces, and enables knurling processing with uniform groove depths.
● A holder for rolling diamond knurling
Specification
●W x H x Total Length(mm):20 x 20 x 147●Compatible Knurl Piece:KNSRL14 to 50
●Machining Diameter(mm):10 to 250
●SPQ(piece):1
● Compatible Model: Lathe