Riveter & Nutter HR30N
:
SK 11
- Cannot be used with 4.8 mm stainless steel rivets.
- If the shaft is not cut, grasp the handle again. After caulking, open the handle up widely and take out the shaft. Lubricate the joint part of the handle from time to time. Remove and clean the jaw from time to time. (Riveter only).
- Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.
A crimping tool that allows you to crimp and tighten a nut with this single unit.
[Features]
・ When joining steel plates, etc., even if the base material is sealed on one side, you can drill holes in the base material and members to be joined in advance, set the blind rivet on the hand riveter to crimp and join
・ Blind rivets and nut rivets can be used by changing the nose piece
・ With nut rivets, you can carry out screw mount on sealed objects that cannot be touched or thin steel plates, etc., that cannot be screwed
・ Ideal for riveting and nut mounting on frames, gates, fences, window grids, cars, etc.
[Application]
・ Fastening members and base materials, creating nut holes (screw holes) for thin plates, etc.