Magnet for Air Jet

TRUSCO NAKAYAMA

Magnet stand for air jet for refueling cutting fluid that is easy to set.
[Features]
・ 320 N super strong, small on/off magnet.
・ The bottom surface is V-shaped (150°) and can be attached not only to flat surfaces but also to cylindrical surfaces.
・ Equipped with 3 screw holes Rc1/4. Can also be used such as for refueling cutting fluid.
・ Holding force is S20C, plate thickness 200 mm, value of ground-finish surface.
[Application]
・ Manifold with strong small magnet, for 1/4 inch nozzle.

Features

●It is a cooling method that does not use cutting fluid unit.
●Cooling air is 31°C lower than the outside air.
●320N Super strong on/off small type magnet.

Usage

●To cool the blade edge and cool the workpiece during cutting.

Specification

●Adhesion Strength（N）:320
●Connection Port Diameter:Rc1/4
●SPQ（piece）:20
●Adaption fluid: air

Accessories

●Hose Nipple

Warning

●If it is not clean air, clogging may occur and the cooling capacity may fall.
●Joints and nipples are not included.
●Nozzle and connection bracket are sold separately.