"Air Jet" (1 Nozzle Set)
:
TRUSCO NAKAYAMA
[Features]
・ A cooling method that does not use cutting fluid.
・ Cooling air is up to 35°C lower than the outside air.
・ Since no machine is used, there are no failures and maintenance is easy.
・ A cooling device for dry machining that applies the "vortex theory."
[Application]
・ For cooling the cutting edge and cooling the work piece during cutting.
[Set Contents]
・ AJ-N1 (nozzle), AJ-C (cooling device body), AJ-S (silencer), AJ-MG (Magnet stand)
Features
●It is a cooling method that does not use cutting fluid unit.●Cooling air is 31°C lower than the outside air.
●Since it does not use a machine, there is no failure, maintenance is easy.
●Cooling device for dry processing applying [Vortex theory].
Usage
●To cool the blade edge and cool the workpiece during cutting.Specification
●Air Consumption（L/min）:230 to 490●Working Air Pressure（MPa）:0.2 to 0.5
●Discharge Port:1/8
●Compressed Air Supply Port:R1/4
●SPQ（set）:10
●Adaption fluid: air