Mirac Hanger (Thin Type)

[Features]
・ It is a thin type with a height of 15 mm, so the finish is neat. A short support member that can be used for various purposes such as fixing VE pipes, steel pipes, PF pipes, etc.
・ By combining with abundant accessories, various parts can be attached to various places
・ It has been cut to a length of 100 mm to 500 mm, which is frequently used, so it is easy to use and does not require any effort
・ It has an octagonal hole in the center, and a commercially available fixture for ø14 round hole can be attached
・ Since the top surface is flat, it is hard to deform even if the pipe is fixed
・ The inner surface is knurled and does not slip even if a duct clip, etc., is attached
・ It is a metal fitting used when attaching a single saddle clamp, wall enclosure, etc., to the opening of the Mirac Hanger
・ The nut can be installed easily on the opening surface