Terminal Block Conversion Unit CS1W-AT

- Terminal Block Conversion Unit, CS1W-AT series from OMRON.
- The terminal block wiring of the existing C500 series PLC can be used as is.
- This reduces rewiring work and post-rewiring check man-hours. (Some wiring changes are required for the power supply and common terminals.)
- Use a connection cable for wiring from this unit to the basic I/O unit of the CS/CJ series.
- This allows I/O wiring for the CS/CJ series with reduced wiring man-hours.
- The size of the terminal block conversion unit is the same as the original large C series basic I/O unit, so the terminal block (or connector) can be attached.