MELSEC-F Input/Output Expansion Block
:
MITSUBISHI
An input/output expansion block that can receive power supply from a basic power supply unit.
[Features]
· Can expand input by 16 points.
· Can be connected to the back of a basic unit or expansion unit.
[Applications]
· Convenient for expanding input/output, receiving power supply from a basic unit or expansion unit.
Variation
FX2N-16EX
FX2N-16EX-C
FX2N-16EYR
FX2N-16EYT
FX2N-16EYT-C
FX2N-8EX
FX2N-8EYR
FX2NC-16EX-T
General Specifications
Common
| Ambient Temperature | 0 To 55°C - When operating -25 To 75°C - When saving | ||
|---|---|---|---|
| Relative Humidity | 5 To 95% RH (No Condensation) - When Operating | ||
| Vibration-resistant | When Mounting To DIN Rail | Frequency: 10 To 57 Hz | Single Amplitude: 0.035 mm 10 Times In Each Direction X, Y, Z (Total 80 Minutes Each) Assessment Standards Are Based On IEC61131-2 |
| Frequency: 57 To 150 Hz | Acceleration: 4.9 m/s2 10 Times In Each Direction X, Y, Z (Total 80 Minutes Each) Assessment Standards Are Based On IEC61131-2 | ||
| When Mounting Directly | Frequency: 10 To 57 Hz | Single Amplitude: 0.075 mm 10 Times In Each Direction X, Y, Z (Total 80 Minutes Each) Assessment Standards Are Based On IEC61131-2 | |
| Frequency: 57 To 150 Hz | Acceleration: 9.8 m/s2 10 Times In Each Direction X, Y, Z (Total 80 Minutes Each) Assessment Standards Are Based On IEC61131-2 | ||
| Shock-Resistant | 147 m/s2, For A Half-sine Pulse Three Times In Directions X, Y, And Z For A Duration Of 11 ms. The Assessment Standards Are Based On IEC611131-2 | ||
| Noise Resistant | Achieved Through A Noise Simulator With A Noise Voltage Of 1,000 Vp-p, Noise Width Of 1 μs, Rise Time Of 1 ns, And Frequency Of 30 To 100 Hz | ||
| Voltage Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 1 Minute At 500 V AC | ||
| Insulation Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 5 MΩ Or More At 500 V DC On An Insulation Resistance Meter | ||
| Circumstances Of Use | When There Is Not A Large Amount Of Conductive Dust, And No Corrosion Or Flammable Gas | ||
| Frequency Of Use | Cannot Be Used In Pressurized Environments Below 2,000 m. Doing So May Cause Failures. | ||
FX2N-16EX
| Voltage Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 1 Minute At 500 V AC |
|---|---|
| Insulation Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 5 MΩ Or More At 500 V DC On An Insulation Resistance Meter |
FX2N-16EX-C
| Voltage Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 1 Minute At 500 V AC |
|---|---|
| Insulation Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 5 MΩ Or More At 500 V DC On An Insulation Resistance Meter |
FX2N-16EYR
| Voltage Resistance | Between The Expansion Output Block Output Terminal And Earth Terminal: 1 Minute At 1,500 V AC |
|---|---|
| Insulation Resistance | Between The Expansion Output Block Output Terminal (Relay) And Earth Terminal: 5 MΩOr More At 500 V DC On An Insulation Resistance Meter |
FX2N-16EYT
| Voltage Resistance | Between The Expansion Output Block Output Terminal (Transistor) And Earth Terminal: 1 Minute At 500 V AC |
|---|---|
| Insulation Resistance | Between The Expansion Output Block Output Terminal (Transistor) And Earth Terminal: 5 MΩ Or More At 500 V DC On An Insulation Resistance Meter |
FX2N-16EYT-C
| Voltage Resistance | Between The Expansion Output Block Output Terminal (Transistor) And Earth Terminal: 1 Minute At 500 V AC |
|---|---|
| Insulation Resistance | Between The Expansion Output Block Output Terminal (Transistor) And Earth Terminal: 5 MΩ Or More At 500 V DC On An Insulation Resistance Meter |
FX2N-8EX
| Voltage Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 1 Minute At 500 V AC |
|---|---|
| Insulation Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 5 MΩ Or More At 500 V DC On An Insulation Resistance Meter |
FX2N-8EYR
| Voltage Resistance | Between The Expansion Output Block Output Terminal And Earth Terminal: 1 Minute At 1,500 V AC |
|---|---|
| Insulation Resistance | Between The Expansion Output Block Output Terminal (Relay) And Earth Terminal: 5 MΩOr More At 500 V DC On An Insulation Resistance Meter |
FX2NC-16EX-T
| Ambient Temperature | 0 To 55°C - When Operating -20 To 70°C - When Saving | ||
|---|---|---|---|
| Relative Humidity | 35 To 85% RH (No Condensation) - When Operating | ||
| Vibration-resistant | When Mounting To DIN Rail | Frequency: 10 To 57 Hz | Single Amplitude: 0.035 mm 10 Times In Each Direction X, Y, Z (Total 80 Minutes Each) Assessment Standards Are Based On IEC61131-2 |
| Frequency: 57 To 150 Hz | Acceleration: 4.9 m/s2 10 Times In Each Direction X, Y, Z (Total 80 Minutes Each) Assessment Standards Are Based On IEC61131-2 | ||
| Shock-Resistant | 147 m/s2, For A Half-sine Pulse Three Times In Directions X, Y, And Z For A Duration Of 11 ms. The Assessment Standards Are Based On IEC611131-2 | ||
| Noise Resistant | Achieved Through A Noise Simulator With A Noise Voltage Of 1,000 Vp-p, Noise Width Of 1 μs, Rise Time Of 1 ns, And Frequency Of 30 To 100 Hz | ||
| Voltage Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 1 Minute At 500 V AC | ||
| Insulation Resistance | Between The Expansion Input Block Input Terminal And Earth Terminal: 5 MΩ Or More At 500 V DC On An Insulation Resistance Meter | ||