Air Combination, Filter Regulator + Mist Separator, ACG20D, ACG30D, ACG40D
- ■ SMC Air Cylinder Product Selection and Technical Information
The featured products page can be found here.
■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
Click here for a quotation or to make an order if you have a model number. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
FRL unit that does not require panel cut for pressure gauge.
[Features]
· Improved visibility of the pressure gauge at various mounting locations.
· Single-action installation and removal of the pressure gauge cover.·
· The mounting angle of the pressure gauge can be selected according to the piping direction.
Pressure gauge anti-revolving mechanism.
Panel-cut for pressure gauge not necessary.
Air Combination, Filter Regulator + Mist Separator, ACG20D, ACG30D, ACG40D Specifications
ACG40D external appearance
JIS symbol
Standard Specifications
| Model | ACG20D | ACG30D | ACG40D | |
|---|---|---|---|---|
| Components | Filter Regulator | AWG20 | AWG30 | AWG40 |
| Mist Separator | AFM20 | AFM30 | AFM40 | |
| Connection port size | 1/8 1/4 | 1/4 3/8 | 1/4 3/8 1/2 | |
| Fluid | Air | |||
| Proof pressure | 1.5 MPa | |||
| Maximum operating pressure | 1.0 MPa | |||
| Set Pressure Range | 0.05 to 0.85 MPa | |||
| Rated Flow (L/min [ANR])*1 | 150 | 330 | 800 | |
| Relief pressure | Set pressure: +0.05 MPa (at relief flow rate of 0.1 L/min [ANR]) | |||
| Ambient and fluid temperature | -5 to +60°C (no freezing) | |||
| Filtration | AWG: 5 μm, AFM: 0.3 μm (collection efficiency 99.9%) | |||
| Oil Mist Density in the Outlet Side | Max 1.0 mg/m3(ANR) (≈ 0.8 ppm)*2*3 | |||
| Construction: Filter Regulator | Relieving type | |||
| Bowl material | Polycarbonate | |||
| Bowl guard | Semi-standard | Standard Equipment | ||
| Weight (kg) | 0.43 | 0.85 | 1.52 | |
*1: Conditions: Mist separator inlet pressure is 0.5 MPa. The rated flow varies according to the inlet pressure. Keep the air flow within the rated flow to prevent an outflow of oil to the outlet side.
Note 2) At compressor discharge concentration 30 mg/m3 (ANR)
*3: The bowl O-ring and other O-rings use a small amount of grease.
Dimensions
ACG20D dimensional drawing
ACG30D, ACG40D dimensional drawing
(Unit: mm)
| Model | Connection port size | Standard specification | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | N | P | Bracket mounting dimensions | ||||||||||
| E | G | H1 | H2 | J | K | L | øL | M | ||||||||
| ACG20D | 1/8, 1/4 | 83 | 87 | 91 | 60 | 2.5 | 26 | 41.5 | 30 | 24 | 24 | 33 | 12 | 5.5 | 5.5 | 3.2 |
| ACG30D | 1/4, 3/8 | 110 | 115 | 108.5 | 80 | 2.5 | 30 | 55 | 41 | 35 | 35 | - | 14 | |||