MiSUMi
Giỏ hàng
Hỗ trợ
Báo giá / Đặt hàng
Mã QR ứng dụng MISUMI Nhấp để biết thêm chi tiết

Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67]

:
OMRON

    Groove Type Connector / Pre-Wired Type Photomicrosensor
    Photomicrosensors is a type of optical sensor that detect the presence or absence of an object. They offer a wide variety of shape to choose from.
    [Application]
    Photomicrosensors are a versatile type of sensor that can be used to measure speed, count objects, and more.

    Drawing

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 1

    EE-SX670/670P
    EE-SX670A/670R
    EE-SX470

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 2

    EE-SX671/671P
    EE-SX671A/671R
    EE-SX471

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 3

    EE-SX672/672P
    EE-SX672A/672R

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 4

    EE-SX673/673P
    EE-SX673A/673R
    EE-SX473

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 5

    EE-SX674/674P
    EE-SX674A/674R
    EE-SX474

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 6

    EE-SX675/675P

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 7

    EE-SX676/676P

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 8

    EE-SX677/677P

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 9

    EE-SX670-WR/670P-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 10

    EE-SX671-WR/671P-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 11

    EE-SX672-WR/672P-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 12

    EE-SX673-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 13

    EE-SX674-WR/674P-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 14

    EE-SX675-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 15

    EE-SX676-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 16

    EE-SX677-WR

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 17

    EE-SX970-C1

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 18

    EE-SX971-C1

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 19

    EE-SX972P-C1

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 20

    EE-SX974P-C1

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 21

    EE-SX975-C1
    EE-SX975P-C1

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 22

    EE-SX976-C1
    EE-SX976P-C1

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], drawing 22

    EE-SX977-C1

    Product Specification

    Low profile connector/pre-wired type (Direct Current light)*1
    EE-SX47/67

    50 to 100 mA direct switching, global standard groove type

    • There is a type that switches the operating mode between Dark-ON and Light-ON.
    • High-speed response with a response frequency of 1 kHz
    • Easy operation check with bright light indicator for light entrance
    • Wide range of power supply voltage from 5 to 24 V DC
    • A type in which the light indicator lights up when the light is blocked is available.
    • Available in 8 shapes for a wide range of variations
    • Robot cord with excellent flexibility is adopted as standard *2

    * 1. The pre-wired type is model EE-SX67 series only.
    *2. Pre-wired type only

    Connector type

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 1
    • *3. Open the (L) terminal of the connector, then it becomes Dark-ON when the light is blocked, and short-circuit the (L) and (+) terminals, then it becomes Light-ON when the light enters. Do not short the L terminal to 0 V, setting to Dark-ON when the light is blocked. It is convenient to use the connector type EE-1001-1, setting to Light-ON when the light enters. The (L) and (+) terminals of this connector are already short-circuited.
    • * 4. When using the EE-1006 and EE-1010 series connectors with cords, if the (L) terminal ((2) pink) wire is not used, it may be affected by noise. Therefore, cut the unused (L) terminal wire from the base of the connector and wrap it with insulation tape, etc., so that it does not come in contact with other terminals.

    Pre-Wired Type

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 2
    • *1. Open the (L) terminal, then the light turns on in Dark-ON mode, and short-circuit the (L) and (+) terminals, then the light turns on in Light-ON mode. Do not short the L terminal to 0 V, setting to Dark-ON when the light is blocked.
    • * 2. When using the EE-1006 and EE-1010 series connectors with cords, if the (L) terminal ((2) pink) wire is not used, it may be affected by noise. Therefore, cut the unused (L) terminal wire from the base of the connector and wrap it with insulation tape, etc., so that it does not come in contact with other terminals.

    Rating / Performance

    ItemsTypeStandard typeL-shapedT-groove center 7 mmClose contact mounting typeT-groove center 10 mmF-shapedR-shaped
    NPNConnector typeEE-SX670
    EE-SX670A
    EE-SX470    		EE-SX671
    EE-SX671A
    EE-SX471    		EE-SX672
    EE-SX672A    		EE-SX673
    EE-SX673A
    EE-SX473    		EE-SX674
    EE-SX674A
    EE-SX474    		EE-SX675EE-SX676EE-SX677
    Pre-Wired TypeEE-SX670-WREE-SX671-WREE-SX672-WREE-SX673-WREE-SX674-WREE-SX675-WREE-SX676-WREE-SX677-WR
    PNPConnector typeEE-SX670P
    EE-SX670R    		EE-SX671P
    EE-SX671R    		EE-SX672P
    EE-SX672R    		EE-SX673P
    EE-SX673R    		EE-SX674P
    EE-SX674R    		EE-SX675PEE-SX676PEE-SX677P
    Pre-Wired TypeEE-SX670P-WREE-SX671P-WREE-SX672P-WR-EE-SX674P-WR---
    Sensing Distance5 mm (groove width)
    Standard detected objectOpaque object: 2 x 0.8 mm or more
    Hysteresis0.025 mm or less
    Light source (peak emission wavelength)Infrared emitting diode (940 nm)
    Indicator light *1Lights when light enters (red) (A and R types light when light is blocked)
    Power supply voltage5 to 24 V DC +/- 10%, ripple (p-p) 10% or less
    Current Consumption12 mA or less (connector type, when L terminal opens), 35 mA or less (NPN pre-wired type), 30 mA or less (PNP pre-wired type)
    Control outputNPN type: NPN open collector, output 5 to 24 V DC 100 mA or less
    Residual voltage 0.8 V or less (at load current of 100 mA), residual voltage 0.4 V or less (at load current of 40 mA), OFF current (leakage current) 0.5 mA or less
    PNP type: PNP open collector, output 5 to 24 V DC 50 mA or less
    Residual voltage 1.3 V or less (at load current of 50 mA), OFF current (leakage current) 0.5 mA or less
    Protection circuitLoad short-circuit protection (connector type), N/A (pre-wired type)
    Response frequency *21 kHz or more (Average value is 3 kHz)
    Operating ambient illuminanceLight-receiving surface illuminance, fluorescent lamp: 1,000 lx or less
    Ambient temperature rangeDuring operation: -25 to +55℃, when stored: -30 to +80℃ (no freezing or condensation)
    Ambient humidity rangeDuring operation: 5 to 85% RH, when stored: 5 to 95%RH (no freezing or condensation)
    Vibration (endurance)20 to 2,000 Hz (peak acceleration 100 m/s2), 1.5 mm double amplitude, 2 hr in each direction of X, Y, and Z (4 min cycle)
    Shock (endurance)500 m/s2, 3 times in each direction of X, Y, and Z
    Protective StructureIP50, IEC60529 standard
    Connection methodConnector type (directly solderable), pre-wired type (standard cord length 1 m), inline connector type (standard cord length 0.1 m)
    Weight (packed state)Connector typeApproximately 3.1 gapproximately 3 gApproximately 2.4 gApproximately 2.3 gapproximately 3 gApproximately 2.7 gApproximately 2.2 gApproximately 2.2 g
    Pre-Wired TypeApproximately 18.9 gApproximately 17.3 gApproximately 17.8 gApproximately 16.8 gApproximately 17.1 gApproximately 18.3 gApproximately 16.9 gApproximately 16.9 g
    MaterialCasePolybutylene terephthalate (PBT)
    Cover emitter/receiverpolycarbonate
    * 1. GaP red LED (peak emission wavelength 690 nm)
    * 2. The measured response frequency indicates the value when the disk shown in the right figure is rotated.
    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 3

    Low profile connector type (Direct Current Light)
    EE-SX97

    Built-in connector for compact size and easy connection, and built-in protection circuit for peace of mind

    • Built-in connector minimizes the external shape and occupied dimensions
    • Equipped with 2 outputs, Light-ON / Dark-ON
    • Built-in reverse connection protection circuit for peace of mind
    • Output overcurrent protection by thermal shutdown circuit *1
    • The indicator light can be checked from multiple directions, and accommodate any installation location.
    • Has a connector with a lock that can also be used with commercially available connectors *2

    *1. Output overcurrent protection is only for NPN type OUT2
    *2. Recommended connection connector
    Made by J.S.T. MFG. CO., LTD., contact: SPHD-001T-P0.5, housing: PAP-04V-S

    Features

    Built-in connector type for miniaturization and easy connection

    With the built-in connector, the external shape and occupied dimensions are greatly reduced. Furthermore, the use of commercially available general-purpose connectors reduces wiring costs.

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 4

    Previous product / EE-SX97 series

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 5

    Uses a commercially available general-purpose connector for easy connection, and comes with a positive lock for removal prevention.

    Peace of mind with built-in reverse connection protection circuit
    Built-in reverse connection protection function protects against reverse power supply connection and reverse output connection. Customers at assembly sites can use it with confidence.
    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 6

    NPN type example

    Easy-to-see indicator light
    The indicator light can be checked from multiple directions (up to 4 directions), and accommodate any installation location.

     

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 7
    Built-in thermal shutdown circuit
    The NPN output type OUT2 control output has an output overcurrent protection function with a thermal shutdown circuit.
    Equipped with 2 outputs: Light-ON / Dark-ON
    All models are equipped with 2 outputs, Light-ON / Dark-ON, so output can be switched simply by wiring according to usage conditions.

    Main body

    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 8

    Rating / Performance

    ItemsTypeStandard typeL-shapedT-groove center 7 mmClose contact mounting typeT-groove center 10 mmF-shapedR-shaped
    NPNEE-SX970-C1EE-SX971-C1--EE-SX975-C1EE-SX976-C1EE-SX977-C1
    PNP--EE-SX972P-C1EE-SX974P-C1EE-SX975P-C1EE-SX976P-C1-
    Sensing Distance5 mm (groove width)
    Standard detected objectOpaque object: 2 x 0.8 mm or more
    Hysteresis0.025 mm or less *1
    Light source (peak emission wavelength)Infrared emitting diode (940 nm)
    Indicator lightLights up when light is received (orange LED)
    Power supply voltage5 to 24 V DC +/- 10%, ripple (p-p) 10% or less
    Current Consumption21 mA or less
    Control outputLoad power supply voltage: DC5 to 24 V
    Load current: 50 mA or less
    Off current: 0.5 mA or less
    Residual voltage: 1.0 V or less (at load current of 50 mA)
    0.4 V or less (at load current of 5 mA)
    Protection circuitReverse power supply connection protection, reverse output connection protection, output overcurrent protection (Only NPN type OUT2 works)
    Response frequency1 kHz or more (average value is 3 kHz)*2
    Operating ambient illuminanceLight-receiving surface illuminance, fluorescent lamp: 1,000 lx or less
    Ambient temperature rangeDuring operation: -25 to +55℃, when stored: -30 to +80℃ (no freezing or condensation)
    Ambient humidity rangeDuring operation: 5 to 85% RH, when stored: 5 to 95%RH (no freezing or condensation)
    Vibration (endurance)10 to 2,000 Hz, 0.75 mm single amplitude, each direction of X, Y, and Z, sweep time: 15 min, sweep count: 10 times
    Shock (endurance)500 m/s2, 3 times in each direction of X, Y, and Z
    Protective StructureIEC60529 standard, IP50
    Connection methodConnector type
    Weight (packed state)approximately 3 g
    MaterialCase/coverPolybutylene terephthalate (PBT)
    Emitter and ReceiverPolycarbonate (PC)
    * 1. Value when the detected object is moved in a lateral direction of the slot.
    * 2. The measured response frequency indicates the value when the disk shown in the right figure is rotated.
    Grooved Connector/Pre-Wired Type Photomicrosensor (Direct Current Light) [EE-SX97/47/67], product specification 9

    Cautions and Prohibitions

    Cautions and Prohibitions

    This product cannot be used for the purpose of detecting the human body, either directly or indirectly, to ensure safety.
    Do not use this product as a detection device for human body protection.

    Safety Precautions

    Operating environment

    The protective structure of this sensor is IP50 (compliant with IEC60529), and it is not waterproof or dust-proof.
    Do not use in applications where liquids such as water or oil adhere to the main body.

    Precauti