Dedicated Crimpers for Coaxial Connectors.
:
MISUMI
A crimp tool that supports various coaxial connectors used when fixing cable and the connection of the contact is crimping type.
● Tool used when contact connection and cable fixing are crimp model
· Select a compatible tool upon checking the compatible tool chart shown below.
· Crimp after adjusting the crimp strength.
· There is no calibration for the die mounting model tool.
· In the case of separation model dies, the mounting screws are included with the dies.
Specifications
■Separation Type Dies
| Model Number | Type | Weight |
| (g) | ||
| SW-BNC-A | Dies | 55 |
| HT-3363FM | Tool Body | 450 |
■Die Set Type
| Model Number | Weight |
| (g) | |
| CR-56-0908 | 254.5 |
| 50-1113 | 351 |
| 50-0203 | 349 |
| 50-8281 | 531.5 |
| DL801F5-YB | 500 |
| DL801G-YB | 500 |
BNC Connector
BNC Connector Connection Method
Soldering Method
Cable End Treatment Dimensions (Soldered)
| Cable End Treatment Symbol | A | B | C |
|---|---|---|---|
| H-1 | 5.5 | 2.5 | 3.0 |
| H-2 | 6.5 | 2.5 | 4.0 |
| H-3 | 6.6 | 2.2 | 3.0 |
| H-4 | 7.0 | 3.8 | 3.2 |
| H-5 | 7.2 | 3.2 | 3.0 |
| H-6 | 7.5 | 4.5 | 3.0 |
| H-7 | 7.5 | 3.0 | 3.0 |
| H-8 | 8.5 | 2.4 | 3.0 |
| H-9 | 9.0 | 2.5 | 3.0 |
| H-10 | 10.8 | 4.8 | 3.0 |
| H-11 | 10.5 | 4.5 | 3.5 |
| H-12 | 10.8 | 4.8 | 3.0 |
| H-13 | 11.5 | 5.2 | 3.0 |
| H-14 | 13.0 | 10.6 | 2.4 |
| H-15 | 13.5 | 8.5 (Note 1) | 5.0 |
| H-16 | 15.0 | 10.0 (Note 2) | 5.0 |
| H-17 | 12.5 | 6.0 | 3.0 |
| H-18 | 7.8 | 2.3 | 4.0 |
(Note 1) Adjust by cutting the length of the shield to 5 mm.
(Note 2) Adjust by cutting the length of the shield to 6 mm.
Crimping Method 1
(For 050-JZ27C, please refer to crimping method 2)
Cable End Treatment Dimensions (Crimped)
| Cable End Treatment Symbol | A | B | C |
|---|---|---|---|
| C-1 | 9.5 | 1.5 | 6.0 |
| C-2 | 7.5 | 3.5 | 4.0 |
| C-3 | 7.0 | 4.0 | 4.0 |
| C-4 | 7.5 | 8.5 | 2.5 |
| C-5 | 7.5 | 1.5 | 2.5 |
Crimping Method 2
For 050-JZ27C