Leveling Mounts Metal Pad Standard_VNM

Product Description
Economy series Adjuster Flat bottom standard type.
Type: Adjuster Bolt and Flat bottom.
Part number for series including of LVC-CNFJN and LVC-CNFJNS.
Body Material: Steel and Stainless steel.
Surface Treatment: Galvanizing solution for Steel.
Nominal of Thread size (M): 10, 12, 16 and 20.
Thread Length size: 80, 100, 120, 150 and 200 mm.
Screw is smooth and can be manually for assembly.
This is an economy series; The price is cheaper than the MISUMI standard product.
 Economy series Adjuster Flat bottom standard type.
An adjuster with high quality, cheap price and excellent cost performance.
 [Adjuster Features]
When the threaded part rotates, it inclines slightly.
No height adjustment knob.
 
 

Type	Thread		Body
	Material	Surface Treatment	Material	Surface Treatment
LVC-CNFJN	Steel	Galvanizing	Steel	Galvanizing
LVC-CNFJNS	Stainless Steel	-	Stainless Steel	-

 

Product code				L	X	E	Loading (kg/pcs)
Product type	D (mm)	M (mm)	Z (mm)
LVC-CNFJN LVC-CNFJNS	62	12	60	71	49	12	80
			100	111	89	12	80
			120	131	109	12	80
			150	161	139	12	80
	86	16	100	115	86	17	110
			120	135	106	17	110
			150	165	136	17	110

 Recommended adjuster mounting method.
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
 
 1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.