Bearing Spacers For Outer Rings
:
MISUMI
Product Overview
High precision collar, combined with bearing inner ring or outer ring for precise bearing positioning.
Dimensional Drawing
Specifications Overview
・Material Table
| Applicable | L Dimension Tolerance |  Material |  Surface Treatment | d | D | L | |
| Negative Tolerance | Positive Tolerance | ||||||
| For Outer Ring | E-CLBS | E-CLBT | Aluminum Alloy | - | 4~55 | 6~62 | 1.0~100.0 |
| E-CLBSB | E-CLBTB | General structural steel | Ferroferric Oxide Protective Film | ||||
| E-CLBSM | E-CLBTM | Electroless Nickel Plating | |||||
| E-CLBSS | E-CLBTS | SUS304 Equivalent | - | ||||
Specification Table
| Part Number | L 0.1mm increments | d | Dh | Applicable Bearing | |||
| Type | D | ||||||
| For Outer Ring (Negative Tolerance) E-CLBS E-CLBSB E-CLBSM E-CLBSS (Positive Tolerance) E-CLBT E-CLBTB E-CLBTM E-CLBTS | 6 | 1.0~50.0 | 4 | 5 | 673ZZ | ||
| 7 | 5 | 6 | 674ZZ | ||||
| 8 | 5 | 6 | 693ZZ | ||||
| 10 | 7 | 8 | 623ZZ | ||||
| 11 | 7 | 8 | 694ZZ | ||||
| 13 | 9 | 10 | 624ZZ | ・695ZZ | |||
| 14 | 10 | 11 | 605ZZ | ||||
| 15 | 10 | 11 | 696ZZ | ||||
| 16 | 11 | 12 | 625ZZ | ||||
| 17 | 3.0~50.0 | 12 | 13 | 606ZZ | |||
| 19 | 14 | 15 | 626ZZ | ・698ZZ | |||
| 19A | 3.0~100.0 | 16 | 17 | 6800ZZ | |||
| 21 | 18 | 19 | 6801ZZ | ||||
| 22 | 17 | 18 | 608ZZ | ・6900ZZ | |||
| 24 | 19 | 20 | 628ZZ | ・6901ZZ | |||
| 24A | 21 | 22 | 6802ZZ | ||||
| 26 | 20 | 21 | 6000ZZ | ||||
| 26A | 23 | 24 | 6803ZZ | ||||
| 28 | 22 | 23 | 6001ZZ | ・6902ZZ | |||
| 30 | 24 | 25 | 6200ZZ | ||||
| 32 | 25 | 26 | 6201ZZ | ・6002ZZ | |||
| 32A | 29 | 30 | 6804ZZ | ||||
| 35 | 29 | 30 | 6202ZZ | ||||
| 37 | 31 | 32 | 6904ZZ | ||||
| 37A | 34 | 35 | 6805ZZ | ||||
| 42 | 34 | 35 | 6004ZZ | ・6905ZZ | |||
| 42A | 39 | 40 | 6806ZZ | ||||
| 47 | 39 | 40 | 6204ZZ | ・6005ZZ | ・6906ZZ | ||
| 47A | 44 | 45 | 6807ZZ | ||||
| 52 | 45 | 46 | 6205ZZ | ||||
| 52A | 49 | 50 | 6808ZZ | ||||
| 55 | 46 | 47 | 6006ZZ | ||||
| 62 | 55 | 56 | 6206ZZ | ・6007ZZ | ・6908ZZ | ||
| 70 | 63 | 64 | 6207ZZ | ||||
Product Features
Feature 1: Available in three materials including general structural steel, aluminum alloy and SUS304 (equivalent), in which general structural steel is available in two types of surface treatment including ferroferric oxide protective film and electroless nickel plating.
Feature 2: Used in combination with bearing, it is available in inner ring type and outer ring type, respectively matching the inner ring and outer ring of the bearing, which assists in precise positioning of the bearing.
Feature 3: Convenient selection of the adjusting ring for bearing according to to the standard model of bearing.
Feature 4: The length of adjusting ring for bearing can be freely specified within the range according to the actual design needs.
Feature 2: Used in combination with bearing, it is available in inner ring type and outer ring type, respectively matching the inner ring and outer ring of the bearing, which assists in precise positioning of the bearing.
Feature 3: Convenient selection of the adjusting ring for bearing according to to the standard model of bearing.
Feature 4: The length of adjusting ring for bearing can be freely specified within the range according to the actual design needs.
Usage Method
| Product Drawings | Intended Use |
 | Preload can be applied to the bearing by pressing down on the inner ring and adjusting the tightening of the outer ring with a nut. |
 | The outer side is clamped by screw washer, while the inner side is limited by collar for outer ring, thus achieving the effect of axial positioning between two bearings. |
 | Collars can be selected according to the standardized mounting dimensions (Ds) of bearings in the Specification Table. |
Precautions
①If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those made of SUS304 (equivalent).
For surface treatment and anti-rust method, refer to
Technology Page
②The delivery time for products with a length less than 3mm is long, while the delivery time for products with a thickness of 3mm or more is short, only 3 working days.
③As the matching rotary shaft requires high precision, use it in combination with MISUMI Standard Rotary Shaft whenever possible.
For surface treatment and anti-rust method, refer to
Technology Page②The delivery time for products with a length less than 3mm is long, while the delivery time for products with a thickness of 3mm or more is short, only 3 working days.
③As the matching rotary shaft requires high precision, use it in combination with MISUMI Standard Rotary Shaft whenever possible.
Example of Use
Mechanism name:
round belt conveyor
Mechanism function:
It is driven by motor and uses round belt for transmission to transport thin plates and other plate-like or lightweight objects.
Intended use of adjusting ring for bearing
The adjusting ring is used for segmentation and precise positioning between the idler and the pulley, thus ensuring the linearity of idlers and pulleys fixed on different rotating shafts.
For detailed information, clickinCADLibrary Application Library
round belt conveyor
Mechanism function:
It is driven by motor and uses round belt for transmission to transport thin plates and other plate-like or lightweight objects.
Intended use of adjusting ring for bearing
The adjusting ring is used for segmentation and precise positioning between the idler and the pulley, thus ensuring the linearity of idlers and pulleys fixed on different rotating shafts.
For detailed information, click
inCADLibrary Application LibraryApplication Industries
| Electronic & Electrical | Smart Phones | Medical | ||
 |  |  | ||
| Robotics | Semiconductor | Lithium battery | ||
 |  |  |
Related Products
| Rotary shaft Straight bar type | Rotary shaft Single step Shouldered | Bearing with Housing Single Bearing Type with Retaining Ring | ||
 |  |  | ||
| Representative model: PSFHR20-300 | Representative model: KZFN30-350-T20-P30-LA50-Q25-LB30 | Representative model: BGRAB6000ZZ | ||
| Advantages: various alterations, short delivery time | Advantages: various alterations, short delivery time | Advantages: full range, suitable for rotating parts requiring high precision |
Related Documents