Economy Magnets with Holders - High Strength Flat Type
:
MISUMI
Product Overview
■Product overview
・This magnetic component consists of a magnet and a metal housing.
・It is versatile and can be used in automated machinery, automotive ceiling lights, cabinets, door stops, and ceiling fixtures, among other applications.
■MISUMI Economy series Magnets with Holders come in a variety of cases for easier installation, and the holding force increases by more than 2 times compared to Magnets without holder.
・This magnetic component consists of a magnet and a metal housing.
・It is versatile and can be used in automated machinery, automotive ceiling lights, cabinets, door stops, and ceiling fixtures, among other applications.
■MISUMI Economy series Magnets with Holders come in a variety of cases for easier installation, and the holding force increases by more than 2 times compared to Magnets without holder.
Dimensional Drawing
Unit：mm
| Part Number | ① | ② | Heat Resistant Temperature | ③ | Polarity | |||
 Material |  Surface Treatment | Material | Surface Treatment | Material | Front | Back | ||
| C-HXF | SUM23 Equivalent | Electroless Nickel Plating | Neodymium Magnet | Nickel Plating | 80℃ | Brass (Equivalent to C3603BD) | N | S |
Specification Table
| Part Number | L | M×P (Coarse) | Attraction Force N｛kgf｝ | Surface Magnetic Flux Density Gauss［G］ | d1 | d2 | B | |
| Type | D | |||||||
| C-HXF | 4 | 5 | M2×0.4 | 1.5｛0.1｝ | 2400～2800 | 2 | 3 | 2.5 |
| 5 | 2.0｛0.2｝ | 2600～3000 | 2.5 | 3.5 | ||||
| 6 | 8 | M3×0.5 | 5.9｛0.6｝ | 2100～3000 | 4 | 5 | 3 | |
| 8 | 9.8｛1.0｝ | 2300～3300 | 6 | 7 | ||||
| 10 | M4×0.7 | 20.6｛2.1｝ | 2500～3600 | 8 | 9 | |||
| 13 | 10 | 45.1｛4.6｝ | 2500～3600 | 10 | 11 | 4 | ||
| 16 | M5×0.8 | 89.2｛9.1｝ | 3000～4400 | 12 | 14 | 5 | ||
| 20 | 128.5｛13.1｝ | 3200～4600 | 15 | 18 | ||||
| 25 | 13 | M6×1.0 | 225.5｛23.0｝ | 3200～4600 | 18 | 23 | ||
Attraction Force and Surface Flux Density are reference values for magnets alone.Product Features
1，It has one of the strongest attraction forces among all magnet with holder.
2，The smooth, level adhesive surface prevents dirt buildup.
2，The smooth, level adhesive surface prevents dirt buildup.
| Neodymium Magnets with Holders | Neodymium magnets are the most powerful magnets of all, and are ideal for reducing size and increasing the performance of devices. The disadvantage is that it is very easy to rust. Cobalt magnet and it are known as rare earth magnets. |
| Cobalt Magnets with Holders | It is officially known as samarium cobalt magnet, with a strong magnetic force second only to neodymium magnet. Its advantage is being not prone to rusting and resistant to high temperature. But it has poor mechanical strength and is easy to be broken, so be careful when using. |
| Ferrite Magnets with Holders | Ferrite magnets have a weak magnetic force but relatively high retentivity, and magnetism is not easy to decay. It has poor mechanical strength and is easy to be broken, so be careful when using. |
| Al-Fe-Ni-Co Magnets with Holders | It has both the advantage of high temperature resistance and excellent mechanical strength. The disadvantage is that magnetism is very easy to attenuate. |
Precautions
All Magnets with Holders materials are very fragile, no alteration is available.
· Magnets with Holders may be damaged if they are subjected to strong impacts. Be careful during use.
· The magnetic field generated by Magnets with Holders may cause adverse effects on the following items.
Electronic devices such as cell phones, computers, clocks and watches,
and electronic medical devices such as pacemakers.
·The magnetic force may deteriorate when used at above the maximum operating temperature.
· Strong impact or alteration on magnets may cause magnetic force losses.
· To prevent direct impacts on Magnets with Holders, maintain a clearance of 0.1 ~ 0.3mm or more.
The adsorption force of powerful neodymium magnets is about 30% higher than that of standard neodymium magnets. When taken out of the packaging bag, if there aremagnetic objects nearby, it may jump out and be sucked, causing the product to crack. Please be careful when using.Example of Use
| Example of Use ① Magnets with Holders, Small PCB Soldering Fixture Magnetic attraction is used to hold the harness Purpose & Operation A soldering fixture to hold the PCB with a side clamp, and hold the harness by attracting the cover with a magnet. Link address: //vn.misumi-ec.com/asia/incadlibrary/detail/000074.html |  |
| Example of Use ② Magnets with Holders, Free Angle Soldering Fixture Easy one-touch workpiece holding mechanism Purpose & Operation A fixture to securely hold the workpiece without clearance during welding operations. Soldering to positions with poor working efficiency. Link address: //vn.misumi-ec.com/asia/incadlibrary/detail/000004.html |  |