Open Timing Belt T5/T10

Open belts are components that transmit the rotational power generated by the motor.
They achieve transmission and delivery through the engagement between the timing pulley and the timing belt teeth.
Open belts are suitable for reciprocating motion and are equipped with a variety of connecting metal parts.

 

■Material

Material
①Main Body	②Core wire
Polyurethane (white)	Steel wire

 

Belt Type	Pitch	2θ(°)	H	h	i	Unit weight
						g/m(Width 10mm)
T5	5	40	2.5	1.2	1.3	25
T10	10	40	4.7	2.5	2.2	39

Polyurethane belts may change color over time, but the strength and other factors will not be affected.
Operating temperature -20℃～60℃.
Total length (number of teeth x pitch).
This product is not suitable for gapless timing pulleys.
The weight is a theoretical value and may differ from the actual weight

■Specifications

Type	Belt type	Nominal belt width	Number of teeth Upper limit~lower limit	Belt width (mm)	Allowable tension (N)
E-LTTBO (Standard type) E-LTBOHA (Tooth-Side Fabric Coated Type) E-LTBONA (Back-Side Fabric Coated Type) E-LTBORA (Double-Sided Fabric Coated Type)	T5	100	60～10000	10	272
		150		15	382
		200		20	466
		250		25	679
	T10	150	40～10000	15	775
		200		20	1150
		250		25	2000
		300		30	2457
		400		40	3276
		500		50	4095

The total length is (number of teeth × tooth pitch).
kgf＝N×0.101972

Feature 1: The product has embedded steel wire core, which is more cost-effective and has a wider range of applications.
Feature 2: There is no exposed steel wire core on the side of the opening to avoid scratching the opponent or injuring the operator.
Feature 3: It can be used in conjunction with the toothed plate for timing belt connection, linear guide rails, single-axis drives and other products, and is suitable for equipment with a high degree of automation.
Feature 4: Compared with chain drives, Open timing belts are lighter, produce less noise, and do not require lubricants, making them cleaner.

■Storage Precautions
①Avoid sunlight.
②Do not use in an environment with direct contact with water, solvents, oil, acid, alkali, ultraviolet rays, ozone, etc.
 Especially do not allow oil to adhere to the belt, otherwise it will cause the belt to swell and significantly shorten the service life of the belt.
③Using temperature -20℃～60℃.
④Do not pile up in large quantities or bend forcibly.
⑤Do not place directly on the ground.
⑥Do not allow the belt to come into contact with chemicals.