Single Axis Robots E-MCB5 Precision Belt Drive, Fully-Sealed Type(For Clean Environment)

MISUMI

The product does not come with a driver, which must be purchased separately
The product comes with a sensor kit, which is unnecessary to select

Economy series Aluminum Alloy Belt Drive Actuators E-MTB5 Series product only includes the main unit, not the motor and the driver, which must be purchased separately. The product comes with 3 NPN sensors, for which only mounting direction needs to be selected.

Product Overview of Single Axis Robots

Economy series Single Axis Robots are transmission devices integrating timing belts and guides, which are indispensable for the production process.
Up to ±0.04 or less.

Dimensional Drawing of Single Axis Robots

Components	Body	Guide	Timing Belt	Timing Pulley	Slide Block	Cover
Material	Aluminum Alloy	Carbon Steel	Rubber	S45C Equiv.	Aluminum Alloy	Aluminum Alloy
Surface Treatment	Clear Anodized	－	－	Nickel Plated	Clear Anodized	Clear Anodized

Specification Overview of Single Axis Robots

Specification Table of Single Axis Robots

Part Number	Lead (mm)	Stroke (50m increments)	Motor Position	Motor Brand	Motor Power	Sensor Position	Repetitive Positioning Accuracy (mm)	Max. Payload (kg)		Max. Speed (mm/sec)	Rated Thrust (N)
Type								Horizontal Use	Vertical Use
E-MCB5	40	50~800	BW (Motor On Upper Side) BM (Motor On Lower Side)	M (Misumi / Mitsubishi) P (Panasonic) Y (Yaskawa) T (Delta Electronics) Z (Prepared by Customer)	10 (100W)	C (Left Side) D (Right Side)	±0.04	3	－	2000	42

A motor is not included to this product and it must be purchased separately.
Single Axis Robots

This product cannot be used vertically.
Single Axis Robots

When the motor brand is specified as Z, the motor shaft diameter and installation dimensions must be provided.
Single Axis Robots

As the drawings are schematic diagrams, please confirm the detailed dimensions according to CAD data.

Part Number	Lead (mm)	Reducer	Max. Movement Speed (mm/sec)
			50	200	400	600	800
E-MCB5	40	Not Provided	2000

Values in the table are reference values calculated according to the critical speed and DN value of the belt.

Values in the table indicate the maximum safe speed for each stroke, as well as the maximum safe speed for standard strokes. Exceeding these speeds can increase beltwear, cause belt breakage and shorten the service life.

Accessories

Example Use of Single Axis Robots

Overhung Distance of Torque Center of Gravity

■ Sensing Line Wiring Diagram

■ List of Recommended Servo Motors
Recommended Motor

■ Motor Mounting Port
Motor Mounting Hole

Product Features of Single Axis Robots

1. Single Axis Robots, Simple design and installation
2. Single Axis Robots, High precision ±0.04
3. Single Axis Robots, Complete supporting accessories

Precautions of Single Axis Robots

■ Avoid using Single Axis Robots products in the following environments
① Dusty environment (especially metal powder)
② Environment with splashing water and oil
③ Near fire sources
④ Environment with excessive organic solutions and salt
⑤ Environment with direct sunlight and heat radiation
⑥ Environment subject to strong vibration and shock
⑦ Environment with corrosive gas, combustible gas

■ Single Axis Robots operating environment
Operating environment: normal temperature (no freezing, non-condensation)