(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thông báo điều chỉnh giảm giá bán linh kiện Economy series: Giảm 30% toàn bộ sản phẩm và giảm thêm theo số lượng. Xem chi tiết.
Notice of the price adjustment for Economy series products: Decrease by 30% and further discount by volume. See more. - Thông báo về thay đổi thuế suất 8% từ 1/7/2023 đến 31/12/2023. Xem chi tiết.
Notice about the application of 8% tax policy from 1/7/2023 to 31/12/2023. See more.
Product Detail
Assembly Height H
No. of Blocks
Set / Single Item
Nominal Part Number
Surface Treatment
Rail Length L
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Assembly Height H(mm)
-
No. of Blocks
-
Set / Single Item
- Set
- Block Only
-
Nominal Part Number
-
Surface Treatment
- None
- Vacuum Chrome Plating
-
Rail Length L(mm)
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 8 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Miniature Linear Guides Wide Rails (E-GMLGW9-50)
- Volume Discount
Brand :
MiSUMi Economy
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product Detail
If you have requirements on anti-rust performance, please give priority to product models in the vacuum chrome plating series.
For vacuum chrome plating products, only the rail part is treated, while the cut surface on both ends is not treated.
Optional heights and lengths are within the overall range of this series. Refer to the Specification Table for details.
Product Overview
Linear guide, also known as slide rail or linear slide, which is used for linear reciprocating motion, has higher rated load and linear motion precision than linear bearings under the same moving component volume. Also, it bears a certain torque load, achieving high-precision linear motion under high load.
Used to support and guide moving parts, linear guides make reciprocating linear motion in a specified direction. It is mainly used in mechanical structures with high precision requirements. Rolling steel balls are used instead of intermediate medium between the moving element and the fixed element of the linear guide rail.
Used to support and guide moving parts, linear guides make reciprocating linear motion in a specified direction. It is mainly used in mechanical structures with high precision requirements. Rolling steel balls are used instead of intermediate medium between the moving element and the fixed element of the linear guide rail.
Product Features
Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the control device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the control device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Dimensional Drawing
Specifications Overview
 Material Hardness | Block Type | Surface Treatment | Nominal Model | Optional length L (mm) | Optional Height H (mm) | |
| Carbon Steel 58HRC～ | Standard block type | No Surface Treatment | 7,9,12,15 | 50 to 670 | 9,12,14,16 | |
| Vacuum Chrome Plating | ||||||
If you have requirements on anti-rust performance, please give priority to product models in the vacuum chrome plating series.For vacuum chrome plating products, only the rail part is treated, while the cut surface on both ends is not treated.Optional heights and lengths are within the overall range of this series. Refer to the Specification Table for details.Usage Method
■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Vacuum Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Vacuum Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
Precautions
For normal use, the installation of the linear guide needs to meet the following four points:
① Whether the shape of the mounting surface produces interference
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard
installation method Click
here for the detailed installation method
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard
installation method Click
here for the detailed installation methodExample of Use
Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.
For details, click here
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.
For details, click
hereApplication Industries
| Medical | Smart phone | |
 |  | |
| Robotics | Electronic & Electrical Appliances | |
 |  |
Related Products
| Miniature Linear Guides | Medium Load linear guide | Heavy Load linear guide | ||
 |  |  | ||
| Typical model: SSEBZ10-55 | Typical model: SVR24-280 | Typical model: SXR24-280 |
Related Documents
For the installation and use of linear guides, please refer to here
herePart Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| E-GMLGW9-50 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Rail Length L (mm) | Assembly Height H (mm) | No. of Blocks | Set / Single Item | Nominal Part Number | Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 8 Day(s) | 50 | 12 | 1 | Set | 9 | Vacuum Chrome Plating |
Loading...Tải…
■ L Dimension Configurable Type
The kit includes 1 block. For additional blocks, please purchase a single block model.
This product is made of carbon steel. If you have requirements on anti-rust performance, please select the vacuum chrome plating model.
For the vacuum chrome plating model, treatment is made to rails only, not the cut surface.
Dimension E of length specified type needs to be calculated. Please refer to "Detailed dimension of Dimension L specified type" for calculation method.
The running parallelism is the value after the slide rail is fixed. (It is not the value before the screws of the slide rail are tightened.)
Optional heights and lengths are the overall range of this series. Refer to the Specification Table for details.
■Allowable Load
■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below.
Miniature Linear Guides Wide Rails -Standard rail-
Precision Benchmark
●Running Parallelism
[Running Parallelism]
The values in the table are all measured after the slide rail is fixed on the reference base.
When moving the slider within the full length of the slide rail, measure the change of the block upper surface C relative to the slide rail bottom surface A and the change of the block reference surface D relative to the slide rail reference surface B.
Dimensional Drawing
Specification Table
| Material Hardness | Block Type | Surface Treatment | Nominal Model | Optional length L (mm) | Optional Height H (mm) | |
| Carbon Steel 58HRC～ | Standard Block Type (Kit) | No Surface Treatment | 7,9,12,15 | 50 to 900 | 9,12,14,16 | |
| Vacuum Chrome Plating | ||||||
| Standard Block Type (Single block) | No Surface Treatment | 7,9,12,15 | - | 9,12,14,16 | ||
■ L Dimension Configurable Type
| Nominal Model | L (Specified Length) | Unit Dimensions (mm) | Block Dimensions (mm) | Guide Rail Dimensions (mm) | ||||||||||||||||||
| h | H1 | N | W | B | B1 | C | L1 | L2 | Gn | M×L | H2 | WR | WB | HR | D | h | d | E | P | |||
| Standard block type | 7 | 50 to 900 | 9 | 1.9 | 5.5 | 25 | 19 | 3 | 10 | 21 | 31.2 | φ1.2 | M3×3 | 1.85 | 14 | - | 5.2 | 6 | 3.2 | 3.6 | Please refer to the calculation table below | 30 |
| 9 | 50 to 900 | 12 | 2.9 | 6 | 30 | 21 | 4.5 | 12 | 27.5 | 39.75 | φ1.2 | M3×3 | 2.4 | 18 | - | 7 | 6 | 4.5 | 3.6 | 30 | ||
| 12 | 70 to 900 | 14 | 3.4 | 8 | 40 | 28 | 6 | 15 | 31.3 | 45.9 | φ1.2 | M3×3.6 | 2.8 | 24 | - | 8.5 | 8 | 4.5 | 4.5 | 40 | ||
| 15 | 70 to 900 | 16 | 3.4 | 9 | 60 | 45 | 7.5 | 20 | 38 | 54.85 | M3 | M4×4.2 | 3.2 | 42 | 23 | 9.5 | 8 | 4.5 | 4.5 | 40 | ||
The kit includes 1 block. For additional blocks, please purchase a single block model.This product is made of carbon steel. If you have requirements on anti-rust performance, please select the vacuum chrome plating model.For the vacuum chrome plating model, treatment is made to rails only, not the cut surface.Dimension E of length specified type needs to be calculated. Please refer to "Detailed dimension of Dimension L specified type" for calculation method.The running parallelism is the value after the slide rail is fixed. (It is not the value before the screws of the slide rail are tightened.)Optional heights and lengths are the overall range of this series. Refer to the Specification Table for details.
■Allowable Load
| Nominal Model | Basic Rated Load | Static Allowable Moment | Mass | |||
| C (Dynamic) kN | Co (Static) kN | MA・MB kN-m | MC kN-m | Blocks kg | Guide Rails kg/m | |
| 7 | 1.37 | 2.06 | 7.14 | 15.7 | 0.02 | 0.51 |
| 9 | 2.75 | 4.12 | 18.96 | 40.12 | 0.04 | 0.91 |
| 12 | 3.92 | 5.59 | 27.8 | 70.34 | 0.071 | 1.49 |
| 15 | 6.77 | 9.22 | 56.66 | 199.34 | 0.143 | 2.86 |
■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below.
Miniature Linear Guides Wide Rails -Standard rail-
| h | 9 | 12 | 14 | 16 | Number of mounting holes M |
| L | 50～67 | 50～67 | 70～89 | 70～89 | 2 |
| 68～97 | 68～97 | 90～129 | 90～129 | 3 | |
| 98～127 | 98～127 | 130～169 | 130～169 | 4 | |
| 128～157 | 128～157 | 170～209 | 170～209 | 5 | |
| 158～187 | 158～187 | 210～249 | 210～249 | 6 | |
| 188～217 | 188～217 | 250～289 | 250～289 | 7 | |
| 218～247 | 218～247 | 290～329 | 290～329 | 8 | |
| 248～277 | 248～277 | 330～369 | 330～369 | 9 | |
| 278～307 | 278～307 | 370～409 | 370～409 | 10 | |
| 308～337 | 308～337 | 410～449 | 410～449 | 11 | |
| 338～367 | 338～367 | 450～489 | 450～489 | 12 | |
| 368～397 | 368～397 | 490～529 | 490～529 | 13 | |
| 398～427 | 398～427 | 530～569 | 530～569 | 14 | |
| 428～457 | 428～457 | 570～609 | 570～609 | 15 | |
| 458～487 | 458～487 | 610～649 | 610～649 | 16 | |
| 488～517 | 488～517 | 650～689 | 650～689 | 17 | |
| 518～547 | 518～547 | 690～729 | 690～729 | 18 | |
| 548～577 | 548～577 | 730～769 | 730～769 | 19 | |
| 578～607 | 578～607 | 770～809 | 770～809 | 20 | |
| 608～637 | 608～637 | 810～849 | 810～849 | 21 | |
| 638～667 | 638～667 | 850～889 | 850～889 | 22 | |
| 668～697 | 668～697 | 890～900 | 890～900 | 23 | |
| 698～727 | 698～727 | - | - | 24 | |
| 728～757 | 728～757 | 25 | |||
| 758～787 | 758～787 | 26 | |||
| 788～817 | 788～817 | 27 | |||
| 818～847 | 818～847 | 28 | |||
| 848～877 | 848～877 | 29 | |||
| 878～900 | 878～900 | 30 |
Precision Benchmark
Dimensional Precision
Unit: μm
| Dimensional Precision Type | Precision Standard | Normal |
| Miniature | Height H Tolerance | ±40 |
| Height H Pair Variation | 30 | |
| Width N Tolerance | ±40 | |
| Width N Pair Variation | 30 |
●Running Parallelism
| Rail Length (mm) | Accuracy grade (μm) |
| 50 or Less | 12 |
| 50-80 | 13 |
| 80-125 | 15 |
| 125-200 | 15 |
| 200-250 | 16 |
| 250-315 | 17 |
| 315-400 | 18 |
| 400-500 | 19 |
| 500-630 | 20 |
| 630-730 | 22 |
[Running Parallelism]
The values in the table are all measured after the slide rail is fixed on the reference base.
When moving the slider within the full length of the slide rail, measure the change of the block upper surface C relative to the slide rail bottom surface A and the change of the block reference surface D relative to the slide rail reference surface B.
Basic InformationThông tin cơ bản
| Block Type | Standard Block | Rail Type | Wide Rail | Preload | Clearance |
|---|---|---|---|---|---|
| Accuracy Standards | Standard Grade | Material | Carbon Steel | Lubrication Type | Lubrication Applied |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: Can linear guides or sliders be purchased separately?
- Answer:Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
- Question:Question: Can the stainless steel guide rails be guaranteed not to rust?
- Answer:Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
- Question:Question: What problems should be paid attention to when the linear guide is installed vertically?
- Answer:Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
- Question:Question: What does micro preloading in linear guide mean?
- Answer:Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
- Question:Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?
- Answer:Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
- Question:Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?
- Answer:Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
- Question:Question: Can the rail or slider be repaired if it is damaged?
- Answer:Answer: Repair service is not provided, re-purchase is recommended.
- Question:Question: Can linear guide length be arbitrarily specified?
- Answer:Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.
Additional Products in this Category
- Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
- Miniature Linear Guides - Wide Rails - Standard Blocks, Light Preload / Slight Clearance
- Linear Guides Wide Long Blocks
- Full-Ball Type LM Guide, International Standard, HSR Type
- [Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type
- Linear Rail System SBI-SV Series
- LM Guide Standard TRS-V Type (Rail+Block Set)
- LM Guide Block - Standard TRH-F Type (Block Unit)
MISUMI Contact
TALK ID : Misumi_vn
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy