Toothed Timing Belts S14M

MISUMI

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

RoHS Compliant Product

Product Overview

Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

Specifications Overview

■Material/Specification Table

Type	Material
C-HTBN	① Rear Rubber	Chloroprene
	② Tooth Rubber
	③ Core Wire	Glass Fiber
	④ Backing Cloth	Nylon Canvas

Type	Tooth Pitch	Ra	Lr	H	h	i	PLD	Unit Weight g/m (Width: 10mm)
S14M	14	9.1	9.1	10.2	5.3	4.9	1.397	100

Belt circumference length is core wire length.

C-HTBN belt operating temperature range: -30 to 90 ℃.

The model engraved on the back of the product is the manufacturer model.

For the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.

■C-HTBN
■Type S14M (Tooth pitch: 14mm)

Part Number		Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
C-HTBN (Chloroprene)	1008 S14M	400 (40mm) 600 (60mm)	72	1008
	1050 S14M		75	1050
	1064 S14M		76	1064
	1092 S14M		78	1092
	1120 S14M		80	1120
	1148 S14M		82	1148
	1176 S14M		84	1176
	1190 S14M		85	1190
	1232 S14M		88	1232
	1246 S14M		89	1246
	1260 S14M		90	1260
	1288 S14M		92	1288
	1330 S14M		95	1330
	1344 S14M		96	1344
	1358 S14M		97	1358
	1400 S14M		100	1400
	1456 S14M		104	1456
	1470 S14M		105	1470
	1512 S14M		108	1512
	1540 S14M		110	1540
	1610 S14M		115	1610
	1652 S14M		118	1652
	1708 S14M		122	1708
	1736 S14M		124	1736
	1750 S14M		125	1750
	1764 S14M		126	1764
	1778 S14M		127	1778
	1806 S14M		129	1806
	1890 S14M		135	1890
	1904 S14M		136	1904

Part Number		Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
C-HTBN (Chloroprene)	1932 S14M	400 (40mm) 600 (60mm)	138	1932
	1960 S14M		140	1960
	1946 S14M		139	1946
	2002 S14M		143	2002
	2100 S14M		150	2100
	2156 S14M		154	2156
	2198 S14M		157	2198
	2240 S14M		160	2240
	2310 S14M		165	2310
	2338 S14M		167	2338
	2380 S14M		170	2380
	2450 S14M		175	2450
	2506 S14M		179	2506
	2520 S14M		180	2520
	2590 S14M		185	2590
	2604 S14M		186	2604
	2660 S14M		190	2660
	2800 S14M		200	2800
	2940 S14M		210	2940
	3136 S14M		224	3136
	3150 S14M		225	3150
	3360 S14M		240	3360
	3500 S14M		250	3500
	3556 S14M		254	3556
	3850 S14M		275	3850
	4004 S14M		286	4004
	4060 S14M		290	4060
	4326 S14M		309	4326
	4410 S14M		315	4410
	4508 S14M		322	4508

Product Features

		■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃.
		■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃.
		■ Trapezoidal tooth profile rubber timing belt (MXL/XL/L/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Usage Method

■ Installation method for timing belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

①Do not bend the belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

②Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Example of Use

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	① Driving (The driven wheel is driven by the driving wheel for transmission)
	② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	③ Conveyance (Plates are conveyed by two timing toothed belts)
	④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Application Industries

Food	Semiconductor	Smartphone

Automotive	Electronic & Electrical Appliances	Medical

High Torque Timing Pulleys S2M Type	Flat Belt	Timing Belts MXL

Representative model: HTPA48S2M040-B-N10	Representative model: HBLT350-4.23	Representative model: C-TBN236MXL025