(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(807 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN60XL025
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Core Wire Material

    • Glass Fiber
      • Glass Core Wire
      • Glass Fiber

    ClearTrống

  • Belt Width (mm)(mm)

    • 6.4
    • 7.9
    • 9.5
    • 12.7

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.25
    • 0.31
    • 0.37
    • 0.5

    ClearTrống

  • Circumference Length(mm)

    • 152.4
    • 157.48
    • 162.56
    • 172.72
    • 177.8
    • 182.88
    • 187.96
    • 193.04
    • 198.12
    • 203.2
    • 208.28
    • 213.36
    • 218.44
    • 223.52
    • 228.6
    • 233.68
    • 238.76
    • 243.84
    • 248.92
    • 254
    • 259.08
    • 264.16
    • 269.24
    • 274.32
    • 279.4
    • 284.48
    • 289.56
    • 294.64
    • 299.72
    • 304.8
    • 309.88
    • 314.96
    • 320.04
    • 325.12
    • 330.2
    • 335.28
    • 340.36
    • 345.44
    • 350.52
    • 355.6
    • 360.68
    • 365.76
    • 370.84
    • 375.92
    • 381
    • 386.08
    • 391.16
    • 396.24
    • 401.32
    • 406.4
    • 411.48
    • 416.56
    • 421.64
    • 426.72
    • 431.8
    • 436.88
    • 441.96
    • 447.04
    • 452.12
    • 457.2
    • 462.28
    • 467.36
    • 472.44
    • 477.52
    • 482.6
    • 487.68
    • 492.76
    • 497.84
    • 502.92
    • 508
    • 513.08
    • 518.16
    • 523.24
    • 528.32
    • 533.4
    • 538.48
    • 543.56
    • 548.64
    • 553.72
    • 558.8
    • 563.88
    • 568.96
    • 574.04
    • 579.12
    • 584.2
    • 589.28
    • 594.36
    • 599.44
    • 604.52
    • 609.6
    • 614.68
    • 619.76
    • 624.84
    • 629.92
    • 635
    • 640.08
    • 645.16
    • 650.24
    • 655.32
    • 660.4
    • 665.48
    • 670.56
    • 675.64
    • 680.72
    • 685.8
    • 695.96
    • 701.04
    • 706.12
    • 711.2
    • 716.28
    • 721.36
    • 726.44
    • 731.52
    • 736.6
    • 751.84
    • 762
    • 772.16
    • 777.24
    • 782.32
    • 787.4
    • 797.56
    • 802.64
    • 812.8
    • 817.88
    • 828.04
    • 833.12
    • 838.2
    • 843.28
    • 853.44
    • 858.52
    • 863.6
    • 873.76
    • 883.92
    • 889
    • 894.08
    • 904.24
    • 914.4
    • 919.48
    • 924.56
    • 939.8
    • 944.88
    • 955.04
    • 965.2
    • 970.28
    • 975.36
    • 980.44
    • 985.52
    • 990.6
    • 995.68
    • 1005.84
    • 1016
    • 1046.48
    • 1051.56
    • 1066.8
    • 1076.96
    • 1092.2
    • 1097.28
    • 1102.36
    • 1127.76
    • 1143
    • 1168.4
    • 1193.8
    • 1219.2
    • 1244.6
    • 1249.68
    • 1270
    • 1285.24
    • 1295.4
    • 1315.72
    • 1325.88
    • 1346.2
    • 1371.6
    • 1402.08
    • 1407.16
    • 1417.32
    • 1422.4
    • 1432.56
    • 1447.8
    • 1463.04
    • 1473.2
    • 1503.68
    • 1524
    • 1554.48
    • 1564.64
    • 1600.2
    • 1640.84
    • 1701.8
    • 1778
    • 1798.32
    • 2103.12
    • 2184.4
    • 2448.56

    ClearTrống

  • Number of Teeth

    • 30
    • 31
    • 32
    • 34
    • 35
    • 36
    • 37
    • 38
    • 39
    • 40
    • 41
    • 42
    • 43
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 91
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 101
    • 102
    • 103
    • 104
    • 105
    • 106
    • 107
    • 108
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 116
    • 117
    • 118
    • 119
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 133
    • 134
    • 135
    • 137
    • 138
    • 139
    • 140
    • 141
    • 142
    • 143
    • 144
    • 145
    • 148
    • 150
    • 152
    • 153
    • 154
    • 155
    • 157
    • 158
    • 160
    • 161
    • 163
    • 164
    • 165
    • 166
    • 168
    • 169
    • 170
    • 172
    • 174
    • 175
    • 176
    • 178
    • 180
    • 181
    • 182
    • 185
    • 186
    • 188
    • 190
    • 191
    • 192
    • 193
    • 194
    • 195
    • 196
    • 198
    • 200
    • 206
    • 207
    • 210
    • 212
    • 215
    • 216
    • 217
    • 222
    • 225
    • 230
    • 235
    • 240
    • 245
    • 246
    • 250
    • 253
    • 255
    • 259
    • 261
    • 265
    • 270
    • 276
    • 277
    • 279
    • 280
    • 282
    • 285
    • 288
    • 290
    • 296
    • 300
    • 306
    • 308
    • 315
    • 323
    • 335
    • 350
    • 354
    • 414
    • 430
    • 482

    ClearTrống

  • type

    • C-TBN□□□XL

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 6 Day(s) or Less
    • 8 Day(s) or Less
    • 10 Day(s) or Less
    • 12 Day(s) or Less
    • 13 Day(s) or Less
    • 14 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts XL

Timing Belts XL
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
807 Part Numbers Available

C-TBN60XL025 SALE

C-TBN60XL031 SALE

C-TBN60XL037 SALE

C-TBN60XL050 SALE

C-TBN62XL025 SALE

C-TBN62XL031 SALE

C-TBN62XL037 SALE

C-TBN62XL050 SALE

C-TBN64XL025 SALE

C-TBN64XL031 SALE

C-TBN64XL037 SALE

C-TBN64XL050 SALE

C-TBN68XL025 SALE

C-TBN68XL031 SALE

C-TBN68XL037 SALE

C-TBN68XL050 SALE

C-TBN70XL025 SALE

C-TBN70XL031 SALE

C-TBN70XL037 SALE

C-TBN70XL050 SALE

C-TBN60XL025
C-TBN60XL025

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      13,539VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

Timing Belts XL
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: XL (trapezoidal tooth profile)
• Tooth Pitch: 5.08 mm.
• Belt Width: 6.4, 7.9, 9.5 and 12.7 mm.
• Circumference Length Shortest/Longest: 152.4 mm. and 2448.56 mm.
• Belt Operating Temperature Range: -30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Tooth surface protection layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine
See more ...



Economy XL Timing Belt

Length and WidthChloroprene MaterialQuiet Operation

- Customizable Length and Width: Select from a wide range of belt lengths and widths.

- Durable Chloroprene Material: Offers excellent resistance to abrasion, oil, and grease, ensuring long-lasting performance.

- Glass Fiber Reinforced Core: Provides exceptional strength and tensile strength, preventing belt elongation and slippage.

- Quiet Operation: The smooth tooth profile minimizes noise, creating a quieter working environment.

- Wide Operating Temperature Range: Functions reliably in temperatures from -30°C to 90°C, expanding application possibilities.

Economy XL Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and cn_m-h3--wysiwyg.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber

Specifications Overview

TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
XL5.0850°2.571.272.270.380.3822.0 (20.0)
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of XL (inch size) is the belt number.
timing beltBelt circumference length is core wire length.
timing beltC-TBN belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Please order after selecting part number and parameters according to the selection steps timing belt to timing belt.
Ordering Example Part Number (timing beltTypetiming beltBelt Number timing beltNominal Belt Width)
 C-TBN256XL037

■ C-TBN
Tooth profile XL (Tooth pitch: 5.08mm)
Part Numbertiming beltBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
timing beltTypetiming beltBelt Number
C-TBN60XL025
(6.4mm)

031
(7.9mm)

037
(9.5mm)

050
(12.7mm)		30152.40
62XL31157.48
64XL32162.56
68XL34172.72
70XL35177.80
72XL36182.88
74XL37187.96
76XL38193.04
78XL39198.12
80XL40203.20
82XL41208.28
84XL42213.36
86XL43218.44
88XL44223.52
90XL45228.60
92XL46233.68
94XL47238.76
96XL48243.84
98XL49248.92
100XL50254.00
102XL51259.08
104XL52264.16
106XL53269.24
108XL54274.32
110XL55279.40
112XL56284.48
114XL57289.56
116XL58294.64
118XL59299.72
120XL60304.80
122XL61309.88
124XL62314.96
126XL63320.04
128XL64325.12
130XL65330.20
132XL66335.28
134XL67340.36
136XL68345.44
138XL69350.52
140XL70355.60
142XL71360.68
144XL72365.76
146XL73370.84
148XL74375.92
150XL75381.00
152XL76386.08
154XL77391.16
156XL78396.24
158XL79401.32
160XL80406.40
162XL81411.48
164XL82416.56
166XL83421.64
168XL84426.72
170XL85431.80
172XL86436.88
174XL87441.96
176XL88447.04
178XL89452.12
180XL90457.20
182XL91462.28
184XL92467.36
186XL93472.44
188XL94477.52
190XL95482.60
192XL96487.68
194XL97492.76
196XL98497.84
198XL99502.92
200XL100508.00
202XL101513.08
204XL102518.16
206XL103523.24
208XL104528.32
210XL105533.40
212XL106538.48
214XL107543.56
216XL108548.64
218XL109553.72
220XL110558.80
222XL111563.88
224XL112568.96
226XL113574.04
228XL114579.12
230XL115584.20
232XL116589.28
234XL117594.36
236XL118599.44
238XL119604.52
240XL120609.60
244XL122619.76
246XL123624.84
248XL124629.92
250XL125635.00
252XL126640.08
254XL127645.16
256XL128650.24
258XL129655.32
260XL130660.40
262XL131665.48
264XL132670.56
266XL133675.64
268XL134680.72
270XL135685.80
274XL137695.96
276XL138701.04
278XL139706.12
280XL140711.20
282XL141716.28
284XL142721.36
286XL143726.44
288XL144731.52
290XL145736.60
296XL148751.84
300XL150762.00
304XL152772.16
306XL153777.24
310XL155787.40
314XL157797.56
316XL158802.64
320XL160812.80
322XL161817.88
326XL163828.04
330XL165838.20
332XL166843.28
336XL168853.44
338XL169858.52
340XL170863.60
344XL172873.76
348XL174883.92
350XL175889.00
352XL176894.08
356XL178904.24
360XL180914.40
362XL181919.48
364XL182924.56
370XL185939.80
372XL186944.88
376XL188955.04
380XL190965.20
382XL191970.28
384XL192975.36
386XL193980.44
388XL194985.52
390XL195990.60
392XL196995.68
396XL1981005.84
400XL2001016.00
412XL2061046.48
414XL2071051.56
420XL2101066.80
424XL2121076.96
430XL2151092.20
432XL2161097.28
434XL2171102.36
444XL2221127.76
450XL2251143.00
460XL2301168.40
468XL2341188.72
470XL2351193.80
480XL2401219.20
490XL2451244.60
492XL2461249.68
500XL2501270.00
506XL2531285.24
510XL2551295.40
522XL2611325.88
530XL2651346.20
532XL2661351.28
540XL2701371.60
552XL2761402.08
558XL2791417.32
560XL2801422.40
564XL2821432.56
572XL2861452.88
576XL2881463.04
580XL2901473.20
592XL2961503.68
600XL3001524.00
612XL3061554.48
616XL3081564.64
630XL3151600.20
646XL3231640.84
670XL3351701.80
672XL3361706.88
686XL3431742.44
700XL3501778.00
720XL3601828.80
828XL4142103.12
860XL4302184.40
926XL4632352.04
964XL4822448.56
1020XL5102590.80


Product Features

S type circular tooth profile economic type timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belt are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly timing belt, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor timing belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the timing belt)

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Pulleys S2M Type Flat Timing Belt For General Use (Economy Series) Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economic type Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance


Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>
Part Number
C-TBN60XL025SALE
C-TBN60XL031SALE
C-TBN60XL037SALE
C-TBN60XL050SALE
C-TBN62XL025SALE
C-TBN62XL031SALE
C-TBN62XL037SALE
C-TBN62XL050SALE
C-TBN64XL025SALE
C-TBN64XL031SALE
C-TBN64XL037SALE
C-TBN64XL050SALE
C-TBN68XL025SALE
C-TBN68XL031SALE
C-TBN68XL037SALE
C-TBN68XL050SALE
C-TBN70XL025SALE
C-TBN70XL031SALE
C-TBN70XL037SALE
C-TBN70XL050SALE
C-TBN72XL025SALE
C-TBN72XL031SALE
C-TBN72XL037SALE
C-TBN72XL050SALE
C-TBN74XL025SALE
C-TBN74XL031SALE
C-TBN74XL037SALE
C-TBN74XL050SALE
C-TBN76XL025SALE
C-TBN76XL031SALE
C-TBN76XL037SALE
C-TBN76XL050SALE
C-TBN78XL025SALE
C-TBN78XL031SALE
C-TBN78XL037SALE
C-TBN78XL050SALE
C-TBN80XL025SALE
C-TBN80XL031SALE
C-TBN80XL037SALE
C-TBN80XL050SALE
C-TBN82XL025SALE
C-TBN82XL031SALE
C-TBN82XL037SALE
C-TBN82XL050SALE
C-TBN84XL025SALE
C-TBN84XL031SALE
C-TBN84XL037SALE
C-TBN84XL050SALE
C-TBN86XL025SALE
C-TBN86XL031SALE
C-TBN86XL037SALE
C-TBN86XL050SALE
C-TBN88XL025SALE
C-TBN88XL031SALE
C-TBN88XL037SALE
C-TBN88XL050SALE
C-TBN90XL025SALE
C-TBN90XL031SALE
C-TBN90XL037SALE
C-TBN90XL050SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngCore Wire Material Belt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

25,208 VND

21,427 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25152.430

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber7.90.31152.430

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37152.430

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber12.70.5152.430

25,208 VND

21,427 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber6.40.25157.4831

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31157.4831

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber9.50.37157.4831

25,214 VND

21,432 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber12.70.5157.4831

25,208 VND

21,427 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber6.40.25162.5632

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31162.5632

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37162.5632

25,219 VND

21,436 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber12.70.5162.5632

25,208 VND

21,427 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25172.7234

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber7.90.31172.7234

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37172.7234

25,219 VND

21,436 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber12.70.5172.7234

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber6.40.25177.835

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31177.835

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37177.835

25,219 VND

21,436 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber12.70.5177.835

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25182.8836

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31182.8836

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37182.8836

25,219 VND

21,436 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber12.70.5182.8836

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber6.40.25187.9637

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31187.9637

25,214 VND

21,432 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber9.50.37187.9637

25,219 VND

21,436 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber12.70.5187.9637

25,213 VND

21,431 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25193.0438

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31193.0438

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37193.0438

25,219 VND

21,436 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber12.70.5193.0438

25,211 VND

21,429 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25198.1239

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber7.90.31198.1239

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37198.1239

25,223 VND

21,440 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5198.1239

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25203.240

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber7.90.31203.240

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37203.240

25,223 VND

21,440 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber12.70.5203.240

25,211 VND

21,429 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25208.2841

25,214 VND

21,432 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber7.90.31208.2841

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37208.2841

25,223 VND

21,440 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5208.2841

25,211 VND

21,429 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber6.40.25213.3642

25,214 VND

21,432 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31213.3642

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37213.3642

25,226 VND

21,442 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber12.70.5213.3642

25,211 VND

21,429 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber6.40.25218.4443

25,214 VND

21,432 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber7.90.31218.4443

25,219 VND

21,436 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37218.4443

25,223 VND

21,440 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5218.4443

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25223.5244

25,214 VND

21,432 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber7.90.31223.5244

25,219 VND

21,436 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37223.5244

25,223 VND

21,440 VND

4 Piece(s) Available 10 Day(s) [Glass Fiber] Glass Fiber12.70.5223.5244

25,211 VND

21,429 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber6.40.25228.645

25,214 VND

21,432 VND

4 Piece(s) Available 12 Day(s) [Glass Fiber] Glass Fiber7.90.31228.645

25,219 VND

21,436 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber9.50.37228.645

25,223 VND

21,440 VND

1 Piece(s) Available Same day [Glass Fiber] Glass Fiber12.70.5228.645

Loading...Tải…

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Shape Closed End Belt Tooth Surface Standard (Single Sided) Belt Material Rubber Belt
Belt Type XL Belt Shape Type Trapezoidal Tooth Profile Circular Type Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.