2525 / 2550, Slot Width 6mm Aluminum Frames
:
MISUMI
- Economy Series Profiles, with different cross-sectional shapes and groove width sizes, can only be matched with Economy Series special accessories starting with L.
- For some items with length over 2800mm, please email to "machinery_bd@misumi.com.vn" to check ability to supply.
This is an economy item, The price is cheaper than the MISUMI standard product.
Product overview
Domestic universal European standard aluminum profile with 6 mm groove width and side lengths of 2525 and 2550.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Aluminum profile for assembly lines is a structural material that takes advantage of the excellent workability of aluminum alloy, using molds to extrude cylindrical aluminum ingots into shape.
Widely used in assembly line workbenches, FA automation equipment frames, covers, display columns, carts, and other applications.
Product feature
1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Dimensional drawing
 Material |  Surface treatment |
| 6063-T5 | Clear anodized |
Specification table
| Part Number |
| LCF6-2525-1000 |
Type ( Type) |  Profile cross-section |  Total length L | Weight kg/m | Cross-sectional moment of inertia | |||
| Fixed type | Specified type | Fixed type | Specified type | Lx (cm4) | Ly (cm4) | ||
| KLCF6 | LCF6 | 2525 | 4000 | 50–4000 (specified unit 0.5 mm) | 0.79 | 0.72 | 0.72 |
| 2550 | 1.42 | 3.1 | 12.4 | ||||
Application example
■ Used for equipment frames
Precaution
1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
Alteration
Various alterations are available, including 45° miter cutting, end face tapping, wrench hole, counterbored hole, whistle hole, and more.
Various alterations are available, including 45° miter cutting, end face tapping, wrench hole, counterbored hole, whistle hole, and more.
| Alteration name | Example of alteration code | Specification drawing | Machining content / corresponding accessory |
| End face tapping (center hole) | LTP/RTP/TPW |  | Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt |
| 45-degree cutting | L□T45/R□T45 |  | 45-degree angle cutting |
| Open wrench hole at fixed position | LWP/RWP |  | Concealed connection Accessories used for this alteration: Cup head bolt |
| Drill countersunk hole at specified position | Z6/XA |  | Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt |
| S hole | LSH/RSH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection) |
| M hole | LMH/RMH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection) |
Related product
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy European standard 40 series aluminum profile, groove width 8 mm | Economy single side tabbed bracket, special for aluminum profile | Economy PVC plate, polyvinyl chloride plate, straight |
 |  |  |