Ball Plungers Flanged

·This series products are Economy type flanged Ball Plungers from MISUMI, which are manufactured in China, and can be widely used in low and medium precision equipment and tooling and fixtures.
·Ball Plungers, also known as ball point set screws, ball screws, positioning balls, touch balls, steel ball tightening spring screws, etc., can be used for temporary positioning and index adjustment of workpieces, relying on the spring to push out the front ball through a fixed stroke.

·A wide variety of specifications is available to accommodate different sizes, lengths and loads.
·Made entirely of stainless steel, with no painting or coloring, they are suitable for more equipment with higher surface requirements.
·As there is no wrench slot on the tip, please use the Ball Plungers with an Allen wrench.
·The Ball Plungers has a simple structure: the front ball is pushed out through a fixed stroke by the internal spring and it can be released by pressing in the ball against the elastic force.
·Flexible installation: Suitable for linear motion and rotary motion mechanisms with positioning requirements, the plunger can be installed using general threads, which facilitates assembly and disassembly.
·Suitable for fixture indexing, positioning, stop limit and other occasions.
·The Ball Plungers stroke can be fine-tuned by screwing-in depth of the screw.

Example Use of Ball Plungers

When installed on a thin plate, the Ball Plungers can be tightened using a nut.

·The values of stroke (S), slot size (B) and load are for reference only and not guaranteed.
·Ball Plungers, No anti-loosening treatment.