2040 / 2060 / 2080, Slot Width 6mm Aluminum Frames
:
MISUMI
- Economy Series Profiles, with different cross-sectional shapes and groove width sizes, can only be matched with Economy Series special accessories starting with L.
- Length from 50mm up to 6000mm is available with type LCF6-2040. Please refer to this page.
>> 【Special Page for LCF8-2040 in Vietnam】 - For some items with length over 2800mm, please email to "machinery_bd@misumi.com.vn" to check ability to supply.
This is an economy item, The price is cheaper than the MISUMI standard product.
Product overview
European standard economy series new product, with a different cross-sectional shape, can only be used with European standard economy series special accessories starting with 'L'.
20 series aluminum profile with 6 mm groove width and side length, available with 2 or more column grooves.
Suitable for the structure of small type hoods and display columns.
Available in 2-row slot, 3-row slot, and 4-row slot options.
20 series aluminum profile with 6 mm groove width and side length, available with 2 or more column grooves.
Suitable for the structure of small type hoods and display columns.
Available in 2-row slot, 3-row slot, and 4-row slot options.
Product feature
1. Complies with the GB industrial aluminum profile standard, with 8 to 10μ clear anodized surface for scratch resistance.
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
2. A protective film is applied to the profile surface to prevent bumps and friction during transportation.
3. Free cutting to any specified length in 0.5 mm units within the range of 50 mm to 4000 mm.
4. Supports various alterations such as drilling and bevel cutting.
5. The European standard economy series profile product has a different profile cross-section shape compared to MISUMI's existing products. The specification comparison is as follows:
Dimensional drawing
| Type | Profile type |  Material |  Surface treatment | |
| Fixed type | Specified type | |||
| KLCF6 | LCF6 | Standard | 6063-T5 | Clear anodized |
| KLCFB6 | LCFB6 | Black | Black anodizing | |
Specification table
Any length from 50 to 4000 mm can be freely cut in increments of the specified unit 0.5 mm at no additional charge.| Part Number |
| LCF6-2040-1000 |
Type ( Type) |  Profile cross-section |  Total length L | Profile type | Weight kg/m | Cross-sectional moment of inertia | |||
| Fixed type | Specified type | Fixed type | Specified type | Lx (cm4) | Ly (cm4) | |||
| KLCF6 | LCF6 | 2040 | 4000 | 50–4000 (specified unit 0.5 mm) | Standard | 0.84 | 4.64 | 1.42 |
| KLCFB6 | LCFB6 | 2040 | Black | |||||
| KLCF6 | LCF6 | 2060 | Standard | 1.19 | 14.64 | 1.92 | ||
| KLCF6 | LCF6 | 2080 | Standard | 1.54 | 32.29 | 2.39 | ||
Alteration
Various alterations are available, including 45° bevel cutting, end face tapping, wrench hole, counterbored hole, whistle hole, and more.
Precaution
1. The profile surface is covered with a protective film. Due to adhesion from the glue, a small amount of aluminum debris may remain. This is not a quality problem, and all aluminum debris will be removed once the protective film is taken off.
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
2. European standard aluminum alloy profiles and MISUMI's existing Japanese material aluminum profile accessories are not compatible. It is recommended to use the economical European standard accessories starting with 'L':
Alteration
| Alteration name | Example of alteration code | Specification drawing | Machining content / corresponding accessory |
| End face tapping (center hole) Catalog link Dimension information | LTP/RTP/TPW |  | Threaded holes machined on the end of the aluminum profile Accessories used for this alteration: Cup head bolt |
| 45-degree cutting Catalog link Dimension information | L□T45/R□T45 |  | 45-degree angle cutting |
| Open wrench hole at fixed position Catalog link Dimension information | LWP/RWP |  | Concealed connection Accessories used for this alteration: Cup head bolt |
| Drill countersunk hole at specified position Catalog link Dimension information | Z8/XA |  | Drill a counterbored hole at any specified position on the left end face Accessories used for this alteration: Cup head bolt |
| S hole Catalog Size information | LSH/RSH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Whistle (built-in connection) |
| M hole Catalog Size information | LMH/RMH |  | Drill S hole at fixed position starting from the left end face Accessories used for this alteration: Riveted connector (internal connection) |
Application example
Related product
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy European standard 40 series aluminum profile, groove width 8 mm | Economy single side tabbed bracket, special for aluminum profile | Economy PVC plate, polyvinyl chloride plate, straight |
 |  |  |