6060, Slot Width 10mm Aluminum Frames
:
MISUMI
- Economy Series Profiles, with different cross-sectional shapes and groove width sizes, can only be matched with Economy Series special accessories starting with L.
- For some items with length over 2800mm, please email to "machinery_bd@misumi.com.vn" to check ability to supply.
This is an economy item, The price is cheaper than the MISUMI standard product.
Product Overview
Slot width 10mm Square 6060 Profile.
Dimensional Drawing
 Material |  Surface Treatment |
| 6063-T5 | Clear Anodize |
Specification Table
■Specified Length
Maximum selectable length can be checked on configure bar on the left.
| Type | Profile | Overall Length L mm | Profile Type | Mass kg/m | Cross Sectional Moment of inertia | Collective Moment of inertia | Recommend bracket and accessories 1 | Recommend bracket and accessories 2 | ||||||
| ℓx（cm4） | ℓy（cm4） | Zx（cm4） | Zy（cm4） | Standard Bracket | Bolt for Bracket | Nut | Heavy Bracket | Bolt for Heavy Bracket | Nut | |||||
| LCF10 | 6060 | 50-2000 (25000) | Standard | 3.82 | 45.02 | 45.02 | 15 | 15 | LBSBL10-4545** | E-GSCB8-18 | LNHRN10-45-8** | LBL5050-45** | E-GSCB8-18 | LNHRN10-45-8** |
| LCFL10 | Light | 2.43 | 29.2 | 29.2 | 9.73 | 9.73 | ||||||||
Maximum selectable length can be checked on configure bar on the left.Note:
* Length and Mass Weight in () only available in Vietnam
** The recommend accessories use 4545 series bracket, please check design carefully
* Length and Mass Weight in () only available in Vietnam
** The recommend accessories use 4545 series bracket, please check design carefully
Alterations
| Alteration | Alteration Symbol | Specification | Machining/Corresponding Accessories |
| End Tapping (Center Hole) | LTP/RTP/TPW |  | Tapping holes on the end face of aluminum profiles Parts used for this additional processing: Button Head Screws |
| 45-Degree Cutting | L□T45/R□T45 |  | Cutting with 45-degree angle. |
| Drilling Wrench Hole | LWP/RWP |  | Drilling Wrench holes in fixed positions for Blind joint connections. Parts used for this additional processing: Button Head Screws |
| Counterboring | Z8/XA |  | Machining Counterbored holes at any specified positions. Parts used for this additional processing: Button Head Screws |
| S Hole Blind Joint Dedicated | LSH/RSH |  | Adding S holes for Pre-Assembly Insertion Double Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Double Joint Kits |
| M Hole Blind Joint Dedicated | LMH/RMH |  | Adding M holes for Post- Assembly Insertion Double Joints,Center Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Center Joint Kits |
Product Features
1.Implement the GB industrial aluminum profile standard, 8~10μ anodized treatment, the surface is scratch-resistant.
2.A protective film is attached to the surface of the profile to prevent friction and damage during transportation.
3.Any length can be specified within the range of 50mm~2000(2500) for cutting.
4.Compatible with various alterations such as drilling and chamfering.
5.Economy Series profiles are different from Misumi’s existing profile cross-sectional shape, and the specifications are compared as follows:
2.A protective film is attached to the surface of the profile to prevent friction and damage during transportation.
3.Any length can be specified within the range of 50mm~2000(2500) for cutting.
4.Compatible with various alterations such as drilling and chamfering.
5.Economy Series profiles are different from Misumi’s existing profile cross-sectional shape, and the specifications are compared as follows:
Example of Use
Precautions
1.The surface of the profile is covered with a protective film, and there may be a small amount of aluminum chips remaining, which is not a quality problem.
After the film is removed, the aluminum chips will be removed.
2.Economy series products are different from MISUMI existing profiles in section shapes, so they can only be used with Economy series special accessories starting with L.
After the film is removed, the aluminum chips will be removed.
2.Economy series products are different from MISUMI existing profiles in section shapes, so they can only be used with Economy series special accessories starting with L.
Related Products
▪ Aluminum frame accessories:
| Product Name | Bracket | Heavy Load Bracket | Blind Joint | Ball Spring Nut | Leaf Spring Nut | Frame Cap | Groove Cover | U Slot Cover |
| Photo |  |  |  |  |  |  |  |  |
| Link | LBSBL | LBL | LBIS | LNHRN | LNTRNM | LCEC | LMCSG | LMUSB |