5050 / 50100, Slot Width 8mm Aluminum Frames
:
MISUMI
- Economy Series Profiles, with different cross-sectional shapes and groove width sizes, can only be matched with Economy Series special accessories starting with L.
- For length from 4m, it may take 2days for delivery. Please contact cs@misumi.com.vn for further support
This is an economy item, The price is cheaper than the MISUMI standard product.
Product Overview
Economy Series Aluminum Frames has different cross-sectional shapes and can only be used with Economy Series special accessories starting with L.Slot width 8mm ,side length 50 series aluminum alloy profiles. It is suitable for frame combinations such as covers, stands, shelves, etc. of large structures.
Dimensional Drawing
Material Specification
| Part No. |  Material |  Surface Treatment |
| LCF8-5050 | 6063-T5 | Clear Anodize |
| LCF8-50100 | Clear Anodize |
Specification Table
■Specified Length| Type | Profile | Overall Length L | Mass kg/m | Cross Sectional Moment of inertia | Recommend bracket and accessories 1 | Recommend bracket and accessories 2 | |||||
| lx（cm4） | ly（cm4） | Standard Bracket | Bolt | Nut | Heavy load bracket | Bolt | Nut | ||||
| LCF8 | 5050 | 50 - 2000 (6000*) | 2.51 (2.437)* | 25.81 | 25.81 | LBSB8-4040** | E-GSCB8-15 | LNTRNM8-40-8 (Leaft spring nut) | LBL5050-40** | E-GSCB8-18 | LNTRNM8-40-8 (Leaft spring nut) |
| 50100 | 50 - 2000 (6000*) | 4.24 (4.126)* | 191.09 | 51.21 | LBL7878-100 (Width 100) | ||||||
Maximum selectable length can be checked on configure bar on the left.*Length and Mass in brackets is only available in Vietnam
** This series is use with 4040 series bracket and leaf spring nut, please check your design carefully.
Alterations
| Alteration | Alteration Symbol | Specification | Machining/Corresponding Accessories |
| End Tapping (Center Hole) | LTP/RTP/TPW |  | Tapping holes on the end face of aluminum profiles Parts used for this additional processing: Button Head Screws |
| 45-Degree Cutting | L□T45/R□T45 |  | Cutting with 45-degree angle. |
| Drilling Wrench Hole | LWP/RWP |  | Drilling Wrench holes in fixed positions for Blind joint connections. Parts used for this additional processing: Button Head Screws Joint Screw Plates |
| Counterboring | Z8/XA |  | Machining Counterbored holes at any specified positions. Parts used for this additional processing: Button Head Screws |
| S Hole Blind Joint Dedicated | LSH/RSH |  | Adding S holes for Pre-Assembly Insertion Double Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Double Joint Kits |
| M Hole Blind Joint Dedicated | LMH/RMH |  | Adding M holes for Post- Assembly Insertion Double Joints,Center Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Center Joint Kits |
For alteration of threaded hole, 45° cuts, wrench hole, and counterbore hole, please refer to
P.39～44.Product Features
1.Implement the GB industrial aluminum profile standard, 8~10μ anodized treatment, the surface is scratch-resistant.2.A protective film is attached to the surface of the profile to prevent friction and damage during transportation
3.Any length can be specified within the range of 50mm~2000(2500) for cutting.
4.It corresponds to various secondary operations such as drilling and bevel cutting.
5.Economy Series Aluminum Frames are different from Misumi’s existing profile cross-sectional shape. The specifications are compared as follows:
Example of Use
Related Products
▪ Aluminum frame accessories:
| Product name | Bracket | Heavy load bracket | Blind Joint | Leaf spring nut | Frame cap | Groove cover | U-Shape Groove cover |
| Photo |  |  |  |  |  |  |  |
| Link | LBSB | LBL | LBIS | LNTRNM | LCEC | LMCSG | LMUSB |