120120 , Slot Width 8mm Aluminum Frames
:
MISUMI
- Economy Series Profiles, with different cross-sectional shapes and groove width sizes, can only be matched with Economy Series special accessories starting with L.
- For some items with length over 2800mm, please email to "machinery_bd@misumi.com.vn" to check ability to supply.
This is an economy item, The price is cheaper than the MISUMI standard product.
Product Overview
Slot width 8mm Squeare 120 Series ProfileDimensional Drawing
 Material |  Surface Treatment |
| 6063-T5 | Clear Anodize |
Specification Table
| Type | Profile | Overall Length L | Mass kg/m | Cross Sectional Moment of inertia | Collective Moment of inertia | Recommend bracket and accessories | ||||
| ℓx（cm4） | ℓy（cm4） | Zx（cm4） | Zy（cm4） | Heavy Bracket | Bolt for Heavy Bracket | Nut | ||||
| LCF8 | 120120 | 50～2000(2500) | 15.22 | 781 | 781 | 130.16 | 130.16 | LBL7878-120 | E-GSCB8-18 | LNHRN8-40-8 |
Alterations
| Alteration | Alteration Code | Specification | Machining/Corresponding Accessories |
| End Tapping (Center Hole) | LTP/RTP/TPW |  | Tapping holes on the end face of aluminum profiles Parts used for this additional processing: Button Head Screws |
| 45-Degree Cutting | L□T45/R□T45 |  | Cutting with 45-degree angle. |
| Drilling Wrench Hole | LWP/RWP |  | Drilling Wrench holes in fixed positions for Blind joint connections. Parts used for this additional processing: Button Head Screws Joint Screw Plates |
| Counterboring | Z8/XA |  | Machining Counterbored holes at any specified positions. Parts used for this additional processing: Button Head Screws |
| S Hole Blind Joint Dedicated | LSH/RSH |  | Adding S holes for Pre-Assembly Insertion Double Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Double Joint Kits |
| M Hole Blind Joint Dedicated | LMH/RMH |  | Adding M holes for Post- Assembly Insertion Double Joints,Center Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Center Joint Kits |
For alteration of threaded hole, 45° cuts, wrench hole, and counterbore hole, please refer to
P.39～44.Product Features
1.Implement the GB industrial aluminum profile standard, 8~10μ anodized treatment, the surface is scratch-resistant.
2.A protective film is attached to the surface of the profile to prevent friction and damage during transportation.
3.Any length can be specified within the range of 50mm~2000(2500) for cutting.
4.Compatible with various alterations such as drilling and chamfering.
5.Economy Series profiles are different from Misumi’s existing profile cross-sectional shape, and the specifications are compared as follows:
2.A protective film is attached to the surface of the profile to prevent friction and damage during transportation.
3.Any length can be specified within the range of 50mm~2000(2500) for cutting.
4.Compatible with various alterations such as drilling and chamfering.
5.Economy Series profiles are different from Misumi’s existing profile cross-sectional shape, and the specifications are compared as follows:
Example of Use
Related Products
▪ Aluminum frame accessories:
| Product Name | Heavy Load Bracket | Blind Joint | Ball Spring Nut | Leaf Spring Nut | Groove Cover | U Slot Cover |
| Photo |  |  |  |  |  |  |
| Link | LBL | LBIS | LNHRN | LNTRNM | LMCSG | LMUSB |