6060 / 6090 / 6630 , Slot Width 8mm Aluminum Frames
:
MISUMI
- Economy Series Profiles, with different cross-sectional shapes and groove width sizes, can only be matched with Economy Series special accessories starting with L.
- For some items with length over 2800mm, please email to "machinery_bd@misumi.com.vn" to check ability to supply.
This is an economy item, The price is cheaper than the MISUMI standard product.
Product Overview
Economy series aluminum profiles with a groove width of 8mm, and a side length of 60mm.
Suitable for the structure of medium equipment hoods, cabinets and display bars.
Standard 6060, 6090 and Curved(Arc) 6030 are available.
Economy series products are different from MISUMI existing profiles in section shapes, so they can only be used with Economy series special accessories starting with L.
* For length from 4m, it may take 2days for delivery. Please contact cs@misumi.com.vn for further support
Suitable for the structure of medium equipment hoods, cabinets and display bars.
Standard 6060, 6090 and Curved(Arc) 6030 are available.
Economy series products are different from MISUMI existing profiles in section shapes, so they can only be used with Economy series special accessories starting with L.
* For length from 4m, it may take 2days for delivery. Please contact cs@misumi.com.vn for further support
Dimensional Drawing
bb_Drawing.jpg)
| Part Number | Profile Type | Material | Surface Treatment |
| LCF8-6060 | Standard | 6030-T5 | Clear Anodize |
| LCF8-6090 | Standard | ||
| LCF8-6630 | Curved |
Specifications Table
Order Example:
The specifications table contains information such as the specified length range, unit, as well as meter weight and inertial intercept.
Maximum selectable length can be checked on configure bar on the left.
As it is a low cost and Economy series product, there may be small scars and defects on the surface. If you have higher requirements for the surface and end face, please select well.
( | – |
LCF8 – 6060 | – 800 |
The specifications table contains information such as the specified length range, unit, as well as meter weight and inertial intercept.
 Type |  Profile |  Overall Length L | Mass Weight kg/m | Cross Sectional Moment of inertia | Collective Moment of inertia | Recommend bracket and accessories 1 | Recommend bracket and accessories 2 | ||||||
ℓx（cm4） | ℓy（cm4） | Zx（cm4） | Zy（cm4） | Standard Bracket | Bolt for Bracket | Nut | Heavy Bracket | Bolt for Heavy Bracket | Nut | ||||
| LCF8 | 6060 | 50～2000(6000)* | 2.35(2.285)* | 32.4 | 32.4 | 10.8 | 10.8 | LBSB8-6060 | E-GSCB8-12 | LNHRN8-30-8 | LCNBL6060-90 | E-GSCB8-15 | LNHRN8-30-8 |
| 6090 | 50～2000(6000)* | 3.82(3.716)* | 102.77 | 49.85 | 22.86 | 16.61 | LBSB8-6060** | LNHRN8-30-6** | LBL7878-60 | ||||
| 6630 | 50～2000(2500) | 2.81 | 23.26 | 23.26 | 8.85 | 8.85 | LBSBL8-3030 | E-GSCB6-12 | LNHRN8-30-6 | LBL5050-30 | |||
Maximum selectable length can be checked on configure bar on the left.As it is a low cost and Economy series product, there may be small scars and defects on the surface. If you have higher requirements for the surface and end face, please select well.Note:
* Length and Mass Weight in () only available in Vietnam
** The recommend accessories use 6060 series bracket, please check design carefully
Dimension Tolerance (mm)* Length and Mass Weight in () only available in Vietnam
** The recommend accessories use 6060 series bracket, please check design carefully
0 - 10 | ± 0.2 |
10 - 25 | ± 0.25 |
25 - 38 | ± 0.3 |
18 - 50 | ± 0.4 |
50 - 100 | ± 0.6 |
100 - 180 | ± 0.85 |
> 180 | ± 1.00 |
Alterations
 | Part No. | - | L | - | （LTP·RTP·TPW） |
| LCF8－3030 | - | 1000 | - | LTP |
| Alteration | Code | Specification | Machining/Corresponding Accessories |
| End Tapping (Center Hole) | LTP/RTP/TPW |  | Tapping holes on the end face of aluminum profiles Parts used for this additional processing: Button Head Screws |
| 45-Degree Cutting | L□T45/R□T45 |  | Cutting with 45-degree angle. |
| Drilling Wrench Hole | LWP/RWP |  | Drilling Wrench holes in fixed positions for Blind joint connections. Parts used for this additional processing: Button Head Screws |
| Counter boring | Z8/XA |  | Machining Counterbored holes at any specified positions. Parts used for this additional processing: Button Head Screws |
| S Hole Blind Joint Dedicated Holes | LSH/RSH |  | Adding S holes for Pre-Assembly Insertion Double Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Double Joint Kits |
| M Hole Blind Joint Dedicated Holes | LMH/RMH |  | Adding M holes for Post- Assembly Insertion Double Joints,Center Joint connections. Parts used for this additional processing: Blind Joints, Pre-Assembly Insertion Center Joint Kits |
Product Features
[Features]
The product has abundant specifications and types, high quality and low price, and exquisite in appearance.
[Intended Use]
Suitable for the structure of small hoods, cabinets and display bars.
The product has abundant specifications and types, high quality and low price, and exquisite in appearance.
[Intended Use]
Suitable for the structure of small hoods, cabinets and display bars.
Example of Use
With 3030 series profiles, small frames, hoods, racks and other modules can be easily completed for automation equipment.
Related Products
▪ Aluminum frame accessories:
| Product Name | Bracket | Heavy Load Bracket | Blind Joint | Ball Spring Nut | Leaf Spring Nut | Frame Cap | Groove Cover | U Slot Cover |
| Photo |  |  |  |  |  ; |  |  |  |
| Part Number | LBSB | LBL | LBIS | LNHRN | LNTRNM | LCEC | LMCSG | LMUSB |