5 Series Aluminum Frame - 20x60mm/20x80mm, 6mm Slot Width

MISUMI

Additional freight and delivery charge are added to items longer than 2000.1mm

Aluminum Frame 5 Series/ Slot width 6/ 20x60 mm. and 20x80mm.
Aluminium Profile is a device used to build machine structures, available in various sizes,cross section shapes and with different types of surfaces treatment to choose from.
[Feature]
● Shape : Rectangle.
● Slot width : 6 mm.
● Cross-section : have 2 types
- 20 mm. X 60 mm.
number of width slot = 1 slot
number of length slot = 3 slots
- 20 mm. X 80 mm.
number of width slot = 1 slot
number of length slot = 4 slots
● Overall length :The size is configurable between 50 to 4000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6N01SS-T5 and A6063S-T5
● Surface treatment: Clear Anodize
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.
See more ...

Khung nhôm định hình dòng 5/chiều rộng rãnh 6/20x60mm. và 20x80mm.
Khung nhôm định hình là một thiết bị được sử dụng để chế tạo các cấu trúc máy, sản phẩm có nhiều kích thước, hình dạng mặt cắt và nhiều loại xử lý bề mặt khác nhau cho phép người dùng có thể lựa chọn.
[Đặc tính sản phẩm]
● Hình dạng: Hình chữ nhật
● Chiều rộng rãnh: 6 mm.
● Tiết diện mặt cắt : có hai loại
-20 mm. X 60 mm.
số lượng rãnh có trên cạnh chiều rộng = 1 rãnh
số lượng rãnh có trên cạnh chiều dài = 3 rãnh
-20 mm. X 80 mm.
số lượng rãnh có trên cạnh chiều rộng = 1 rãnh
số lượng rãnh có trên cạnh chiều dài = 4 rãnh
● Tổng chiều dài: Kích thước có thể được chọn trong khoảng từ 50 đến 4000 mm, và chiều dài tối thiểu mỗi lần tăng thêm là 0.5 mm
● Vật liệu: Nhôm loại A6N01SS-T5 và A6063S-T5
● Xử lý bề mặt: Mạ Anode trắng
[Ứng dụng]
Sản phẩm được sử dụng cho các kết cấu máy tự động trong nhiều ngành công nghiệp khác nhau như công nghiệp ô tô, công nghiệp điện tử, ...

Misumi Việt Nam cung cấp nhôm định hình 20x60, nhôm định hình 20x80. Nhiều dòng sản phẩm thông dụng, thường thấy trong các giải pháp sản xuất: Nhôm định hình 10x10, nhôm định hình 15x15, nhôm định hình 1515, nhôm định hình 20x100, nhôm định hình 15x30, nhôm định hình 15x60, nhôm định hình 30x150, nhôm định hình 90x90, nhôm định hình 10x20, nhôm định hình 14x25, nhôm định hình 16x40, nhôm định hình 200x200, nhôm định hình 30x50, nhôm định hình 60x30, nhôm định hình 80x40, giá nhôm định hình 40x40, nhôm định hình, thanh nhôm định hình, khung nhôm định hình, nhôm thanh định hình, các loại nhôm định hình, kích thước nhôm định hình, nhôm định hình giá rẻ.

Dimensional Drawing of Aluminum Frames

HFS (standard type)
Aluminum Frames

*No tolerance is specified for fixed length frames.

■5 Series: Groove width 6±0.30mm, suitable for M5 bolts.
[ ! ]No surface treatment is applied to cut surfaces or additionally machined areas.
[ ! ]Aluminum Frames, If an end tap is specified, it will be machined in the red circle.

5 Series

For information regarding dimensional tolerances,

Groove details
(common to all series)

Groove bottom details
(HFS, CAF, HFSY types)

Enlarged view of part A

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Model Aluminum Frames	−	L
HFS5-2060	−	800

type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	HFS5-2 060	50 to 4000	1.26	464	1.97× ¹⁰⁴	15.98× ¹⁰⁴
HFS	A6005CSS-T5	White anodized aluminum	HFS 5-2080	50 to 4000	1.64	605	2.56× ¹⁰⁴	36× ¹⁰⁴

[ ! ]Aluminum Frames, If you require non-anodized or black anodized aluminum with a length of 6000 mm,

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)

[ ! ]Aluminum Frames, Fixed-length frames have a format with K at the beginning of the format code for each frame.

Model Aluminum Frames	−	L
KHFS5-2080	−	4000

type	Material	Surface Treatment	Model	Lmm (No tolerance specified *1 )	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	Lmm (No tolerance specified *1 )	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	KHF S5-2060	4000	464	1.97× ¹⁰⁴	15.98× ¹⁰⁴
HFS	A6005CSS-T5	White anodized aluminum	KHFS5-2080	4000	605	2.56× ¹⁰⁴	36× ¹⁰⁴

[ ! ] *1Aluminum Frames, An effective length of 4000 mm means that the frame has an effective length of 4000 mm or more that can actually beused.
The actual size including the gripping allowance will be 4000 mm or more (it will be several tens of mm longer).
As fixed length frames are frames that are cut by the customer, the exact length cannot be specified.

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

[ ! ]Aluminum Frames, By using the various alterations listed below, MISUMI's specified length aluminum frames allow for greater flexibilityin assembling structures.
Some frames are not applicable depending on the type and size. Please check the price list listed on each alterationpage to see if the alteration is applicable.
Aluminum Frames, Items marked with "-" in the price list are not applicable.

classification	Additional Work name	Alteration code example	Content
End face tapping	End face tap (center hole)	LTP/RTP/TPW LHP/RHP/HPW	Tap the frame. M5, depth 15: LTP/RTP/TPW M3, depth 6 (with helical insert): LHP/RHP/HPW Blind joints ( screw joints / simple joints ) that require this processing
Change cutting method	High-precision cutting	SC	Aluminum Frames, The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precision cutting. *Only applicable to L≦1500
Change cutting method	45 degree cut	L□T45 R□T45	The cut is made at a 45-degree angle. 45-degree cuts cannot be specified in the same direction with other alterations. Example: HFS6-3030-500- L TP- LAT45 ⇒ ✖ (alterations in the same direction (left)) HFS6-3030-500- L TP- RAT45 ⇒ 〇 (separate alterations on left and right) [ ! ]If you would like to cut at an angle other than 45 degrees, please contact our catalog non-standard product service .
Wrench Drilling	Fixed position wrench hole	LCH/LCV/LCP RCH/RCV/RCP	Aluminum Frames, This additional processing is required to drill a wrench hole (φ7.35) to match the position of the tap on the endface of the mating frame when fastening a blind joint that assembles frames into an L shape. Blind joints that require this processing ( screw joints / single joints / tapping joints )
	Hole position shifted by the thickness of the frame cap	FL FR	Aluminum Frames, The hole position for the additional fixed position wrench hole is moved by the thickness of the frame cap (3mm). This prevents the frame cap from protruding when assembled at a corner.
	Wrench holes at specified positions	AH/BH/CH/DH/EH AV/BV/CV/DV/EV AP/BP/CP/DP/EP	Aluminum Frames, This is an additional process to drill wrench holes (φ7.35) at any desired position. It can be used whenfastening blind joints at locations other than the frame end. ・ Up to five holes can be drilled in each of the horizontal, vertical, and cross directions. [!] If you require six or more wrench holes, please contact our non-standard product service .
Counterbore Drilling	Specified position counterbored hole	Z5-XA○○ Z6-YA○○	Aluminum Frames, This is an additional process to drill a counterbore hole (selectable from Z5 or Z6) at any position. ・Z5: Through hole φ5.5, counterbore hole φ9.5, Z6: Through hole φ6.5, counterbore hole φ11 . ・Up to five holes can be drilled in one direction. ・For frames with multiple rows of grooves on one surface, counterbore holes will be machined in all grooves. [ ! ]If you require more than six counterbore holes or to change the direction of the counterbore holes, please contact our non-standard product service .
Drilling holes specifically for blind joints	M hole	LMH/LMV RMH/RMV	Drills holes required for connecting post-assembly double joints and center joints. ( Post-assembly double joints / center joints )
Drilling holes specifically for blind joints	L hole	JLP○○-H△ KLP○○-H△	Drill holes required for connecting parallel joints. ( Parallel joints )
Other processing	C-chamfered end	CW	The outer periphery of the frame end face is chamfered.
Other processing	Sticking stickers	ZZZ	Aluminum Frames, A sticker printed with the catalog number etc. is attached to the aluminum frame. There are restrictions on the number of characters etc., but it is also possible to print the customer's serialnumber and unit number.

5 Series Related Parts of Aluminum Frames

■Aluminum Frames accessories

Product name	bracket	Blind Joint	nut	Frame cap	Groove cover
photograph
Product page	Here	Here	Here	Here	Here

■Aluminum Frames, List of compatible frame caps

Frame model number	Compatible frame caps
	Product Type		color	Thickness	Model number	Number of uses
The same applies to the HFS5-2060 fixed length frame (model number starting with K).		Cap stopper	black	2.5	HFC5-2060-B	1
			Light gray	2.5	HFC5-2060-S	1
The same applies to HFS5-2080 fixed length frames (model numbers starting with K).		Cap stopper	black	2.5	HFC5-2040-B	2
			Light gray	2.5	HFC5-2040-S	2

Selection Support Information of Aluminum Frames

■Frame connection methodsFrame of Aluminum Frames
connection methods can be broadly divided into the following two types.

	bracket	Blind Joint
Connection example
Features	- Connects outside the frame - Can be moved to any position - Not aesthetically pleasing	・Connects inside the frame ・Aesthetically pleasing ・Requires processing of the frame

■Additional end face tapping (5 series 20 x 60, 20 x 80) of Aluminum Frames
Center section (3 holes, 4 holes) (no corner sections)

Size and Position	left	Right side	both sides	cross section
M5 depth 15	LTP	RTP	TPW
M3 depth 6 (helisert inserted)	LHP	RHP	HPW
Tap position

■How to think about the allowable guideline load (deflection) for Aluminum Frames
[!]Aluminum Frames, The allowable guideline load is the load that causes the frame to deflect within 1 mm per 1000 mm of length.
Deflection exceeding this will not cause damage, but it should be considered the maximum practical deflection.(The allowable guideline deflection is proportional to the length. For example, 500 mm = 0.5 mm, 2000 mm = 2 mm.)Please refer to
or for your reference.
Aluminum Frames

Type Overview of Aluminum Frames

		Standard aluminum frame			Lightweight aluminum frame		High-rigidity aluminum frame
		HFS Type	EFS type	NFS (NEFS) type	HFSL type	NFSL type	GFS type	GNFS type

Cross-sectional photo
Material		A6005CSS-T5	A6005CSS-T5	A6063S-T5	A6005CSS-T5	A6063S-T5	A6061SS-T6 equivalent	A6063S-T6 equivalent
Features		Standard cross-sectional shape.	Aluminum Frames, This frame maintains the same rigidity as the HFS series while achieving lighter weight and lower cost.	A significant price reduction has been achieved by changing the material. Strength (*) is the same as the HFSand EFS series.	Aluminum Frames, This frame is designed to be lightweight and inexpensive. It is suitable for situations where lightweight andinexpensiveness are prioritized over strength.	By changing the material from HFSL, we have achieved a further price reduction. Strength (*) is the same as theHFSL series.	A thick frame that is designed for high rigidity, suitable for enclosures that are subject to high loads.	Aluminum Frames, A significant price reduction has been achieved by changing the material of the load-bearing and rigid frame.Strength (*) is the same as the GFS series.
Surface Treatment		White anodized , black anodized , clear coated , baked finish (yellow)	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum	White anodized aluminum	White anodized aluminum
Compatible Series	5	○	-	○	-	-	-	-
	6		○		○	○	○	○
	8
	8-45