Urethane Sheets, Adhesives for Urethane - Square, Band

MISUMI

Please check the content on our website as the PDF does not contain the most up-to-date information.
The product is not suitable for machining. If customers want to machine complicated shape, please make prior confirmation with Misumi

・For the free specification type, A and B dimensions can now be selected up to 800.

Dimensional Drawing

■A Dimension Fixed Type
Square Type

■Dimension Configurable
Band Type

Band Type

[ ! ] For Adhesive Type, the adhesive tape may tear from the body.
Please use it as temporary fixing, or in combination with bolt fixing.
[ ! ] Heat resistant temperature for seals is 80℃.

■Accuracy Standards

T Tolerance

T	Tolerance
0.5	+/- 0.2
1 to 4	+/- 0.3
5 to 10	+/- 0.4
15 to 30	+/- 0.5

A, L Tolerance

A, L	Tolerance
200 or Less	+/- 0.5
201 to 300	+/- 1.0
301 to 400	+/- 1.2
401 to 500	+/- 1.5

[ ! ] L dimension tolerance applies only to Dimension Configurable Type

Hole Machining Details

N
(Through Hole)

Z
(Counterbored Hole)

Bolt Nominal Diameter	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	12
d₁	6.5	8	9.5	11	14	17.5
h	3.5	4.5	5.5	6.5	9	11

ZN
(Extra Low Head
Counterbored Hole)

Bolt Nominal Diameter	3	4	5	6
d	3.5	4.5	5.5	6.5
d₁	7	9	10	11
h	1.5	2	2.5	2.5

[ ! ] ZN is compatible with hex socket extra low head cap bolt.

■A/B Dimensions Configurable Type
Standard type

Hole Type

-1 Hole- 1H

-2 Holes- 2H

-3 Holes- 3H

-4 Holes- 4H

-6 Holes- 6H

■Accuracy Standards

T Tolerance

T	Tolerance
0.5	+/- 0.2
1 to 4	+/- 0.3
5 to 10	+/- 0.4
15 to 30	+/- 0.5

A/B Tolerance

A/B	Tolerance
200 or Less	+/- 0.5
201 to 300	+/- 1.0
301 to 400	+/- 1.2
401 to 500	+/- 1.5
501 to 800	+/- 5

Hole Machining Details

N
(Through Hole)

Z
(Counterbored Hole)

Bolt Nominal Diameter	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	12
d₁	6.5	8	9.5	11	14	-
h	3.5	4.5	5.5	6.5	9	-

ZN
(Extra Low Head
Counterbored Hole)

Bolt Nominal Diameter	3	4	5	6
d	3.5	4.5	5.5	6.5
d₁	7	9	10	11
h	1.5	2	2.5	2.5

[ ! ] ZN is compatible with hex socket extra low head cap bolt.

Product Specifications

Type	Type		[ M ] Material	[ H ] Hardness	Color
Type	No Adhesive	Adhesive	[ M ] Material	[ H ] Hardness	Color
Square Type Band Type	UTSN	UTSNA	Ether Type Polyurethane	Shore A95	Natural Color
	UTHN	UTHNA	Ether Type Polyurethane	Shore A90
	UTM	UTMA	Ester Type Polyurethane	Shore A70
	UTL	UTLA	Ester Type Polyurethane	Shore A50
Band Type Dimension Configurable Hole Type	UTSNB	UTSNBA	Ether Type Polyurethane	Shore A95	Natural Color
	UTHNB	UTHNBA	Ether Type Polyurethane	Shore A90
	UTMB	UTMBA	Ester Type Polyurethane	Shore A70
	UTLB	UTLBA	Ester Type Polyurethane	Shore A50
A/B Dimensions Configurable Type	UTSSN	UTSSNA	Ether Type Polyurethane	Shore A95	Natural Color
	UTSHN	UTSHNA	Ether Type Polyurethane	Shore A90
	UTSM	UTSMA	Ester Type Polyurethane	Shore A70
	UTSL	UTSLA		Shore A50
	UTSLL	UTSLLA		Shore A30

Comparison of Chemical Resistance

	Urethane	Nitrile	Chloroprene	Ethylene	Butyl	Fluoro	Silicon	Low Elasticity
Gasoline Light Oil	○	○	○	×	×	◎	△ - ○	△
Water	△	◎	◎	◎	◎	◎	○	△
Strong Acid	×	○	○	○	◎	◎	△	△
Strong Alkali	×	○	◎	◎	◎	×	◎	○
Ether	×	× - △	× - △	○	△ - ○	× - △	× - △	△
Ketone	×	×	× - ○	◎	◎	×	○	×

◎ = Excellent, ○ = good, △ = Acceptable, × = not acceptable

[ ! ] The adhesive tape may tear from the body. Please use it as temporary fixing, or in combination with bolt fixing.
[ ! ] Heat resistant temperature for seals is 80℃.

Part Number Display

· A dimension fixed type

Part Number	-	A
UTHN8	-	300

· Band-Shaped, Dimension Configurable Hole Type

Part Number	-	A	-	L	-	P	-	H	-	Bolt Nominal Diameter
UTSNB5	-	25	-	500	-	P60	-	H5	-	Z3

· A/B Dimensions Configurable Type

Part Number	-	A	-	B	-	F	-	G	-	Bolt Nominal Diameter
UTSHN8 UTSHN4H8	- -	300 200	- -	200 150	-	F140	-	G120	-	N5

Specification Table

■Square Type

Part Number				A Selection
Type			T
No Adhesive UTSN UTHN UTM UTL	Adhesive UTSNA UTHNA UTMA UTLA	(Shore A90) (Shore A95) (Shore A70) (Shore A50)	(0.5)	100K 300 500
			1
			2
			3
			4
			5
			6
			8
			10
			15
			20
			25
			30

[ ! ] T (0.5) is available for UTHN and UTHNA only.
[ ! ] The A dimension of 100K is 100 mm.

■Band Type

Part Number				A Selection
Type			T
No Adhesive UTSN UTHN UTM UTL	Adhesive UTSNA UTHNA UTMA UTLA	(Shore A90) (Shore A95) (Shore A70) (Shore A50)	(0.5)	3 5 10 20 30 40 50 80 100
			1
			2
			3
			4
			5
			6
			8
			10

[ ! ] T (0.5) is available for UTHN and UTHNA only.
[ ! ] The length is 500 mm.
　

■Band type, Dimension Configurable Hole Type

Part Number			A 1 mm increments	L 1 mm increments	P 1 mm increments	H (Number of Holes)	Screw Hole Nominal Diameter Configurable
Type		T					N (Through Hole)	Z (Counterbored Hole)					ZN (Counterbored Hole Extra Low Head Cap Bolt)
No Adhesive UTSNB UTHNB UTMB UTLB	Adhesive UTSNBA UTHNBA UTMBA UTLBA	1	10 to 100	25 to 500	P ≥ 9	2 to 10	3 4 5 6 8 10	-					-
		2						-					-
		3						-					3	4
		4						-					3	4
		5						-					3	4	5	6
		6						-						4	5	6
		8						3						4	5	6
		10						3	4						5	6
		15							4	5	6	8	-

[ ! ] {L - P (H - 1)} /2 ≥ d₁ /2 + 2
　

■A/B Dimensions Configurable - Standard Type

Part Number				1 mm increments
Type			T	A	B
No Adhesive UTSSN UTSHN UTSM UTSL UTSLL	Adhesive UTSSNA UTSHNA UTSMA UTSLA UTSLLA	(Shore A90) (Shore A95) (Shore A70) (Shore A50) (Shore A32)	(0.5)	10to1,000	10to1,000
			1
			2
			3
			4
			5
			6
			8
			10
			15
			20
			25
			30

[ ! ] T (0.5) is available for UTSHN and UTSHNA.
[ ! ]A ≥ B ≥ T
　

■A/B Dimensions Configurable - Hole Type

Part Number					1 mm Increments (A ≥ B ≥ T)		0.5 mm Increments		Bolt Nominal Diameter Selection
Type			Nominal	T	A	B	F	G	N (Through Hole)	Z (Counterbored Hole)						ZN (Extra Low Head Counterbored Hole)
No Adhesive UTSSN UTSHN UTSM UTSL UTSLL	Adhesive UTSSNA UTSHNA UTSMA UTSLA UTSLLA	(Shore A90) (Shore A95) (Shore A70) (Shore A50) (Shore A32)	1H 2H 3H 4H 6H	(0.5)	25to800	25to800	5 to 795 (1H Type) 9 to 791 (2H, 4H Type) 9 to 545 (3H, 6H Type)	5 to 795 (1H, 2H, 3H Type) 9 to 791 (4H, 6H Type)	3 4 5 6 8 10	-						-
				1						-						-
				2						-						-
				3						-						3	4
				4						-						3	4
				5						-						3	4	5	6
				6						-							4	5	6
				8						3							4	5	6
				10						3	4							5	6
				15							4	5	6	8				5	6
				20							4	5	6	8		-
				25							4	5	6	8	10	-
				30							4	5	6	8	10	-

[ ! ] T (0.5) is available for UTSHN and UTSHNA. [ ! ]A ≥ B ≥ T
[ ! ]F Dimension specification range – 1H type selection: d (d₁) /2 + 2.5 ≤ F ≤ A - d (d₁) /2 - 2.5, when selecting 2H/4H Type: d (d₁) + 5 ≤ F ≤ A - d (d₁) - 5, when selecting 3H/6H Type: d (d₁) + 5 ≤ F ≤ A/2 - d (d₁) /2 - 2.5 is required. .
[ ! ] G dimension specification range: For 1H, 2H, 3H type selection: d (d₁) /2 + 2.5 ≤ G ≤ B - d (d₁) /2 - 2.5, for 4H, 6H type selection: d (d₁) + 5 ≤ G ≤ B - d (d₁) - 5 is required. (d for through holes, d₁ for counterbored holes.)
　

Alterations

[ ! ] Applicable to Band Type, Dimension Configurable Hole Type
　
　

Alterations Code	Alteration Details		Applicable Conditions	Alteration Examples
XC	Hole Position From Left End Face	XC = 1 mm increment	[ ! ]5 ≤ XC ≤ 486 [ ! ] d (d₁)/2 + 2 ≤ XC ≤ L - {Px (H - 1)} - d (d₁) - 2	UTSNB5-25-300-P50-H5-N5-XC65
YC	Hole Position From Bottom	YC = 1 mm increment	[ ! ]5 ≤ YC ≤ 86 [ ! ] d (d₁)/2 + 2 ≤ YC ≤ A - (H - 1) - d (d₁) - 2	UTSNB8-80-500-P60-H5-Z3-YC50

[ ! ] Applicable to A/B Dimensions Configurable Hole Type
　
　

Alterations Code	Alteration Details		Applicable Conditions	Alteration Examples
XC	Hole Position From Left End Face	XC = 1 mm increment	[ ! ]5 ≤ XC ≤ 486 [ ! ] (2H, 4H Type): d (d₁)/2 + 2.5 ≤ XC ≤ A-F-d (d₁)/2-2.5 [ ! ] (3H, 6H Type): d (d₁)/2 + 2.5 ≤ XC ≤ A-2F-d (d₁)/2-2.5	UTSHN4H8-200-150-F120-G100-N5-XC55
YC	Hole Position From Bottom	YC = 1 mm increment	[ ! ]5 ≤ YC ≤ 486 [ ! ] d (d₁)/2 + 2.5 ≤ YC ≤ B-G-d (d₁)/2-2.5	UTSM4H25-100-80-F60-G20-Z5-YC40

[ ! ] Applicable to A/B Dimensions Configurable Type
　
　

Alterations Code	Alteration Details		Applicable Conditions	Alteration Examples
CCA CCB CCC CCD	Corner Cut	Any corner can be cut. 5 ≤ Corner cut ≤ 20 (1 mm Increments) [Ordering Code] Example: When A and D are corner cut with C5 > > CCA5-CCD5	[ ! ] If you perform corner cuts at two or more places, straight sections should be 10 or more. [ ! ] For Adhesive Type, please specify with the adhesive side facing down. [ N/A ] Cannot be combined with circumference chamfering alteration. [ N/A ] T20, 25, and 30 cannot be specified. [ N/A ]A/B dimensions of 501 or higher are not selectable. [ N/A ] Square type, band type, and hole type cannot be specified.	UTSHN8-300-200-CCA5-CCC5
Bottom Surface: BCA BCB BCC BCD Top Surface: FCA FCB FCC FCD	Circumference Chamfering	Any C surface can undergo circumference chamfering. [Ordering Code] (Example) When cutting top surfaces A and C with circumference chamfering C5: BCA5-BCC5	[ ! ] 0.5 ≤ Circumference Chamfering ≤ 5 (0.5 mm increments) [ ! ] For chamfering on the same side, please specify the same dimensions. The top and bottom can be separated. [ N/A ] The bottom side cannot be specified for those with adhesive. [ N/A ] Cannot be combined with alteration of corner cut. [ N/A ] T0.5, 1, 20, 25, and 30 cannot be specified. [ ! ] T dimension must have straight part of 1 mm or more after cutting. (T- (Circumference Chamfering) ≥ 1) [ N/A ]A/B dimensions of 501 or higher are not selectable. [ N/A ] Square type, band type, and hole type cannot be specified.	UTSHN8-300-200-FCA2-FCC2

Features

Material	Features
Standard Urethane	Excels in strength in repeat use and shock-absorbing properties. Can be used for applications such as Mechanical Stoppers.
Ether Polyurethane / Ester Polyurethane	Ester Type is Hydrolytic. Do not use in humid and wet areas.
Antistatic Urethane	Excels in antistatic effect. Suitable when mechanical strength and antistatic properties are needed.
Heat Resistant Urethane	This urethane has up to 120℃ heat resistance. (Heat resistant temperature is 70 deg. for the standard urethane) Suitable for use in applications where high mechanical strength in high temperature range is required.
Super Abrasion Resistant Urethane (Vulkollan)	Vulkollan is a super abrasion resistant urethane which is far superior to conventional urethanes in abrasion resistance and load capacity. Excels in tearing strength. 6 times higher in abrasion resistance and 1.5 times in mechanical strength than the standard urethane.
Abrasion Resistant Urethane	A unique composition providing abrasion resistance 2.5 times that of standard urethane at a lower cost. Allows longer replacement intervals. Color is dark brown.
Ceramic Urethane	These MISUMI original urethane sheets contain a unique mixture of ceramic particles. Ceramic powder is effective against localized loads. Be aware that scraping this product may generate dust particles.
Nitrile Rubber (NBR)	Economical general-purpose rubber excellent in oil resistance. Used for various applications such as O-rings and gaskets.
Chloroprene Rubber (CR)	Well-balanced synthetic rubber with excellent weather resistance, heat resistance, oil and chemical resistance. Non-staining chloroprene rubber which minimizes contamination from contacting materials is also available.
Ethylene Rubber (EPDM)	Excels in weather, low temperature and chemical resistance. Can be used for general-purpose applications such as gaskets and doorstops.
Silicon Rubber (SI)	Excels in heat resistance and electric property (insulation). Physiologically safe and can be used for medical, food-related and electronic devices which require heat resistance.
Fluorine (FPM)	Expensive, but widely used due to its excellent heat resistance, oil resistance, solvent and chemical resistance. Has the highest resistance to ozone, heat resistance, oil resistance and chemical resistance of all rubbers.
Low Elasticity Rubber (HANENITE)	Excels in shock resistance and vibration absorbing characteristics and absorbs energy without rebound. Physical properties and durability are equal to general rubbers. Widely used as components for quiet and low-vibration products.
Butyl Rubber (IIR)	Although this product is sticky and not particularly oil resistant, it has excellent weather resistance, heat and low temperature resistance. This product is also water and chemical resistant, making it suitable for use in outdoor environments.

How to Use

Machining Information

About cutting rubber, sponge, and soundproofing materials

Basically, it is possible to cut with a utility knife or scissors.
The finish of the cut surface will vary depending on the material and hardness.
If it is adhesive, cut it with the seal side facing up.

When using scissors

For sponges smaller than C5, using scissors is recommended.

Standard Urethane Sheets, With Scissors-1

*It is easier to cut using larger scissors

Standard Urethane Sheets, With Scissors-2

[Cut Surface]

Standard Urethane Sheets, With Scissors-3

There may be marks from scissor blades in the cross-section view.