Square Shims - Slotted Hole
:
MISUMI
You can specify the outer diameter of the cutout hole in 1mm increments and the hole position in 0.1mm increments.
Machining Conditions of Slotted Hole Type
[ ! ] f≥3 [ ! ] a≥3
[ ! ] m≥3 [ ! ] n≥3
[ ! ] f≥3 [ ! ] a≥3
[ ! ] m≥3 [ ! ] n≥3
| Part Number | [ M ]Material | [ H ]Hardness | [ T ]Tolerance by Thickness | ||||||||||
| One Slot | Two Slots | Three Slots | 0.05 | 0.1 | 0.2 | 0.3 | 0.5 | 1.0 | 2.0 | 3.0 | |||
| ASAFR | ASFFR | ASCFR | SPCC Equivalent | - | - | ±0.03 | ±0.04 | ±0.06 | ±0.11 | ±0.17 | - | ||
| ASAFB | ASFFB | ASCFB | Brass (C2801P or C2680P) | - | ±0.005 | ±0.02 | ±0.03 | ±0.04 | ±0.05 | ±0.08 | ±0.12 | ±0.15 | |
| ASAFS | ASFFS | ASCFS | T=0.05~1.0 T=2.0, 3.0 | SUS304H SUS304 | 370~430HV - | ±0.005 | ±0.02 | ±0.03 | ±0.035 | ±0.04 | ±0.05 | ±0.20 | ±0.25 |