Bushings for Locating Pins - Configurable, Straight, Standard / Thin Wall
:
MISUMI
This is a shoulder type bushing for positioning pins. Custom dimensions are available.
■Standard
[ ! ]
■Thin-wall type
[ ! ]
■Standard
[!] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
■Thin-wall type
[!] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
| [M] Material | [S] Surface Treatment | [H] Hardness | Type | ||
| p6 | m6 | h7 | |||
| SKS3 Equivalent | — | 56 to 60HRC | JBAFP | JBAF | JBAFH |
| SKS3 Equivalent | Black Oxide | 56 to 60HRC | JBAFBP | JBAFB | JBAFBH |
| SKS3 Equivalent | Electroless Nickel Plating | 56 to 60HRC | JBAFMP | JBAFM | JBAFMH |
| SUS304 | — | — | JBAFSP | JBAFS | JBAFSH |
| SUS440C or 13Cr Stainless Steel | — | 50 to 55HRC | JBAFCP | JBAFC | JBAFCH |
■Thin-wall type
| [M] Material | [S] Surface Treatment | [H] Hardness | Type | ||
| p6 | m6 | h7 | |||
| SKS3 Equivalent | — | 56 to 60HRC | JBAUFP | JBAUF | JBAUFH |
| SKS3 Equivalent | Black Oxide | 56 to 60HRC | JBAUFBP | JBAUFB | JBAUFBH |
| SKS3 Equivalent | Electroless Nickel Plating | 56 to 60HRC | JBAUFMP | JBAUFM | JBAUFMH |
| SUS440C or 13Cr Stainless Steel | — | 50 to 55HRC | JBAUFCP | JBAUFC | JBAUFCH |