Height Adjusting Pins - Flat, Tip Set Screw - Threaded
:
MISUMI
With Wrench Flats. Locating is possible by attaching a pin on the tip or by Flat Tip adjustment.
[ ! ]The range of L dimension should be within 0.02 for same orders.
| [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Flat | Tip Set Screw Type | |
| Threaded | Threaded with Pilot | Threaded | |||
| ①S45C Equivalent | Black Oxide | - | STPAB | STPDB | SPFAB |
| ②S45C Equivalent | Hard Chrome Plating | Plating Hardness: 750HV ~ | STPAR | STPDR | - |
| ③S45C Equivalent | Black Oxide | Treated Hardness: 45 ~ 50HRC | STPAHB | STPDHB | - |
| ④S45C Equivalent | Hard Chrome Plating | Treated Hardness: 45 ~ 50HRC / Plating Hardness: 750HV ~ | STPAHR | STPDHR | - |
| ⑤SUS304 | - | - | STPASU | STPDSU | - |
| ⑥SUS440C or 13Cr stainless | - | Treated Hardness: 50 ~ 55HRC | STPAC | STPDC | - |