Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit
:
MISUMI
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.
● Press Fit
(Round) (Diamond) [ ! ]When D=P
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance. (2) Diamond Shape has a relief. When D<3
a＝0.5
d＝D－0.1 When D≥3
a＝1.0
d＝D－0.2 [ ! ]Relief dimension is a reference value.
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance. (2) Diamond Shape has a relief. When D<3
a＝0.5
d＝D－0.1 When D≥3
a＝1.0
d＝D－0.2 [ ! ]Relief dimension is a reference value.
[ ! ]Straight Sphere Type for which D=P is standardized is also available.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFQA | KFQD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC / Plating Hardness: 750HV ~ | GKFQA | GKFQD |
| (3) | SUS304 | - | - | SKFQA | SKFQD |
| (4) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV ~ | HKFQA | HKFQD |
| (5) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFQA | CKFQD |
| (7) | SKS3 Equivalent | Buffing | Treated Hardness: 60~63HRC | MKFQA | MKFQD |
| (8) | SKS3 Equivalent | Hard Chrome Plating + Buffing | Treated Hardness: 50~55HRC / Plating Hardness: 750HV ~ | MGKFQA | MGKFQD |