Locating Pins - Small Head, Round Tapered - Tapped
:
MISUMI
- Locating Pins - Small Head, Round Tapered – Tapped from MISUMI.
- Large Head, Tapered, with configurable dimensions for each part. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished and centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFTA | KFTD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFTA | GKFTD |
| (3) | SKS3 Equivalent | - | - | BKFTA | BKFTD |
| (4) | SUS304 | - | - | SKFTA | SKFTD |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV~ | HKFTA | HKFTD |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFTA | CKFTD |