Cam Follower / Solid Eccentric Cam Follower - Flat

MISUMI

[Specification Change] The materials, appearances, and packaging specifications of some products will be changed sequentially starting in December 2025. Please see here for details and applicable part numbers. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Since the stud head and shaft are eccentric to the center of the cam follower, it is possible to finely adjust the position by turning the stud. For order of 51 or more pieces, the price is reduced by 20%.

Solid Eccentric Cam Followers-With Hexagon Socket/Flat Type/With Seal/No Seal:Related Image

[ ! ]For d10 and smaller sizes, no grease replenishing hole is provided.
[ ! ]Operating Temp.: 80°C or lower

Shape	Type				[ M ]Material	[ A ]Accessories
	Hex Socket on Head (d6 ~ 10)		Hex Socket on Head and Thread (d12 ~ 16)
	No Seal	With Seal	No Seal	With Seal
Flat	CFAP	CFFAP	CFAPH	CFFAPH	SUJ2^*1	Hex Nut 1 pc. (S45C^*2, Black Oxide)

^*1 uses equivalent materials in some parts, and ^*2 uses steel for general structure in some parts. Please see here for details and applicable part numbers.

More Information

[ ! ]As the stud (d_h7) is eccentric to the center of the cam follower, it is possible to finely adjust the position by turning the stud when mounting.

Part Number Substitution Table for Cam Follower Standard Changes (d12, 16)

Seal	Material	Old Part Number (Hex Socket on Head)	New Part Number (Hex Socket on Head and Thread)
With Seal	SUJ2	CFFAP	CFFAPH
No Seal	SUJ2	CFAP	CFAPH