Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded
:
MISUMI
[Features]A shaft with a stepped male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.
| Type | [ M ]Material | [ H ]Hardness | [ S ] Surface Treatment | |||||
| One End Stepped and Threaded | Both Ends Stepped and Threaded | |||||||
| D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
| SFAF | SFUF | - | SFAX | SFUX | - | SUJ2 Equivalent | Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~ | - |
| SSFAF | SSFUF | - | SSFAX | SSFUX | - | SUS440C or 13Cr stainless | ||
| PSFAF | PSFUF | - | PSFAX | PSFUX | - | SUJ2 Equivalent | Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~ | |
| PSSFAF | PSSFUF | - | PSSFAX | PSSFUX | - | SUS440C or 13Cr stainless | ||
| RSFAF | - | - | RSFAX | - | - | SUJ2 Equivalent | Low Temp. Black Chrome Plating | |
| - | - | PSFGF | - | - | PSFGX | S45C Equivalent | - | Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~ |
| - | - | PSSFGF | - | - | PSSFGX | SUS304 | ||
[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ] Features of Low Temp. Black Chrome Plating p1_156
Example
