(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(472 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8,10]

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness B F Fine Thread [PMC] Fine Thread [PMS] P type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
ClearTrống
Heat Treatment
- Not Provided
- Induction Hardened
ClearTrống
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
ClearTrống
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
ClearTrống
Length L(mm)
[25-1498/1mm Unit(s)]
ClearTrống
Shaft Fit Tolerance
f8

g6

h5
ClearTrống
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
ClearTrống
B(mm)
0
[2-205/1mm Unit(s)]
ClearTrống
F(mm)
[2-210/1mm Unit(s)]
ClearTrống
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
ClearTrống
Fine Thread [PMS](mm)
10

12

14

18
ClearTrống
P(mm)
3

4

5

6

8

10

12

16

20

24

30
ClearTrống
type
- PSFAN
- PSFGN
- PSFUN
- PSSFAN
- PSSFGN
- PSSFUN
- RSFAN
- SFAN
- SFUN
- SSFAN
- SSFUN
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

3 Day(s) or Less

6 Day(s) or Less

9 Day(s) or Less

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Linear Shafts-One End Threaded (Part Number)

Name: Linear Shafts-One End Threaded
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8,10]

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8,10]

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMS10

RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]

RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]

RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]

RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]

RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]

RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]

RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]

RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12,15]

RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]

RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]

RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15]

RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]

RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]

RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15,17]

RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14,18]

RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,8,10,12,16,20]

RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,8,10,12,15,17,20]

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8,10]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features]A shaft with a male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Type			[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFAN	SFUN	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAN	SSFUN	-	SUS440C or 13Cr stainless		-
PSFAN	PSFUN	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAN	PSSFUN	-	SUS440C or 13Cr stainless
RSFAN	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGN	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGN	SUS304	-

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Features of Low Temp. Black Chrome Plating p1_142
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141

Specifications

Part Number	-	L	-	F	-	B	-	P
SFAN12	-	500	-	F20	-	B15	-	P6
SFUN8	-	150	-	F20	-	B15	-	P6

Part Number			1mm Increment			P Selection											D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P Selection											g6	h5	f8	(Y)Max.	R	C
(D Tol. g6) SFAN SSFAN PSFAN PSSFAN (D Tol. f8) PSFGN (D≥6) PSSFGN (D≥6)	(D Tol. h5) SFUN SSFUN PSFUN PSSFUN	4	25~ 298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3											-0.004 -0.012	0 -0.005	-	300	0.2 or Less	0.2 or Less
		5	25~ 398			3	4										-0.004 -0.012	0 -0.005	-	400	0.2 or Less	0.2 or Less
		6	25~ 798			3	4	5									-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~ 998			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 998				4	5	6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1198					5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1198					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1198					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1498									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1498										16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

[ ! ]For O.D. tolerance f8 type, D needs to be 6 or more.

Part Number		1mm Increment			P Selection										D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P Selection										g6	(Y)Max.	R	C
(D Tol. g6) Low Temp. Black Chrome Plating RSFAN	4	25~298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 [ ! ]B≥Pitchx3	3										-0.004 -0.012	300	0.2 or Less	0.2 or Less
	5	25~398			3	4									-0.004 -0.012	400	0.2 or Less	0.2 or Less
	6	25~500			3	4	5								-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Coarse Thread Dimension
M	pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8,10]
RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8,10]
RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMS10
RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]
RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]
RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]
RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]
RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]
RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]
RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]
RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12,15]
RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]
RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]
RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15]
RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]
RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]
RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15,17]
RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14,18]
RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,8,10,12,16,20]
RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,8,10,12,15,17,20]
RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMS[10,12,14,18]
RSFAN25-[25-500/1]-F[2-120/1]-B[2-120/1]-P[8,10,12,16,20,24]
RSFAN25-[25-500/1]-F[2-120/1]-B[2-120/1]-PMC[8,10,12,15,17,20,25]
RSFAN25-[25-500/1]-F[2-120/1]-B[2-120/1]-PMS[10,12,14,18]
RSFAN30-[25-500/1]-F[2-150/1]-B[2-150/1]-P[8,10,12,16,20,24,30]
RSFAN30-[25-500/1]-F[2-150/1]-B[2-150/1]-PMC[8,10,12,15,17,20,25,30]
RSFAN30-[25-500/1]-F[2-150/1]-B[2-150/1]-PMS[10,12,14,18]
SFAN4-[25-298/1]-F[2-28/1]-B[2-28/1]-P3
SFAN4-[25-298/1]-F[2-28/1]-B[2-28/1]-PMC3
SFAN5-[25-398/1]-F[2-35/1]-B[2-35/1]-P[3,4]
SFAN5-[25-398/1]-F[2-35/1]-B[2-35/1]-PMC[3,4,5]
SFAN6-[25-798/1]-F[2-42/1]-B[2-42/1]-P[3,4,5]
SFAN6-[25-798/1]-F[2-42/1]-B[2-42/1]-PMC[3,4,5]
SFAN8-[25-998/1]-F[2-56/1]-B[2-56/1]-P[3,4,5,6]
SFAN8-[25-998/1]-F[2-56/1]-B[2-56/1]-PMC[3,4,5,6]
SFAN10-[25-998/1]-F[2-70/1]-B[2-70/1]-P[4,5,6,8]
SFAN10-[25-998/1]-F[2-70/1]-B[2-70/1]-PMC[4,5,6,8]
SFAN10-[25-998/1]-F[2-70/1]-B[2-70/1]-PMS10
SFAN12-[25-1198/1]-F[2-84/1]-B[2-84/1]-P[5,6,8,10]
SFAN12-[25-1198/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10]
SFAN12-[25-1198/1]-F[2-84/1]-B[2-84/1]-PMS10
SFAN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-P[5,6,8,10,12]
SFAN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMC[5,6,8,10]
SFAN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]
SFAN15-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,6,8,10,12]
SFAN15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10,12,15]
SFAN15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,12,14]
SFAN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12]
SFAN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15]
SFAN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14]
SFAN18-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12,16]
SFAN18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15,17]
SFAN18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14,18]
SFAN20-[25-1198/1]-F[2-140/1]-B[2-135/1]-P[6,8,10,12,16]
SFAN20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMC[6,8,10,12,15,17]
SFAN20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMS[10,12,14,18]
SFAN25-[25-1198/1]-F[2-120/1]-B[2-163/1]-P[8,10,12,16,20,24]
SFAN25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMC[8,10,12,15,17,20,25]
SFAN25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMS[10,12,14,18]
SFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,10,12,16,20,24]
SFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,10,12,15,17,20,25,30]
SFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]
SFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[12,16,20,24,30]
SFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[12,15,17,20,25,30]
SFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[12,14,18]
SFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[16,20,24,30]
SFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[15,17,20,25,30]
SFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[14,18]
SFUN4-[25-298/1]-F[2-28/1]-B[2-28/1]-P3
SFUN4-[25-298/1]-F[2-28/1]-B[2-28/1]-PMC3
SFUN5-[25-398/1]-F[2-35/1]-B[2-35/1]-P[3,4]
SFUN5-[25-398/1]-F[2-35/1]-B[2-35/1]-PMC[3,4]
SFUN6-[25-898/1]-F[2-42/1]-B[2-42/1]-P[3,4,5]
SFUN6-[25-898/1]-F[2-42/1]-B[2-42/1]-PMC[3,4,5]
SFUN8-[25-1098/1]-F[2-56/1]-B[2-56/1]-P[3,4,5,6]
SFUN8-[25-1098/1]-F[2-56/1]-B[2-56/1]-PMC[3,4,5,6]
SFUN10-[25-1198/1]-F[2-70/1]-B[2-70/1]-P[3,4,5,6,8]
SFUN10-[25-1198/1]-F[2-70/1]-B[2-70/1]-PMC[4,5,6,8]
SFUN10-[25-1198/1]-F[2-70/1]-B[2-70/1]-PMS10
SFUN12-[25-1398/1]-F[2-84/1]-B[2-84/1]-P[3,4,5,6,8,10]
SFUN12-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10]
SFUN12-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMS[10,12]
SFUN13-[25-1398/1]-F[2-84/1]-B[2-79/1]-P[4,5,6,8,10,12]
SFUN13-[25-1398/1]-F[2-84/1]-B[2-79/1]-PMC[5,6,8,10]
SFUN13-[25-1398/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]
SFUN15-[25-1398/1]-F[2-84/1]-B[2-84/1]-P[4,5,6,8,10,12]
SFUN15-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10,12]
SFUN15-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMS[10,12,14]
SFUN16-[25-1398/1]-F[2-112/1]-B[2-107/1]-P[4,5,6,8,10,12]
SFUN16-[25-1398/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	P (mm)
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 50	2 ～ 50	-	-	4 ～ 10
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 50	2 ～ 50	4 ～ 10	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 50	2 ～ 50	-	10	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	-	-	5 ～ 12
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	5 ～ 12	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	-	10 ～ 12	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	-	-	5 ～ 12
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	5 ～ 12	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	-	10 ～ 12	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	-	-	5 ～ 12
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	5 ～ 15	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 60	2 ～ 60	-	10 ～ 14	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 80	2 ～ 80	-	-	5 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 80	2 ～ 80	5 ～ 15	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 80	2 ～ 80	-	10 ～ 14	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 80	2 ～ 80	-	-	5 ～ 16
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 80	2 ～ 80	5 ～ 17	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 80	2 ～ 80	-	10 ～ 18	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 100	2 ～ 100	-	-	6 ～ 20
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 100	2 ～ 100	6 ～ 20	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 100	2 ～ 100	-	10 ～ 18	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 120	2 ～ 120	-	-	8 ～ 24
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 120	2 ～ 120	8 ～ 25	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 120	2 ～ 120	-	10 ～ 18	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 150	2 ～ 150	-	-	8 ～ 30
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 150	2 ～ 150	8 ～ 30	-	-
-	1 Piece(s)	11 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 150	2 ～ 150	-	10 ～ 18	-
-	1 Piece(s)	9 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	4	25 ～ 298	g6	Induction Hardened (58HRC~)	0 ～ 28	2 ～ 28	-	-	3
-	1 Piece(s)	9 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	4	25 ～ 298	g6	Induction Hardened (58HRC~)	0 ～ 28	2 ～ 28	3	-	-
-	1 Piece(s)	9 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	5	25 ～ 398	g6	Induction Hardened (58HRC~)	0 ～ 35	2 ～ 35	-	-	3 ～ 4
-	1 Piece(s)	9 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	5	25 ～ 398	g6	Induction Hardened (58HRC~)	0 ～ 35	2 ～ 35	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	6	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 42	2 ～ 42	-	-	3 ～ 5
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	6	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 42	2 ～ 42	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 56	2 ～ 56	-	-	3 ～ 6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 56	2 ～ 56	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 70	2 ～ 70	-	-	4 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 70	2 ～ 70	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 70	2 ～ 70	-	10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 84	2 ～ 84	-	-	5 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 84	2 ～ 84	5 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 84	2 ～ 84	-	10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 79	2 ～ 84	-	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 79	2 ～ 84	5 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 79	2 ～ 84	-	10 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	2 ～ 84	-	-	5 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	2 ～ 84	5 ～ 15	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	2 ～ 84	-	10 ～ 14	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	2 ～ 112	-	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	2 ～ 112	5 ～ 15	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	2 ～ 112	-	10 ～ 14	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	2 ～ 112	-	-	5 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	2 ～ 112	5 ～ 17	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	2 ～ 112	-	10 ～ 18	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 135	2 ～ 140	-	-	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 135	2 ～ 140	6 ～ 17	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 135	2 ～ 140	-	10 ～ 18	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 163	2 ～ 120	-	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 163	2 ～ 120	8 ～ 25	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 163	2 ～ 120	-	10 ～ 18	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 205	2 ～ 210	-	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 205	2 ～ 210	8 ～ 30	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 205	2 ～ 210	-	10 ～ 18	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1498	g6	Induction Hardened (58HRC~)	2 ～ 205	2 ～ 210	-	-	12 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1498	g6	Induction Hardened (58HRC~)	2 ～ 205	2 ～ 210	12 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1498	g6	Induction Hardened (58HRC~)	2 ～ 205	2 ～ 210	-	12 ～ 18	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1498	g6	Induction Hardened (58HRC~)	2 ～ 205	2 ～ 210	-	-	16 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1498	g6	Induction Hardened (58HRC~)	2 ～ 205	2 ～ 210	15 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1498	g6	Induction Hardened (58HRC~)	2 ～ 205	2 ～ 210	-	14 ～ 18	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	4	25 ～ 298	h5	Induction Hardened (58HRC~)	2 ～ 28	2 ～ 28	-	-	3
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	4	25 ～ 298	h5	Induction Hardened (58HRC~)	2 ～ 28	2 ～ 28	3	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	5	25 ～ 398	h5	Induction Hardened (58HRC~)	2 ～ 35	2 ～ 35	-	-	3 ～ 4
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	5	25 ～ 398	h5	Induction Hardened (58HRC~)	2 ～ 35	2 ～ 35	3 ～ 4	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	6	25 ～ 898	h5	Induction Hardened (58HRC~)	2 ～ 42	2 ～ 42	-	-	3 ～ 5
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	6	25 ～ 898	h5	Induction Hardened (58HRC~)	2 ～ 42	2 ～ 42	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 1098	h5	Induction Hardened (58HRC~)	2 ～ 56	2 ～ 56	-	-	3 ～ 6
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 1098	h5	Induction Hardened (58HRC~)	2 ～ 56	2 ～ 56	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 1198	h5	Induction Hardened (58HRC~)	2 ～ 70	2 ～ 70	-	-	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 1198	h5	Induction Hardened (58HRC~)	2 ～ 70	2 ～ 70	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 1198	h5	Induction Hardened (58HRC~)	2 ～ 70	2 ～ 70	-	10	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 84	2 ～ 84	-	-	3 ～ 10
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 84	2 ～ 84	5 ～ 10	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 84	2 ～ 84	-	10 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 79	2 ～ 84	-	-	4 ～ 12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 79	2 ～ 84	5 ～ 10	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 79	2 ～ 84	-	10 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 84	2 ～ 84	-	-	4 ～ 12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 84	2 ～ 84	5 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 84	2 ～ 84	-	10 ～ 14	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 107	2 ～ 112	-	-	4 ～ 12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	2 ～ 107	2 ～ 112	5 ～ 15	-	-

Loading...Tải…

Product TOP

Basic InformationThông tin cơ bản

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	No Machining
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

B(mm)

F(mm)

Fine Thread [PMC](mm)

Fine Thread [PMS](mm)

P(mm)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Linear Shafts-One End Threaded (Part Number)

Copy Part Number URL to Clipboard

Product Description

Specifications

Alterations

Part Number

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều