(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(911 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

PSFGW6-[20-600/1]-M3-N3

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Change Tapped Thread M to Fine One [MSC] Change Tapped Thread N to Fine One [NSC] Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
ClearTrống
Heat Treatment
- Not Provided
- Induction Hardened
ClearTrống
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
ClearTrống
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
ClearTrống
Length L(mm)
[15-1500/1mm Unit(s)]
ClearTrống
Shaft Fit Tolerance
f8

g6

h5
ClearTrống
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
ClearTrống
Change Tapped Thread M to Fine One [MSC](mm)
8

10

12

14

18
ClearTrống
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
ClearTrống
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
ClearTrống
type
- PSFGW
- PSFJW
- PSFUW
- PSSFGW
- PSSFJW
- PSSFUW
- RSFJW
- SFJW
- SFUW
- SSFJW
- SSFUW
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

3 Day(s) or Less

5 Day(s) or Less

6 Day(s) or Less

7 Day(s) or Less

9 Day(s) or Less

13 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Linear Shafts-Both Ends Tapped

Name: Linear Shafts-Both Ends Tapped
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

PSFGW6-[20-600/1]-M3-N3

PSFGW8-[20-800/1]-M[3,4,5]-N[3,4,5]

PSFGW10-[20-800/1]-M[3,4,5,6]-N[3,4,5,6]

PSFGW10-[20-800/1]-M[3,4,5,6]-ND6

PSFGW10-[20-800/1]-MD6-N[3,4,5,6]

PSFGW10-[20-800/1]-MD6-ND6

PSFGW12-[20-1000/1]-M[4,5,6,8]-N[4,5,6,8]

PSFGW12-[20-1000/1]-M[4,5,6,8]-ND[6,8]

PSFGW12-[20-1000/1]-M[4,5,6,8]-NSC8

PSFGW12-[20-1000/1]-MD[6,8]-N[4,5,6,8]

PSFGW12-[20-1000/1]-MD[6,8]-ND[6,8]

PSFGW12-[20-1000/1]-MD[6,8]-NSC8

PSFGW12-[20-1000/1]-MSC8-N[4,5,6,8]

PSFGW12-[20-1000/1]-MSC8-ND[6,8]

PSFGW12-[20-1000/1]-MSC8-NSC8

PSFGW13-[25-1000/1]-M[4,5,6,8]-N[4,5,6,8]

PSFGW13-[25-1000/1]-M[4,5,6,8]-ND[6,8]

PSFGW13-[25-1000/1]-M[4,5,6,8]-NSC8

PSFGW13-[25-1000/1]-MD[6,8]-N[4,5,6,8]

PSFGW13-[25-1000/1]-MD[6,8]-ND[6,8]

PSFGW6-[20-600/1]-M3-N3

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] A shaft with female threads on both ends (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Type			[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFJW	SFUW	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFJW	SSFUW	-	SUS440C or 13Cr stainless		-
PSFJW	PSFUW	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJW	PSSFUW	-	SUS440C or 13Cr stainless
RSFJW	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGW	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGW	SUS304	-

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Full Length Hardness Guaranteed Shafts p1_155
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	M	-	N
SFJW8 SSFJW20	- -	200 500	- -	M4 M6	- -	N4 N10

Part Number			L 1mm Increments	M (Coarse), N (Coarse) Selection													D Tol.			C
Type		D	L 1mm Increments	M (Coarse), N (Coarse) Selection													g6	h5	f8	C
(D Tol. g6) SFJW SSFJW PSFJW PSSFJW (D Tol. f8) PSFGW PSSFGW	(D Tol. h5) SFUW SSFUW PSFUW PSSFUW	4	20~ 300	2													-0.004 -0.012	0 -0.005	-	0.2 or Less
		5	20~ 400		2.6	3											-0.004 -0.012	0 -0.005	-	0.2 or Less
		6	20~ 800			3											-0.004 -0.012	0 -0.005	-0.010 -0.028	0.5 or Less
		8	20~1000			3	4	5									-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		10	20~1000			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		12	20~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		13	25~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		15	25~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		16	30~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		18	30~1200				4	5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		20	30~1200				4	5	6	8	10	12					-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		25	35~1200				4	5	6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		30	35~1500						6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		35	35~1500							8	10	12	16	20	24		-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		40	50~1500								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		50	65~1500									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less

Part Number		L 1mm Increments	M (Coarse), N (Coarse) Selection											D Tol.	C
Type	D	L 1mm Increments	M (Coarse), N (Coarse) Selection											g6	C
(D Tol. g6) Low Temp. Black Chrome Plating RSFJW	4	20~300	2											-0.004 -0.012	0.2 or Less
	5	20~400		2.6	3									-0.004 -0.012	0.2 or Less
	6	20~500			3									-0.004 -0.012	0.5 or Less
	8	20~500			3	4	5							-0.005 -0.014	0.5 or Less
	10	20~500			3	4	5	6						-0.005 -0.014	0.5 or Less
	12	20~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	13	25~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	15	25~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	16	30~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	18	30~500				4	5	6	8	10	12			-0.006 -0.017	0.5 or Less
	20	30~500				4	5	6	8	10	12			-0.007 -0.020	1.0 or Less
	25	35~500				4	5	6	8	10	12	16		-0.007 -0.020	1.0 or Less
	30	35~500						6	8	10	12	16	20	-0.007 -0.020	1.0 or Less

[ ! ]L requires Mx2+Nx2≤L. [ ! ]When Mx2.5+4+Nx2.5+4≥L, tap pilot holes may go through and the effective length of the smaller tap part may be shortened.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
PSFGW6-[20-600/1]-M3-N3
PSFGW8-[20-800/1]-M[3,4,5]-N[3,4,5]
PSFGW10-[20-800/1]-M[3,4,5,6]-N[3,4,5,6]
PSFGW10-[20-800/1]-M[3,4,5,6]-ND6
PSFGW10-[20-800/1]-MD6-N[3,4,5,6]
PSFGW10-[20-800/1]-MD6-ND6
PSFGW12-[20-1000/1]-M[4,5,6,8]-N[4,5,6,8]
PSFGW12-[20-1000/1]-M[4,5,6,8]-ND[6,8]
PSFGW12-[20-1000/1]-M[4,5,6,8]-NSC8
PSFGW12-[20-1000/1]-MD[6,8]-N[4,5,6,8]
PSFGW12-[20-1000/1]-MD[6,8]-ND[6,8]
PSFGW12-[20-1000/1]-MD[6,8]-NSC8
PSFGW12-[20-1000/1]-MSC8-N[4,5,6,8]
PSFGW12-[20-1000/1]-MSC8-ND[6,8]
PSFGW12-[20-1000/1]-MSC8-NSC8
PSFGW13-[25-1000/1]-M[4,5,6,8]-N[4,5,6,8]
PSFGW13-[25-1000/1]-M[4,5,6,8]-ND[6,8]
PSFGW13-[25-1000/1]-M[4,5,6,8]-NSC8
PSFGW13-[25-1000/1]-MD[6,8]-N[4,5,6,8]
PSFGW13-[25-1000/1]-MD[6,8]-ND[6,8]
PSFGW13-[25-1000/1]-MD[6,8]-NSC8
PSFGW13-[25-1000/1]-MSC8-N[4,5,6,8]
PSFGW13-[25-1000/1]-MSC8-ND[6,8]
PSFGW13-[25-1000/1]-MSC8-NSC8
PSFGW15-[25-1000/1]-M[4,5,6,8,10]-N[4,5,6,8,10]
PSFGW15-[25-1000/1]-M[4,5,6,8,10]-ND[6,8,10]
PSFGW15-[25-1000/1]-M[4,5,6,8,10]-NSC[8,10]
PSFGW15-[25-1000/1]-MD[6,8,10]-N[4,5,6,8,10]
PSFGW15-[25-1000/1]-MD[6,8,10]-ND[6,8,10]
PSFGW15-[25-1000/1]-MD[6,8,10]-NSC[8,10]
PSFGW15-[25-1000/1]-MSC[8,10]-N[4,5,6,8,10]
PSFGW15-[25-1000/1]-MSC[8,10]-ND[6,8,10]
PSFGW15-[25-1000/1]-MSC[8,10]-NSC[8,10]
PSFGW16-[30-1200/1]-M[4,5,6,8,10]-N[4,5,6,8,10]
PSFGW16-[30-1200/1]-M[4,5,6,8,10]-ND[6,8,10]
PSFGW16-[30-1200/1]-M[4,5,6,8,10]-NSC[8,10]
PSFGW16-[30-1200/1]-MD[6,8,10]-N[4,5,6,8,10]
PSFGW16-[30-1200/1]-MD[6,8,10]-ND[6,8,10]
PSFGW16-[30-1200/1]-MD[6,8,10]-NSC[8,10]
PSFGW16-[30-1200/1]-MSC[8,10]-N[4,5,6,8,10]
PSFGW16-[30-1200/1]-MSC[8,10]-ND[6,8,10]
PSFGW16-[30-1200/1]-MSC[8,10]-NSC[8,10]
PSFGW18-[101-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFGW18-[101-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]
PSFGW18-[101-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12]
PSFGW18-[101-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]
PSFGW18-[101-1200/1]-MD[6,8,10,12]-ND[6,8,10,12]
PSFGW18-[101-1200/1]-MD[6,8,10,12]-NSC[8,10,12]
PSFGW18-[101-1200/1]-MSC[8,10,12]-N[4,5,6,8,10,12]
PSFGW18-[101-1200/1]-MSC[8,10,12]-ND[6,8,10,12]
PSFGW18-[101-1200/1]-MSC[8,10,12]-NSC[8,10,12]
PSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]
PSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]
PSFGW20-[30-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]
PSFGW20-[30-1200/1]-MD[6,8,10,12]-ND[6,8,10,12]
PSFGW20-[30-1200/1]-MD[6,8,10,12]-NSC[8,10,12,14]
PSFGW20-[30-1200/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12]
PSFGW20-[30-1200/1]-MSC[8,10,12,14]-ND[6,8,10,12]
PSFGW20-[30-1200/1]-MSC[8,10,12,14]-NSC[8,10,12,14]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Tapped Thread M to Fine One [MSC] (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	6	20 ～ 600	f8	No Induction Hardening	-	-	3	3	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	20 ～ 800	f8	No Induction Hardening	-	-	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 800	f8	No Induction Hardening	-	-	3 ～ 6	3 ～ 6	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 800	f8	No Induction Hardening	-	-	3 ～ 6	-	-	6
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 800	f8	No Induction Hardening	-	-	-	3 ～ 6	6	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 800	f8	No Induction Hardening	-	-	-	-	6	6
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	8	4 ～ 8	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	-	-	4 ～ 8	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	-	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	8	-	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	8	-	-	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	8	-	-	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	8	8	-	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	8	4 ～ 8	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	-	-	4 ～ 8	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	-	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	8	-	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	8	-	-	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	8	-	-	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	8	8	-	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	-	4 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	8 ～ 10	4 ～ 10	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	-	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	-	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	8 ～ 10	-	-	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	8 ～ 10	-	-	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	8 ～ 10	-	-	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	8 ～ 10	8 ～ 10	-	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 10	4 ～ 10	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	-	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	-	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 10	-	-	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	8 ～ 10	-	-	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	8 ～ 10	-	-	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	8 ～ 10	8 ～ 10	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	-	8 ～ 12	4 ～ 12	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	-	-	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	-	-	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	-	8 ～ 12	-	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	8 ～ 12	-	-	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	8 ～ 12	-	-	-	-	6 ～ 12
-	1 Piece(s)	6 Day(s) or more	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	101 ～ 1200	f8	No Induction Hardening	8 ～ 12	8 ～ 12	-	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	-	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 14	4 ～ 12	-	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	-	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	-	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	8 ～ 14	-	-	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	8 ～ 14	-	-	4 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	8 ～ 14	-	-	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	8 ～ 14	8 ～ 14	-	-	-	-

Loading...Tải…

Example

Product TOP

Basic InformationThông tin cơ bản

Basic Shape	Solid	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Change Tapped Thread M to Fine One [MSC](mm)

Change Tapped Thread N to Fine One [NSC](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Linear Shafts-Both Ends Tapped

Copy Part Number URL to Clipboard

Product Description

Specifications

Alterations

Part Number

Example

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều