Cam Follower - Hex Socket on Head and Thread, Crowned

MISUMI

[Specification Change] The materials, appearances, and packaging specifications of some products will be changed sequentially starting in December 2025. Please see here for details and applicable part numbers. Products before and after the change may be mixed in the same shipment, but there are no problems with use.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Hex socket and grease fitting are mounted on both the head and thread part. You can secure or lubricate it from either head or thread side.

Cam Follower - Hex Socket on Head and Thread, Crowned: Related Image

■With Seal

Cam Follower - Hex Socket on Head and Thread, Crowned: Related Image

[ ! ] Use THK Grease Gun Unit MG70 Attachment Type P when replenishing grease from the grease nipple.

■No Seal

Cam Follower - Hex Socket on Head and Thread, Crowned: Related Image

[ ! ] Operating Temp.: 80°C or lower

Type			[M] Material	[A] Accessory
Application	With Seal	No Seal	[M] Material	[A] Accessory
General	CFUH	CUH	SUJ2^*1	Hex Nut 1 pc. (S45C^*2, Black Oxide)
General	CFUSH	CUSH	SUS440C Equivalent	Hex Nut 1 pc. (SUS304)
Low Dust Generation	CFUCH	—	SUS440C Equivalent	Hex Nut 1 pc. (SUS304)
Heavy Load	CFUGH	—	SUJ2^*1	Hex Nut 1 pc. (S45C^*2, Black Oxide)

^*1 uses equivalent materials in some parts, and ^*2 uses steel for general structure in some parts. Please see here for details and applicable part numbers.