TPE Pad for Aluminum Frame - 5-6 Series Compatible
:
MISUMI
"Rubber Feet for Aluminum Extrusions. When mounting them, any alteration is not required."
Dimensional Drawing of Foot Bases for Aluminum Extrusions
HFPD5 -2020HFPD6 -3030[ M ] Material: TPE (thermoplastic elastomer)
Specification Table of Foot Bases for Aluminum Extrusions
| Model |
| HFPD 6-3030 |
・The price list below is currentas of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.
[ ! ]Foot Bases for Aluminum Extrusions, It can be used for aluminum frames except for the GFS series.
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Model | Foot Bases for Aluminum Extrusions | Mass (g) | |
| Type | No. | ||
| HFPD | 5 to 2020 | 5series 20mm square | 4 |
| 6 to 30 30 | 6series 30mm square | 9 | |
■ Foot Bases for Aluminum Extrusions Characteristic value
*1 JIS K 7215 Conductivity by Type D Durometers is used to compare the conductivity of other materials.
*2 According to JIS K 7113 [ ! ]The above Foot Bases for Aluminum Extrusions Characteristic value are standard values, not standard values, and guaranteed values.
*3 According to JIS K 7113
| Item | Unit | Number |
| Hardness *1 | Shore | D59 |
| Tensile strength *2 | Mpa | 19.9 |
| Compression permanent strain rate *3 | % | 28. |
| Volume-specific resistance | Ω・cm | 6.5×10 5 |
*2 According to JIS K 7113 [ ! ]The above Foot Bases for Aluminum Extrusions Characteristic value are standard values, not standard values, and guaranteed values.
*3 According to JIS K 7113
How to Use Foot Bases for Aluminum Extrusions
■ Features of Foot Bases for Aluminum Extrusions Characteristic value
・ Foot Bases for Aluminum Extrusions Characteristic value, A pad that can be attached directly to the end surface of the aluminum frame.
・ Foot Bases for Aluminum Extrusions Characteristic value, No additional taps are required on the edge of the aluminum frame.