Locating Pins - Tip Shape Selectable (Full Threaded)
:
MISUMI
- Locating Pins - Tip Shape Selectable (Full Threaded) from MISUMI.
- Screw-fitting type without pilot. Costs for hole machining on fixtures can be reduced.
- The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
- Provided 3 options for alteration, Wrench flat, Wrench hole (φ3.5 mm) or Hex socket machining.
- Any alteration cannot be combined with the other alteration.
Dimensional Drawing
Material | [M] Material | [S] Surface Treatment | [H] Hardness | P, B Configurable | P, B, ML Configurable |
No. | |||||
(1) | SKS3 Equivalent | — | Treated Hardness: 60 to 63 HRC | JPNG | JPNGL |
(2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50 HRC or more | GJPNG | GJPNGL |
Plating Hardness: HV750 or more | |||||
(3) | SKS3 Equivalent | — | — | BJPNG | BJPNGL |
(4) | SUS304 | — | — | SJPNG | SJPNGL |
| Tip Shape | |
| Shape A |  [ ! ]  |
| Shape B |  [!] ℓ2 = P-G 2tan30° Reference: 2tan30° ≒ 1.15 [ ! ] When G = P, add about C0.2 chamfering |
| Shape C |  [!] ℓ2 = P 2 ÷ tan30° +R- (R ÷ sin30°) Reference: tan30° ≒ 0.577, sin30° = 0.5 |