(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

?

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译 此翻譯是Google翻譯

Chat Start chat
  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/3 to 6:00 (ICT) 24/3/2025. We apologize for the inconvenience.
  • Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
  • Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(16 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

SFPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Insertion Guide Tip Type

    • Configure Image
      Tapered
    • Configure Image
      Spherical
    • Configure Image
      Flat

    ClearTrống

  • Locating Side Outer Dia. P (Ø)(mm)

     [1-3.5/0.1mm Unit(s)][1-3.5/0.01mm Unit(s)]

    ClearTrống

  • Locating Side O.D. Tolerance

    • 0/-0.01
    • 0.005/0
    • 0/-0.005
    • ±0.002

    ClearTrống

  • Mounting Section Length L(mm)

     [13-30/0.1mm Unit(s)][13-30/0.5mm Unit(s)]

    ClearTrống

  • Taper Length E(mm)

    • 0.5

     [0.5-2.5/0.5mm Unit(s)]

    ClearTrống

  • H(mm)

     [2-8/0.1mm Unit(s)]

    ClearTrống

  • T(mm)

     [3-5/0.1mm Unit(s)][3-5/1mm Unit(s)]

    ClearTrống

  • type

    • SFPZS□
    • SFSZS
    • SPPZS□
    • SPSZS
    • SXPZS□
    • SXSZS

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Small Diameter Locating Pin - with Shoulder Seat

Small Diameter Locating Pin - with Shoulder Seat
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
16 Part Numbers Available

SFPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]

SFPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]

SFPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]

SFSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]

SPPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]

SPPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]

SPPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]

SPSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]

SXPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E0.5

SXPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E[0.5-2.5/0.5]

SXPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E0.5

SXPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E[0.5-2.5/0.5]

SXPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E0.5

SXPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E[0.5-2.5/0.5]

SXSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]-E0.5

SXSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]-E[0.5-2.5/0.5]

SFPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
SFPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
  • Order Qty :
  • Price :
    ---
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

PDFP.1-1663-2014

Unit examples related to this product
Precision Visual Inspection Using Camera
View other unit examplesXem các ví dụ đơn vị khác
CAD Download
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Similar ProductsSimilar Products
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Product DetailProduct Detail

Product Description

- Small Diameter Locating Pin - with Shoulder Seat from MISUMI.
- Insertion Guide Tip Type can be selected into 4 types, Tapered tip, Spherical tip, and Flat tip.
- The outer diameter of the locating pin can be configurable from 1.0 to 3.5 mm.
- The shoulder part is provided to prevent pin extraction.
- The overall length of the product can be configurable from 13.0 mm to 30.0 mm.
- The material of locating pin is made of Stainless Steel SUS304.

Tip Shape Selectable

Flat

Sphere

Tapered

[M] Material[H] HardnessType
Standard ToleranceTolerance Selection
FlatSphereTaperedFlatSphereTapered
SK95 (SK4) Equivalent50 to 58HRCSFSZTSPSZTSXSZTSFPZTSPPZTSXPZT
SUS304—SFSZSSPSZSSXSZSSFPZSSPPZSSXPZS

Specification Table

◦ Standard Tolerance
Part Number—P—L—T—E 
SPSZS
SXSZS
SFSZT		—
—
—		P1.5
P2.5
P3.0		—
—
—		L18.5
L20.0
L25.0		—
—
—		T3
T4
T5
—
—
E1.5
E2.0		(Sphere)
(Tapered)
(Flat)

◦ Tolerance Selectable
Part Number—P—L—T—H—E 
 
Type P Tolerance
SPPZS
SXPZS
SFPZT		 P
Q
R		—
—
—		P1.55
P1.00
P2.55		—
—
—		L15.0
L19.0
L25.5		—
—
—		T3.2
T4.5
T4.5		—
—
—		H3.8
H2.5
H5.5		 
—
 
E0.5
 		(Sphere)
(Tapered)
(Flat)
■Standard Tolerance
Part NumberP
0.1 mm Increments		P Dimension
Tolerance		L
0.5 mm Increments		T
1 mm Increments		HE
0.5 mm Increments
TYPE
FlatSphereTapered1.0 to 1.3 0
-0.01		13.0 to 30.03 to 520.5
SFSZTSPSZTSXSZT1.4 to 2.540.5 to 1.5
SFSZSSPSZSSXSZS2.6 to 3.560.5 to 2.5
[ ! ] L - T ≥ 10 [ ! ] For Tapered, P ≥ E [ ! ] SUS304 products may not be polished.[ ! ] Taper R has been eliminated as it is non-standard

■Tolerance Selectable
Part NumberP
0.01 mm Increments		L
0.1 mm Increments		T
0.1 mm Increments		H
0.1 mm Increments		E
0.5 mm Increments
TYPEP Tolerance
Flat
SFPZT
SFPZS 		Sphere
SPPZT
SPPZS		Tapered
SXPZT
SXPZS		P+0.005
  0		1.00 to 1.4013.0 to 30.03.0 to 5.02.0 to 3.00.5
Q±0.0021.41 to 2.502.0 to 4.00.5 to 1.5
R  0
-0.005		2.51 to 3.503.0 to 8.00.5 to 2.5
[ ! ] L-T ≥ 10 [ ! ] P + 0.5 ≤ H [ ! ] For Tapered, P ≥ E [ ! ] SUS304 products may not be polished

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
Part Number
SFPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
SFPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
SFPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
SFSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]
SPPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
SPPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
SPPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]
SPSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]
SXPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E0.5
SXPZSP-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E[0.5-2.5/0.5]
SXPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E0.5
SXPZSQ-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E[0.5-2.5/0.5]
SXPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E0.5
SXPZSR-P[1-3.5/0.01]-L[13-30/0.1]-T[3-5/0.1]-H[2-8/0.1]-E[0.5-2.5/0.5]
SXSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]-E0.5
SXSZS-P[1-3.5/0.1]-L[13-30/0.5]-T[3-5/1]-E[0.5-2.5/0.5]
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngRoHSInsertion Guide Tip Type Locating Side Outer Dia. P (Ø)
(mm) 		Locating Side O.D. Tolerance Mounting Section Length L
(mm) 		Taper Length E
(mm) 		H
(mm) 		T
(mm)

-

1 Piece(s) 5 Day(s) or more 10Flat1 ～ 3.50.005/013 ～ 30-2 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Flat1 ～ 3.5±0.00213 ～ 30-2 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Flat1 ～ 3.50/-0.00513 ～ 30-2 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Flat1 ～ 3.50/-0.0113 ～ 30--3 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Spherical1 ～ 3.50.005/013 ～ 30-2 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Spherical1 ～ 3.5±0.00213 ～ 30-2 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Spherical1 ～ 3.50/-0.00513 ～ 30-2 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Spherical1 ～ 3.50/-0.0113 ～ 30--3 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.50.005/013 ～ 300.52 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.50.005/013 ～ 300.5 ～ 2.52 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.5±0.00213 ～ 300.52 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.5±0.00213 ～ 300.5 ～ 2.52 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.50/-0.00513 ～ 300.52 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.50/-0.00513 ～ 300.5 ～ 2.52 ～ 83 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.50/-0.0113 ～ 300.5-3 ～ 5

-

1 Piece(s) 5 Day(s) or more 10Tapered1 ～ 3.50/-0.0113 ～ 300.5 ～ 2.5-3 ～ 5
Part Number
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngRoHSInsertion Guide Tip Type Locating Side Outer Dia. P (Ø)
(mm) 		Locating Side O.D. Tolerance Mounting Section Length L
(mm) 		Taper Length E
(mm) 		H
(mm) 		T
(mm)

Loading...Tải…

  1. 1

App. Example

Shoulder is provided to prevent pin extraction.

Download (PDF)
Catalog (2 page view)
 

Basic InformationThông tin cơ bản

Basic Shape Small Head Insertion Guide Tip Shape Round Insertion Guide Specifications Not Provided
Mounting Side Shape Straight (Press-Fit) Surface Treatment Not Provided Heat Treatment Not Provided
Material SUS304

MISUMI Unit Example related to this product

Try to Find Other Examples

back next

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.

Close

Comparison list