Feed Pins - Solid - Press Fit

- Feed Pins - Solid - Press Fit from MISUMI.
- Length of tapered part can be specified depending on applications or environment. It is installed by press-fitting.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS304 feed Pins may not be polished and may have no centering hole.
- The outer diameter of the mounting part can be selectable from 2 mm to 10 mm.
- The outer diameter of the feed pin tip can be selectable from 2.5 mm to 13 mm.