Locating Pins - Tip Shape Selectable (Straight Tapped)
:
MISUMI
- Locating Pins - Tip Shape Selectable (Straight Tapped) from MISUMI.
- The tip shape is selectable from three types. To be mounted from back using bolts. Improved maintainability compared to the press fit type.
- The material of locating pin can be selected 4 types, S45C Equivalent, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless of round type and diamond type has an identification groove at any position on D part.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
● Round ● Straight ● Diamond a = 1.0
d = D - 0.2 [ ! ] Relief dimensions are reference values.
[ ! ] SUS304 products may not be polished and have no centering hole.
[ ! ] SUS440C or 13Cr Stainless Steel of Round and Diamond Types has an identification groove at any position on D part.
d = D - 0.2 [ ! ] Relief dimensions are reference values.
[ ! ] SUS304 products may not be polished and have no centering hole.
[ ! ] SUS440C or 13Cr Stainless Steel of Round and Diamond Types has an identification groove at any position on D part.
| Tip Shape | ||||
| A Config. | [ ! ]R ≥ P/2
| |||
| B Config. | [ ! ]G ≤ P  [!] ℓ2 = PG 2tan30° Reference: 2tan30° ≒ 1.15 [ ! ]When G = P, add about C0.2 chamfering | |||
| C Config. | [ ! ]R ≤ P/2 [!] ℓ3 = P 2 ÷ tan30° + R − (R ÷ sin30°) [!] Reference: tan30° ≒ 0.577, sin30° = 0.5 | |||
| Material No. | [M] Material | [S] Surface Treatment | [H] Hardness | Round | Diamond | Straight |
| (1) | SKS3 Equivalent | — | Treated Hardness: 55 to 60 HRC | LPGJ | LPDGJ | LPCJ |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treaded Hardness: 50 to 55 HRC Plating Hardness: 750 HV or more | LPGG | LPDGG | LPCG |
| (3) | S45C Equivalent | — | Treated Hardness: 45 to 50 HRC | LPG | LPDG | LPC |
| (4) | S45C Equivalent | Black Oxide | Treated Hardness: 45 to 50 HRC | LPGB | LPDGB | LPCB |
| (5) | S45C Equivalent | Hard Chrome Plating | Treated Hardness: 45 to 50 HRC Plating Hardness: 750 HV or more | LPGR | LPDGR | LPCR |
| (6) | SUS304 | — | — | LPGS | LPDGS | LPCS |
| (7) | SUS304 | Hard Chrome Plating | Plating Hardness: 750 HV or more | LPGD | — | LPCD |
| (8) | SUS440C or 13Cr Stainless Steel | — | Treaded Hardness: 50 to 55 HRC | LPGC | LPDGC | LPCC |