Locating Pins - Tip Shape Selectable (Threaded)
:
MISUMI
- Locating Pins - tip shape selectable (Threaded) from MISUMI.
- Insertion guide tip type can be selected 3 types, Tapered, Taper R, and Spherical.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
- A fully threaded type of L=0 without pivot is also available.
- Polished, centering hole is may not available for SUS304.
Dimensional Drawing
● Round
● Diamond
a = 1.0
d = D - 0.2
[ ! ] Relief dimensions are reference values.
[!] When L < Pitch × 2, the incomplete threaded portion (Pitch × 2) is included in M × 1.5.
[!] Fully Threaded Type of L = 0 w/o Pilot is available.
[ ! ] SUS304 products may not be polished and have no centering hole.
[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided on D part, unless the L dimension is short.
| Tip Shape | |
| A Config. |   [ ! ]R ≥ P/2 |
| B Config. |  [ ! ]G ≤ P [ ! ] When G = P, add about C0.2 chamfering |
| C Config. |  [ ! ]R ≤ P/2 Reference: tan30° ≒ 0.577, sin30° = 0.5 |
Materials Table
| Material No. | [M] Material | [S] Surface Treatment | [H] Hardness | P, L, B Configurable | P, L, B, ML Configurable | ||
| Round | Diamond | Round | Diamond | ||||
| (1) | SKS3 Equivalent | — | Treated Hardness: 55 to 60 HRC | LPAJ | LPDAJ | LPAJL | LPDAJL |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treaded Hardness: 50 to 55 HRC Plating Hardness: 750 HV or more | LPAG | LPDAG | LPAGL | LPDAGL |
| (3) | S45C Equivalent | — | Treated Hardness: 45 to 50 HRC | LPA | LPDA | LPANL | LPDAL |
| (4) | S45C Equivalent | Black Oxide | Treated Hardness: 45 to 50 HRC | LPAB | LPDAB | LPABL | LPDABL |
| (5) | S45C Equivalent | Hard Chrome Plating | Treated Hardness: 45 to 50 HRC Plating Hardness: 750 HV or more | LPAR | LPDAR | LPARL | LPDARL |
| (6) | SUS304 | — | — | LPAS | LPDAS | LPASL | LPDASL |
| (7) | SUS304 | Hard Chrome Plating | Plating Hardness: 750 HV or more | LPAD | LPDAD | LPADL | LPDADL |
| (8) | SUS440C or 13Cr Stainless Steel | — | Treated Hardness: 50 to 55 HRC | LPAC | — | LPACL | — |