Locating Pins - Tip Shape Selectable (Press Fit)
:
MISUMI
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
- Locating Pins - Tip Shape Selectable (Press Fit) from MISUMI.
- The tip shape is selectable from three types, Tapered (A), Taper R (B), Spherical (C). Highly customizable with each dimension configurable. Press Fit.
- The material of pin can be selected 4 types, steel SKS3 Equivalent, S45C, stainless steel SUS304, SUS440C or 13Cr stainless.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
● Round ● Diamond When D < 3
a = 0.5
d = D - 0.1
[ ! ] Relief dimension is a reference value. When D ≥ 3
a = 1.0
d = D - 0.2
a = 0.5
d = D - 0.1
[ ! ] Relief dimension is a reference value. When D ≥ 3
a = 1.0
d = D - 0.2
[ ! ] SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ] Polishing and centering hole may not be provided.
[ ! ] Polishing and centering hole may not be provided.
| Tip Shape | |||
| A Shape | 
| ||
| B Shape |  [ ! ] ℓ2 = P-G 2tan30° Reference: 2tan30° ≈ 1.15 [ ! ]G ≤ P [ ! ] When G = P, add about C0.2 chamfering. | ||
| C Shape |  [ ! ] ℓ3 = P 2 / tan30° + R − (R / sin30°) [ ! ]R ≤ P/2 [ ! ] Reference: tan30° ≈ 0.577 sin30° = 0.5 | ||
| Material No. | [M] Material | [S] Surface Treatment | [H] Hardness | Round | Diamond | |
| D dim. Tolerance m6 | D dim. Tolerance p6 | D dim. Tolerance m6 | ||||
| (1) | SKS3 Equivalent | — | Treated Hardness: 55~60HRC | LPEJ | LPPEJ | LPDEJ |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | LPEG | LPPEG | LPDEG |
| (3) | S45C Equivalent | — | Treated Hardness: 45~50HRC | LPE | LPPE | LPDE |
| (4) | S45C Equivalent | Black Oxide | Treated Hardness: 45~50HRC | LPEB | LPPEB | LPDEB |
| (5) | S45C Equivalent | Hard Chrome Plating | Treated Hardness: 45~50HRC Plating Hardness: 750HV~ | LPER | LPPER | LPDER |
| (6) | SUS304 | — | — | LPES | LPPES | LPDES |
| (7) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV~ | LPED | LPPED | LPDED |
| (8) | SUS440C or 13Cr stainless | — | Treated Hardness: 50~55HRC | LPEC | LPPEC | LPDEC |